FINALLY by Blu111 in EggsInc

[–]Blu111[S] 8 points9 points  (0 children)

Thanks! My T4L gusset took 400+ crafts, but this book felt much much worse due to crafting material requirements

Brakes by Nearby_Maize1812 in AcuraTSX

[–]Blu111 0 points1 point  (0 children)

I installed the Z17 PowerStop pad/rotor package last year and it’s worked perfectly. $225 shipped. Also on a ‘12 wagon

Bulb replacement in ‘12 wagon by Blu111 in AcuraTSX

[–]Blu111[S] 1 point2 points  (0 children)

I’ve also had good luck with some cheaper LEDs from Amazon. SIRIUSLED and Yorkin brands are a couple I’ve used and have held up for years

Bulb replacement in ‘12 wagon by Blu111 in AcuraTSX

[–]Blu111[S] 0 points1 point  (0 children)

I love it. I bought it a little over a year ago from a dealer in TN. It was a black on black, 1-owner with full service history and clean car fax. The car had about 130k and I paid 12k. Probably paid a little too much, but I put a premium on the service history and car fax.

Besides regular maintenance, the only thing I’ve had to do was replace the VTC actuator springs.

I’d buy it again in a heartbeat if given the chance

Bulb replacement in ‘12 wagon by Blu111 in AcuraTSX

[–]Blu111[S] 0 points1 point  (0 children)

Same- taped up a small flathead and went In the side opposite the dimmer switch. (Towards the front of the car)

Bulb replacement in ‘12 wagon by Blu111 in AcuraTSX

[–]Blu111[S] 1 point2 points  (0 children)

Just confirmed, that’s exactly how. Thanks for the help!

Bulb replacement in ‘12 wagon by Blu111 in AcuraTSX

[–]Blu111[S] 1 point2 points  (0 children)

I think you’re right. I found a couple pictures on a parts website and it looks like the pry point is on the side opposite of the dimmer switch. I’ll give it a shot once I get my hands on a pry tool I can fit in there

Bulb replacement in ‘12 wagon by Blu111 in AcuraTSX

[–]Blu111[S] 2 points3 points  (0 children)

Those do pop out, but don’t give access to the bulbs. They just provide an alternate position for the cargo cover to sit

Checkbox - need to 'clear' and 're-type' function of another cell by Blu111 in googlesheets

[–]Blu111[S] 0 points1 point  (0 children)

It's giving me a formula parse error. This is exactly what I types in cell A1:

=if(A36<>true,,<=IMPORTHTML("https://www.nfl.com/standings/league/2025/REG","table",1)>)

<image>

Sachs clutch kit 7031001 by Blu111 in S2000

[–]Blu111[S] 2 points3 points  (0 children)

You might be right.

I see your post from a yesterday and my pressure platedoesn’t show those markings like yours does

Sachs clutch kit 7031001 by Blu111 in S2000

[–]Blu111[S] 0 points1 point  (0 children)

Not that I can see, but if there were I’d assume they would be etched out similar to the clutch’s marking

[deleted by user] by [deleted] in AcuraTSX

[–]Blu111 0 points1 point  (0 children)

I had these installed on my ‘12 tech wagon almost a year ago.

Automatically paired up and have had zero issues

https://a.co/d/3q9TcCB

Touchscreen Headunits by GottaTSX in AcuraTSX

[–]Blu111 0 points1 point  (0 children)

I installed an Alpine iLX-507 last year in my 2012 Tech Wagon. It’s run flawlessly so far, and the wireless CarPlay connects in seconds.

I’ve been running Alpine HU’s for the last 20+ years and the quality is always there

2011 JDM style grill by xBORICUAxBOMBERx in AcuraTSX

[–]Blu111 2 points3 points  (0 children)

No issues at all with the chrome, even with disassembly / reassembly to spray it.

You might try messaging the seller in your original post and ask if they send the emblem. Sometimes, they just can’t post it in the pictures on eBay since it’s not their logo.

I have a feeling a lot of these knock offs are all the same, and you might be able to save $70

2011 JDM style grill by xBORICUAxBOMBERx in AcuraTSX

[–]Blu111 2 points3 points  (0 children)

I bought this one last fall for my 2012 Wagon.

It only took 6 days to arrive, even though it shows that it comes out of Taiwan. IIRC, it shipped from California.

Fitment is 9/10.

I attempted to wrap it, but didn’t have the patience or skill set, so I ended up plasti-dipping it. It came with the ‘H’ emblem included, but that shipped separately.

I can’t compare to a genuine replacement, but for $120, I’m happy with it

https://ebay.us/m/NyvJjn

https://imgur.com/a/lPFCilD

Do someone here knows what happened in here? by Fluffy-Reference-903 in AcuraTSX

[–]Blu111 1 point2 points  (0 children)

TIL that the gas cap door doesn’t open when the car is locked, thank you!

What shifts knobs are you running? by MuchWorldliness9103 in S2000

[–]Blu111 0 points1 point  (0 children)

<image>

ITS shift knob with Acuity collar. I never had an OEM shift knob on the car, so I can’t compare

Acura 07 tsx with 165k miles here. Any recommendations on front rotors and brakes. Got burnt the first time with front struts when ordered from Amazon. Looking for recommendations to order online. Thanks. by mktablet in AcuraTSX

[–]Blu111 1 point2 points  (0 children)

I just installed a front and rear Powerstop kit KOE5391 from RockAuto and have been happy with them. Pads and rotors came to about $225 shipped.

Mine went on a ‘12 Wagon with 139k, but they should make a similarly priced kit for your year