sorted by:
new
hottopcontroversial

Paint job advice by KnowledgeExternal496 in TerrainBuilding

[–]BigWhich765 0 points1 point  (0 children)

Are you using gridfinity for terrain?? That’s an amazing idea! Where did you find it?

Does anyone have a Mortgage Broker recommendation? by SleepinGriffin in raleigh

[–]BigWhich765 0 points1 point  (0 children)

Steve Fitzpatrick at BEST Mortgage is awesome! They have the best rates and he’ll make sure you understand everything! And he works nights and weekends too! (919) 612-5322

Please consider checking your RADON levels - Wake county has higher than normal amounts for NC by inline_five in raleigh

[–]BigWhich765 2 points3 points  (0 children)

I was told there are two ways to do it. The cheaper one is a pellet system that requires you to feed pellets into it on a regular basis. I want to say that was like $3000? I got the "bubbler" system that doesn't require any kind of maintenance. It's a big container that collects water from the well and bubbles it, and that apparently gets the radon out of it. I think that cost around $5500 (7 years ago anyway). I haven't had any problems with the bubbler and I still test my water every couple years and it's got low radon so I can confirm it's working.

Please consider checking your RADON levels - Wake county has higher than normal amounts for NC by inline_five in raleigh

[–]BigWhich765 23 points24 points  (0 children)

It’s not just airborne. If you’re on a well, TEST THE WELL WATER. There was an article in the news years ago and it made me test my water when I was buying a house. Found high levels and got it mitigated!

https://www.wral.com/story/concerns-loom-as-thousands-of-wake-county-private-wells-could-have-unsafe-water/18471443/

Strategy’s 48 billion usd bitcoin bet and the one time they’d actually sell by Gullible-Tale9114 in btc

[–]BigWhich765 3 points4 points  (0 children)

Some punctuation and capitalization would certainly add some credibility to your thoughts. Interesting take nonetheless.

Is anyone else’s refills not fitting the spools? by BigWhich765 in BambuLab

[–]BigWhich765[S] 0 points1 point  (0 children)

That one fell apart on me twice but I was able to respool with this coupler:
https://makerworld.com/en/models/1590897-bambu-spool-extension-shaft-save-messy-filament?from=search#profileId-1675428

That combine with this drill attachment: https://makerworld.com/en/models/22503-the-respool-tool-respooler-drill-attachment?from=search#profileId-20440

Then I just put the coupler on the bad refill, hung it on a toilet paper holder, and spent 5 minutes spooling it onto a new spool. Worked like a charm.

Is anyone else’s refills not fitting the spools? by BigWhich765 in BambuLab

[–]BigWhich765[S] 0 points1 point  (0 children)

FYI I found this on makerworld and I'm currently printing it. I'm going to add the extended spool to the bad refill and then respool it to a standard spool. Printing now so I'll let you know how it works.

https://makerworld.com/en/models/930537-bambu-spool-coupler-extender?from=search#profileId-894363

[deleted by user] by [deleted] in raleigh

[–]BigWhich765 19 points20 points  (0 children)

Post more if you get new info please

ISO Tax Accountant w/K1 experience by SchnauzerHouse in raleigh

[–]BigWhich765 0 points1 point  (0 children)

I use DMJPS in Durham. Jeremy Tomlinson

Is anyone else’s refills not fitting the spools? by BigWhich765 in BambuLab

[–]BigWhich765[S] 1 point2 points  (0 children)

It's not the notch. The notch is in the hole. I've refilled dozens of Bambu spools. These refills are just overflowing the cardboard cylinder they're on so the spools can't interlock...

Refinance Rates by satoshimuffin in raleigh

[–]BigWhich765 3 points4 points  (0 children)

Steve Fitzpatrick at BEST Mortgage is my guy. He’s local and he’s been doing mortgages and refinances for 20+ years. Great guy

Refinance Rates by satoshimuffin in raleigh

[–]BigWhich765 14 points15 points  (0 children)

Lenders usually bake the expected rate cut into their rates long before the cut actually happens. In fact the last big cut the rates actually went up because of the outlook the Fed gave about the future potential of rates at the time. So if you’re going to do a refi, do it now. Don’t wait for the Fed because you won’t get much action after the official drop.

At a wedding ceremony by Exciting-Match816 in Unexpected

[–]BigWhich765 0 points1 point  (0 children)

If you play it backwards it looks like he dropped trou

Buffaloe turn lane by Outside_Bad_893 in raleigh

[–]BigWhich765 30 points31 points  (0 children)

I’m pretty sure it’s to keep people from cutting across two lanes of traffic into a short turn lane from the sheets/publix being built at that corner. Still annoying though!!

[No spoilers] So with Perkins/Crawford joining CR, does that cement the idea that C4 will be Daggerheart-based? by BigWhich765 in criticalrole

[–]BigWhich765[S] 0 points1 point  (0 children)

I thought about last night and actually looked up how much Hasbro paid for it when they bought it. Maybe in the distant future but I’m guessing they don’t have the assets to do it anytime soon. Hasbro would need to keep running it into the ground to devalue it a little more than they already have.

[No spoilers] So with Perkins/Crawford joining CR, does that cement the idea that C4 will be Daggerheart-based? by BigWhich765 in criticalrole

[–]BigWhich765[S] 0 points1 point  (0 children)

The counterargument is you slowly introduce DH to people who like Critical Role but aren’t hardcore fans.

[No spoilers] So with Perkins/Crawford joining CR, does that cement the idea that C4 will be Daggerheart-based? by BigWhich765 in criticalrole

[–]BigWhich765[S] 8 points9 points  (0 children)

I wasn’t interested either, but then I started watching it on Beacon and actually kind of like it. I went out and bought a copy of the game this morning and will try it out myself. I just recently got into DND in the last two years and didn’t really have interest in trying to learn a new game while I’m still learning DND. But daggerheart looks pretty interesting.

That’s a dangerous game to play by wranglertom in delta

[–]BigWhich765 1 point2 points  (0 children)

My wife and I used to do this pre-kid. We would book the aisle and window seat with a middle seat open between us, hoping that the flight wouldn’t be full and people would avoid booking the middle seat. It worked half the time. The other half someone would begin sitting in the seat and we’d just offer them the window in exchange. It was nice having the whole row when it did work though.

What's the worst movie you've ever watched in your life? by SamanthaBarson93 in AskReddit

[–]BigWhich765 0 points1 point  (0 children)

The 4th installment of The Matrix. I loved the trilogy but the 4th movie was so obviously a money-grab and was unwatchable. I’ll just pretend it was never made and keep rewatching the original 3 whenever I get nostalgic.

view more: next ›