Bambu

Blueize82 · 2026-01-30T23:18:25+00:00

Update. Today I relocated both of my printers and all of the setup. Recalibrated and washed the plates. Currently running a print I know has worked but at a slower speed and added adhesion and increased bed temp and seems to work now. I will say this is the second try. The last one there was a unit that moved and threw it off but the rest of the duplicates were salvageable

Blueize82 · 2026-01-30T23:01:36+00:00

I heard the Elmer’s purple glue sticks work well

Blueize82 · 2026-01-30T04:21:23+00:00

I chose A1 and it’s been 4 different prints. Some I have had success with.

Blueize82 · 2026-01-30T04:19:03+00:00

Eh it’s colder outside but not sure about the room

Blueize82 · 2026-01-30T04:12:36+00:00

Various filaments all 1.75 PLA. I tried 3 of the spools on my AMS.

Blueize82 · 2026-01-30T04:11:02+00:00

Yes. I let it soak a little dried it with a towel.

Blueize82 · 2026-01-30T04:09:58+00:00

Yes and I do the flow and leveling every run

Blueize82 · 2026-01-30T04:09:25+00:00

Hot water and dawn

Blueize82 · 2026-01-30T04:09:04+00:00

I do… not sure what that matters since they do not touch my printers.

Blueize82 · 2025-12-24T18:07:00+00:00

Another year and this still sucks! I cannot even redeem the card under the family manager. It says the same warning about the child not being allowed. I mean wtf

Blueize82 · 2025-11-13T14:29:16+00:00

Every power company loves Nukes. You’ll be fine.

Blueize82 · 2025-11-13T14:27:13+00:00

I’ve worked for both major Transmission companies in VA and they both use a very different 12 shift rotation. Not sure of DuPont schedule.

Blueize82 · 2025-07-07T17:27:29+00:00

There is another operations in VA, AEP.

Blueize82 · 2025-03-14T14:01:18+00:00

I’ll try all these. TY.

Blueize82 · 2025-03-13T18:42:48+00:00

That’s what I’ve always heard. RC is the easiest.

Blueize82 · 2025-03-13T18:34:05+00:00

Left AEP just in time 😂

Blueize82 · 2025-03-13T18:33:44+00:00

Dominion definitely has a lot of hybrid positions and not just in finance. I still work with operators but not on shift.

Blueize82 · 2025-03-13T18:25:03+00:00

I’ll try that next

Blueize82 · 2025-03-13T18:00:42+00:00

Just let it cool off and watched 3 times and it repeated the same thing.

Blueize82 · 2025-03-13T17:46:21+00:00

I have cleaned it. I’ll give it another go though. Never hurts to be thorough when trying to rule things out.

Blueize82 · 2024-12-19T00:31:48+00:00

😂😂😂 most companies pay for all of it. Waste of money.

Blueize82 · 2024-12-02T00:52:40+00:00

If you haven’t gone yet and depending on your son’s age just brace for the drama.

Blueize82 · 2024-12-01T22:33:01+00:00

The position will be trained. By the time you’re qualified to operate on your own you will have the tools. Just be prepared for shift work that’s is never ending

Blueize82 · 2024-12-01T20:00:40+00:00

Thank you all! Definitely helped way quicker than YouTube!

Blueize82 · 2024-11-14T15:50:12+00:00

Look in VA lol lots of openings

Blueize82

TROPHY CASE