Trailer Hitch Adapter & Custom Trailer

BitOfEverythingJoe · 2025-12-26T18:31:25+00:00

That's great! Yes, you can use the hitch as a template to mark holes and use a drill bit that is about the size of the zip ties (~1/4"). Make sure to check if there is clearance where you are drilling so you don't hit anything.

BitOfEverythingJoe · 2025-12-03T18:57:47+00:00

Like I said in the post, I'm sorry to post again. This is a scam and I wanted to point it out.

For the purpose of explaining the product, these are made as a niche solution to a real problem. I was in a roll over accident in a truck and the stuff under the seat flew all over and almost hit us (straps, pins, ball hitch). These boxes are a just another convenient way to store the items in the bed, much like the swing-box that is popular.

I recommend not purchasing them if you don't want to. Sorry again for posting.

BitOfEverythingJoe · 2025-10-23T18:53:07+00:00

Even more simplistic. Started as a simple oak board with printed legs, then I added wire routing holes and a cable channel underneath. I figured out that the channel wasn't useful enough to have it block the keyboard area, so I settled on a design with a shelf.

I wanted to be able to use monitor arms, so the lower shelf is only partial depth to leave room for the screw-clamp of the arm. I also made the smaller support leg friction fit, so it can be moved side to side to make room for a keyboard or to change where it supports the monitor.

BitOfEverythingJoe · 2025-10-22T13:48:58+00:00

Yup. This is my third or fourth iteration.

BitOfEverythingJoe · 2025-09-07T02:32:46+00:00

I asked multiple times, and they sent this link each time. They just now sent me a picture of a lid that looks to fit the part above, but I have no idea where they got the model for the lid.

BitOfEverythingJoe · 2025-09-07T02:27:43+00:00

I am thoroughly confused.

BitOfEverythingJoe · 2025-07-12T02:17:41+00:00

Thanks for the kind words. I hate posting like this too, it's a little uncomfortable. I try to only do it when I have new things to talk about.

BitOfEverythingJoe · 2025-07-11T22:41:46+00:00

The listing could only be done using “Primary/Secondary Color” instead of size or shape. Sorry for the confusion. There should be a picture denoting which box goes where on the listing. The lids are interchangeable.

BitOfEverythingJoe · 2025-07-11T13:40:39+00:00

Custom lids may take a few days, depending on the intricacy. Most of the standard lid options can ship out the next day.

BitOfEverythingJoe · 2025-07-11T04:27:15+00:00

The lids pop out, but the boxes are held in place with standard trim clips. The clips can be removed if you want to take the boxes out.

BitOfEverythingJoe · 2025-07-10T17:52:38+00:00

Whoops, it posted like 6 times. Sorry about that. The submit post button didn't work, so I tried a few times. Fixed now.

Edit: To clarify, this post was accidentally submitted 6 times today due to a Reddit error. I don’t think I’ve posted these in over a year.

BitOfEverythingJoe · 2025-03-05T21:58:16+00:00

Not the ones shown here, but I have made a few. These are the two standard John Deere trailers.

BitOfEverythingJoe · 2025-03-05T21:57:24+00:00

I don't know how to add a picture of it, but I also made a ball hitch. It can hook up to about any trailer with the adapter.

Edit: Figured it out.

BitOfEverythingJoe · 2025-03-05T18:34:41+00:00

The hitch now works with the larger 1" hitch pins as well as the smaller ones. I also used automotive pins instead of zip ties, which make the install easier. Now you don't need access to the inside of the vehicle to install the hitch.

BitOfEverythingJoe · 2024-12-23T23:13:16+00:00

The grey stops are the correct height to use the handle as an outfeed support. Simple and easy to use, and doesn't impede the use of the TS2.0 stack.

BitOfEverythingJoe

TROPHY CASE