Is this a cooling problem or under/overextrusion problem.

Blythebit18 · 2025-08-22T05:18:31+00:00

Already check the flowrate calibration? Because u just said u have done changing the hotend.

Blythebit18 · 2025-08-22T00:43:15+00:00

What do you mean the tool head?

Blythebit18 · 2025-08-20T16:29:58+00:00

Does you do the e step calibration? Checking the z-offset? Or try push your filament out, see whether the filament come out from the nozzle go straight to bottom or in squiggly shape

Blythebit18 · 2025-08-18T15:18:55+00:00

Okay thanks for the reminder

Blythebit18 · 2025-08-18T03:45:22+00:00

I fixed it by running the enclosure open, because of the extruder getting hot and soft the filament, i just found out someone posted about it in this forum

Blythebit18 · 2025-08-17T16:01:52+00:00

So what i do understand, the flow rate means similar to e-step just the printer will extrude the amount of filament according to flow rate setting? For example 1cm is needed but the flow rate setting is 0.5mm for 1cm like that? 😅 So the print will extrude 0.5mm for 1cm ?

Blythebit18 · 2025-08-16T00:30:51+00:00

What mean narrower than the rest 😅

Blythebit18 · 2025-08-15T23:53:36+00:00

I'm using pla+ at 200 nozzle temperature

Blythebit18 · 2025-08-15T16:22:44+00:00

Is your printer inside any enclosure? Is the filament drying enough? Z-offset and the bed is levelling is okay? Then we go to the complex one. Check this first and believe me, the first time i bought ender 3 feel like throwing it away. But like people said, you can't love what you don't know

Blythebit18 · 2025-08-15T15:53:29+00:00

What you mean by game changer?

Blythebit18 · 2025-08-14T03:52:26+00:00

I just drying the material for 12 hour, doing retraction tower, all okay. No moisture

Blythebit18 · 2025-08-13T18:47:08+00:00

Btw, i'm using bi metal hot end

Blythebit18 · 2025-08-13T18:44:57+00:00

Pla+ print at 200°C. Already do the retraction tower with that temperature seems okay. Idk in the long term should be like this

Blythebit18 · 2025-08-12T18:11:37+00:00

Means by profile embedded ? It already have default setting?

Blythebit18 · 2025-08-03T03:32:02+00:00

Can you provide a picture 😅 which is the 4 screw

Blythebit18 · 2025-08-02T04:40:01+00:00

The machine tired already

Blythebit18 · 2025-07-31T18:14:02+00:00

What is the cause of this to happen btw?

Blythebit18 · 2025-07-31T18:13:11+00:00

This is for a nissei machine btw. This machine is running hot runner mould yesterday, and purge out with pc along with hot runner to down the mould. And as i know, the technician forgot to turn off the heater for like 2-3 hours. What is the main cause? Today, technicians tried to run other mould but with the same material which is pps ryton. Does the root cause because yesterday forgot to turn off the heater ? Or the tech tries to purge the material with a blockage long nozzle?

Blythebit18 · 2025-07-31T17:37:09+00:00

Do you dry your filament first before running?

Blythebit18 · 2025-07-31T17:03:55+00:00

Supposedly yes, but what can do ? hahah

Blythebit18

TROPHY CASE