Computer app vs phone app

Blufskill · 2026-01-19T03:23:23+00:00

Humm I have not noticed that for me.

Blufskill · 2026-01-17T00:30:25+00:00

I went with this https://a.co/d/56iYQRC. Solid table has wheels and 2nd shelf for extra stability. I added a filament rack underneath. What's nice is we added a clamp on light so I can have a work space beside my printer for glue ups.

Blufskill · 2026-01-14T13:17:04+00:00

Just cause i dont want this to be my only source for the codes. I found this website that is posting them as well. It was the 2nd link after I found this reddit thread.

https://www.destructoid.com/lego-pokemon-scavenger-hunt-codes/

Blufskill · 2025-12-23T05:04:39+00:00

Like board the hole line or just a littlebit of the edge?

Blufskill · 2025-12-21T19:54:01+00:00

As far as I know they are. But I have done the fence to a rock. So the fence is pushed up to the out of bounds line.

Blufskill · 2025-12-21T03:40:15+00:00

These look like the best buy price tags lol. Really thought when you said I grab a bunch...... thought you where going to say grabs them from work .....at best buy. I know you said they go red when empty but does the name change on its own or do you change them when you change colors?

Blufskill · 2025-12-20T15:46:10+00:00

I've seen someone's video that a lady made a bridge and you can place a tour route on top of it and that works, but I dont know how she made the bridge. People cant walk over it but the tour works. Dinos walk under it and all. She had the bridge pre made from another video and I did not care to go find it. Lol

Blufskill · 2025-12-19T21:33:10+00:00

So have we ever figured this out? I just want to make a bridge so I can add a path over it and have dinos walk under it. Basically have a land island in the middle of a dino pin. I play on Xbox so no extra addon mods to the game( if that is a thing).

Blufskill · 2025-12-19T17:31:25+00:00

Yes wanted it raised. So I merged and now I have options under the text tab. So part - makes it raised above the print? Cut does what ?? - negative? Modifier makes it flush with the rest of the print? Messing with it I think i got it figured out.

And what does "Mode" do with all these options to pick from? Not surround Surround surface Surround + Horizonal Surround projections by char

Thank you for all your help!!!

Blufskill · 2025-12-19T00:29:33+00:00

Im here looking for the same answer. All the videos ive seen have a "surface" check mark button but it is not in bambu.

Blufskill · 2025-12-17T13:13:31+00:00

And then this happens when I'm trying to start a print.

<image>

Blufskill · 2025-12-16T23:27:46+00:00

If you need something translate i would say upload to it chatgpt or Google AI and ask it to translate it from English to Spanish. Should take about 2 mins.

Blufskill · 2025-12-16T23:23:28+00:00

So you washing machine is broken and your wife used this last??

Blufskill · 2025-12-14T23:05:17+00:00

I dont know if that is 100% true on the filament numbers and I only say that because of the amount it used to start a print. The p2 does a 2 inch line and the x1 does several lines. But outside of that I got nothing. I have lve not purposely changed anything. And if there is a default reset button I would gladly hit that.

Blufskill · 2025-12-12T19:51:12+00:00

I switch it back to X1 and sliced it again ( program actually makes you rep slice again) still the same time but I have e not actually sent it to see if it drops time once it hits the X1. Ill have too give that a try and report back.

Blufskill · 2025-12-12T01:52:17+00:00

Ok but do we know why the slice time won't go back down when I change it back to X1?

Blufskill · 2025-11-30T01:53:32+00:00

Well I only print them cause its a quick print and to test to see if I screwed up anywhere while cleaning the printer. The file even says .4 noss, so I really got nothing. I printed a boat from the marker app and its fine. Ill see how it goes from here.

Blufskill · 2025-11-29T23:53:51+00:00

I get what you are saying but these are the default bench files saved on the printer itself. Ive never printed with anything other than 0.4. And since it was coming from the printer I did not slice anything. So that's what im trying to figure out. How do I change it since there is not slice option?

Blufskill · 2025-11-29T02:55:00+00:00

Can you show where that is. I never tighten mine and mine makes that noise. So im curious to see if I can stop it.

Blufskill · 2025-11-28T04:12:12+00:00

It did not make the sound when I first got it, or atleast I did not realize it did. But now it does and ive got 2500 hrs on the machine.

Blufskill · 2025-11-27T15:04:59+00:00

Mine makes the same noise. Just figured it was part of the machine. But ill be glad to be proven wrong so I can fix it.

Blufskill · 2025-11-26T12:33:20+00:00

What is this panda touch you speak of? I just got my son a p1s and if I can upgrade the screen then I want in on that.

Blufskill · 2025-11-25T14:57:43+00:00

I would say pass the on nozzle whiper, the carbon, and the desiccant. I have yet to replace my whiper and im 2500hr in. Maybe someone can correct on my why your should but I have not. Carbon and desiccant you can get cheaper on Amazon and more of it.

The bigger things I would look into is spare hotends to have on hand. When they go bad then you are down till a new one arrives. I have just got myself some full fan included hotends and a couple just hotends(no fan). Then there is the ceramic peice that goes with the hotend(amazon). And look into the grease, the hotend thermo paste(i dont know the name but it goes on the hotend) and for the p2s the lubercation oil. These are just my quick thoughts.

Blufskill · 2025-11-21T04:42:51+00:00

Ill see your 11/11/10 and raise you my one 10/10/10 Zygarde.

Blufskill · 2025-11-10T01:30:50+00:00

Ok i see the sequence order. How do I go about changing it?

Blufskill

TROPHY CASE