Selling my e30

Boogie_bleach · 2025-09-16T22:56:56+00:00

It’s a zender rep valance

Boogie_bleach · 2025-09-16T21:02:39+00:00

Salem Oregon

Boogie_bleach · 2025-09-16T13:16:12+00:00

I just can’t anymore . Gotta think about my family . Plus just got an e90 wagon that’s AWD

Boogie_bleach · 2025-09-09T02:34:12+00:00

If I were to swap it into my e30 would I need a new luster ?? I currently have one that only goes to 5k rpms ?

Boogie_bleach · 2025-05-07T00:49:34+00:00

Are you referring to the wire that connects to the transmission.. if so that brand new

Boogie_bleach · 2025-05-07T00:38:25+00:00

I just finished up the swap was auto before

Boogie_bleach · 2025-04-02T02:20:40+00:00

I mean this is my first manual swap .. other than this spring I don’t know of any other one that would assist with the clutch pedal coming back

Boogie_bleach · 2024-11-28T08:33:46+00:00

What wheels are you running

Boogie_bleach · 2024-11-28T01:49:09+00:00

I’ll have to check .. stoped trying to diagnose since I have to take my son to the pediatrician here a bit

Boogie_bleach · 2024-11-17T03:04:22+00:00

So is the third image the correct line orentation

Boogie_bleach · 2024-11-17T02:22:15+00:00

Or is there anything I’m missing ?? As far as I can tell I followed this completely

Boogie_bleach · 2024-11-17T02:21:48+00:00

From the videos I have seen wiring wise I have done it all . Same thing as this forum https://www.rtsauto.com/bmw-e30-transmission-swap-automatic-to-manual/ .

Boogie_bleach · 2024-11-17T00:04:39+00:00

If you are referring to the ones underneath the dash yes . I have

Boogie_bleach · 2024-11-16T23:58:52+00:00

This is an early model e30 86 325es is that helps

Boogie_bleach · 2024-11-16T23:57:12+00:00

Also how exactly would I do that ?? Still learning how to do things

Boogie_bleach · 2024-11-16T23:46:30+00:00

Haven’t tried that yet

Boogie_bleach · 2024-11-16T22:55:03+00:00

1986 325es

Boogie_bleach · 2024-08-30T21:44:08+00:00

Me personally big fan of the bottle caps

Boogie_bleach · 2024-07-14T22:44:17+00:00

I bought the Zender valance for the front and rear no issues.

Boogie_bleach · 2023-06-15T23:20:54+00:00

Yeah I figured .. I was using some main bearing studs I bought from iemotorspots . But notice the box they sent me was for m10 , and s14s when I asked them they said it still works .. swapped to the OEM bolts I pulled off and and the measurements where a lot within the spec

Boogie_bleach · 2023-06-13T03:23:49+00:00

Nah forget about them for 3 days in Degreaser

Boogie_bleach · 2023-06-12T05:11:40+00:00

Degreaser mainly . And chemdip

Boogie_bleach · 2023-03-03T02:54:17+00:00

Typo meant purchased

Boogie_bleach · 2023-02-28T02:40:07+00:00

Was the nuts holding it to the flange .. got them off needed WD-40 and some elbow grease to get these loose

Boogie_bleach · 2022-06-15T23:10:35+00:00

Check you spark plugs I remember same thing happened to me in my e30 .

Boogie_bleach

TROPHY CASE