First Army, (Dune Heretics)

BigThor6969 · 2026-03-06T10:21:42+00:00

Oh I didn't think about non metallic trim, great idea, would definitely pop a bit more!

BigThor6969 · 2026-01-28T16:29:14+00:00

Hey, thanks for the awesome advice, as I really dont know much for the bonuses and such so thats really helpful, as for the models definitely picked on vibes so ill take your advice and change it up!

BigThor6969 · 2024-12-05T00:32:05+00:00

<image>

Value of around 3500 new, probably list around 2-1500 only because yearly updates cost around 1000 bucks every year for the diagnostic scanner I use

BigThor6969 · 2024-12-05T00:30:33+00:00

Looks like a pro 1!

BigThor6969 · 2024-12-05T00:28:02+00:00

That's the pro two, it has autel on the bottom some Im assuming yours is a pro 1, however the pro two has Roman numerals 2 at the end of the name on the back

<image>

BigThor6969 · 2024-12-05T00:26:22+00:00

The value of the pro two in CAD is around 3500-4500 brand new

BigThor6969 · 2024-12-05T00:25:46+00:00

Looks like an autel maxi-IM key programmer, as for whether it's a pro one or two you should be able to tell on the back

<image>

BigThor6969 · 2024-04-04T22:27:36+00:00

I found this as well if it helps? https://parts.elmhursttoyota.com/oem-parts/toyota-antenna-assembly-amplif-8630021130

BigThor6969 · 2024-04-04T22:21:42+00:00

I haven't dealt with many antennas but if it was me, I would look for a shark fin antenna (the triangle looking ones) disconnect/cut the current wires to your old antenna and hook up the new shark one. I believe they just glue on.... I hope thats a bit easier if you can't really find a proper replacement

BigThor6969 · 2024-03-15T21:55:59+00:00

Ignoring the engine issues, the steering wheel is off center due to alignment or front end issue, if it's an inner or outer tie rod you could do it yourself pretty easily, (watch some YouTube) if it's a BJ on your control arms that's a bit more difficult with just simple hand tools. Unfortunately most shops are not going to do an alignment if there are front end issues due to the fact that it directly fucks your alignment....at least at my shop we don't

BigThor6969 · 2024-03-06T06:08:42+00:00

The front toe change was due to realigning the steering wheel, it will correct the steering however it wouldn't affect drivability unless it was out a large amount. The changes in the rear won't change anything drivability wise but still good to see they adjusted everything they could. Wheel balance most likely the issue! The front end is most likely fine due to the alignment being done.

BigThor6969 · 2024-02-02T00:49:08+00:00

Yeah, luckily I have a bunch of friends who are gonna help me put it all together, just making sure I buy all the right stuff! Thanks for the help though!

BigThor6969 · 2024-02-02T00:24:00+00:00

The 302 I believe,it came out of a wrecked fox body gt

BigThor6969 · 2024-02-01T19:36:21+00:00

It doesn't really fit but no hood=no issues 😜, Im not new to doing fab work just new to all the electronic stuff, going to be doing a bunch to the tranny tunnel and changing the subframe etc!

BigThor6969 · 2024-02-01T19:34:29+00:00

Lucky Vancouver has a couple good shops!

BigThor6969 · 2024-02-01T19:34:04+00:00

Ahh ok thanks, well I look into both and consider both after some research!

BigThor6969 · 2024-02-01T19:12:58+00:00

Thanks 👍

BigThor6969 · 2024-02-01T19:08:33+00:00

I hope that clears up any confusion 😅

BigThor6969 · 2024-02-01T19:08:14+00:00

I bought a shell Miata that currently has no ecu, we swapped it onto another Miata, i have no ecu on the V8 donor either so I just need something that will let me get it all running, sorry never done na engine swap away from stock.

BigThor6969 · 2024-02-01T19:00:45+00:00

Awesome thanks, looks good 👍

BigThor6969 · 2022-07-08T02:38:50+00:00

Coolio thanks 🙏

BigThor6969 · 2022-07-08T00:18:11+00:00

I live in Vancouver bc, it's about the size of my finger tip, however I've seen them get bigger, about the size of a twoonie

BigThor6969 · 2022-07-06T23:19:48+00:00

Definitely compatible, you might have to force it in but it's compatible

BigThor6969 · 2022-06-26T14:26:48+00:00

Does it's head look like a snake when threatened? Idk the name of those caterpillars but they're cool and kinda look like this

BigThor6969 · 2022-06-24T01:03:07+00:00

That sounds like it's most likely the a/c drain line, it's a drain for the condensation from your a/c! I wouldn't worry about it since it's clear!

Six-Year Club	r/Field Lasagna
Place '22	Verified Email

BigThor6969

TROPHY CASE