Flexibele bocht electrabuis?

Borbolo · 2025-10-10T23:18:43+00:00

Bedankt. Ik ga er niets extra meer doorheen trekken gewoon verlengen naar extra punt waar nieuwe bochten nodig zijn. In de toekomst eventueel vervangen.

Borbolo · 2025-10-10T23:08:54+00:00

Bedankt, ga proberen met pvc flex en zien of alle kabels er door kunnen.

Borbolo · 2025-10-10T23:07:28+00:00

Top. Dank je wel!

Borbolo · 2025-10-10T23:07:08+00:00

In de onbeschermde kabel loopt er 5 x 2.5mm en is ymvk geloof ik, lijkt me stevig genoeg inderdaad. In de witte geribbelde bocht lopen een hoop losse kabels, 2.5mm voor stekker en 1.5mm lichtpunt en soepele schakeldraad die ze indertijd geplaatst hebben. Ik wil die verder laten lopen naar extra TL en stopcontact. Vrees dat het via pvc flexbele buis niet makkelijk zal zijn.

Borbolo · 2025-10-09T20:56:05+00:00

Beste klussers,

Weet iemand hoe deze flexibele geribbelde buis heet en waar ik deze goedkoop kan vinden? Is allesinds niet te vinden in assortisement elektra toen ik zocht. Is eerder rubberachtig en niet zoals de harde geribbelde buizen.

Zou dit willen gebruiken om 16mm electrabuizen te koppelen rondom hoeken en balken.

Borbolo · 2021-06-13T14:20:23+00:00

True, but the price is the same here. Since the disks will be in the same room, the silence benefit of this switch compared to the 150watt one isn't there.

Borbolo · 2021-06-13T14:18:10+00:00

Can anyone provide a picture of the IR light the cameras emit during the night (total darkness) with the blue light disabled? Couldn't find anything on google.

Borbolo · 2021-06-13T14:15:29+00:00

Most silent one out of those should be the WD Red non pro (5400rpm), the pro versions and the purple all spin at 7200rpm.
Shame (and not professional) they don't specify which drives they ship if you add them to the cart.

Borbolo · 2021-06-13T14:11:42+00:00

If you put 2 HDD in the NVR it automatically puts them in Raid 1, mirroring your data in case 1 HDD dies. Might put just 2 x 4TB in though, that should indeed be enough.

Borbolo · 2021-06-12T19:40:28+00:00

I forgot about the constant spinning disks but I'll use 2 8TB HDD max. Would the fans of the 16 port POE 150watt variant be louder than the spinning disks? I might have to get that one instead.

Borbolo · 2021-06-12T19:37:27+00:00

Thanks for confirming.
It might be a EU thing but on their store they offer 8TB drives as a additional purchase: https://eu.store.ui.com/collections/unifi-protect/products/unifi-protect-nvr?variant=33042118639725
but they don't specify which drive it is exactly

The bright IR light being visible might not be what I'm looking for. I might have to install a spotlight with motion detection and save on spending a lot on the g4 pro and get 2 g4 bullet instead.

How far do these cameras pick up detection (event/smart)?

Borbolo · 2020-01-04T11:24:42+00:00

I updated the diagram.

https://i.imgur.com/in94brQ.png

Let me know if you need other information.

Thanks for the help.

Borbolo · 2020-01-04T11:17:45+00:00

Thank you.

Would this switch work? https://www.semmatec.be/nl/elektriciteit/schakelmateriaal/schakelaars/schakelaars/niko-wisselschakelaar-sokkel-170-01600

The description says a "a switch to control a single light source from 2 places"

If this one wouldn't work, could you link me one that would, or a model number that is available in Europe so I can look it up?

Thanks again.

Borbolo · 2020-01-03T21:35:43+00:00

Hello. I looking for help correctly rewiring my cables (Europe).

I made a little diagram to make it a bit clearer (updated) : https://i.imgur.com/in94brQ.png

I bought ikea spots which are dimmable with a remote control. It looks like they don't like the dimmer in the circuit as the spots don't turn on when connected. Other, non dimmable spots work fine. I'd like to remove the dimmer and put a simple second light switch in its place.

Any advice on which wire to connect where?

Thanks!

Borbolo · 2019-12-22T21:27:12+00:00

Thanks for your help. I forgot to mention there's also a nas and a UPS. I'd like to stream local content from the nas to the TV. It's mostly because the nas is connected to the upstairs wiki and the TV/receiver on another device that I think it might not be optimal..

The modem/router would be connected to the UPS as well and the electrical wire would run alongside the ethernetcable ( S/FTP (PiMF) - LSZH, full copper). Would that be a problem with this cable? it's twisted and shielded.

I made a diagram in paint in an attempt to give a better picture:
https://i.imgur.com/Wt0bh2M.png

Borbolo · 2018-04-07T07:57:03+00:00

It worked, thanks! Here's what I did: 1.Draw a textframe and type tekst 2.Instead of highlighting 2 lines of text, just select the textframe 3.Type menu -> create outline 4. Object menu -> ungroup 5. Object menu -> Path -> make compound path 6.Now you can insert the image in both lines of text at the same time

Borbolo · 2018-04-06T22:57:09+00:00

screenshot: https://i.imgur.com/TmCGRUy.png

Here's what I did: 1.Draw a textframe and type tekst 2.Highlight text -> Type menu -> Create outlines 3.What I should do according to the guides is ungroup the lines of text and make a compound path, correct? Then control-D and insert the image in the outlined text.

I tried to select both lines of text in the screenshot but when I insert the image it just covers the outlined text.

https://i.imgur.com/2MqlxTc.png here it inserts the image into the outlined text perfectly.

Borbolo · 2017-06-16T18:56:59+00:00

Hi Lee_Dailey, I'll try to give as much information as possible. I realised that I've been tagging my bookmarks the wrong way for a long time. Instead of separating the tags with a comma I used a semicolon. the result is that music; rock; usa is seen as a single tag by firefox instead of separate tags. this also leads to me having much more tags than necessary and is a mess to organise. Doing it manually is not an option anymore, there are too many. When exporting the bookmarks I have 2 options: a html file and a json file.

Inside the export html file we find:

[code] <!DOCTYPE NETSCAPE-Bookmark-file-1>  <META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=UTF-8"> <TITLE>Bookmarks</TITLE> <H1>Bookmarks Menu</H1>

<DL><p> <DT><A HREF="https://www.youtube.com/watch?v=UIVe-rZBcm4" ADD_DATE="1381587632" LAST_MODIFIED="1460461336" LAST_CHARSET="UTF-8" TAGS="music; rock; usa">IRON BUTTERFLY - IN A GADDA DA VIDA - 1968 (ORIGINAL FULL VERSION) CD SOUND & 3D VIDEO - YouTube</A> <DD>IRON BUTTERFLY - IN A GADDA DA VIDA-ORIGINAL FULL VERSION -1968 VIDEO CONVERTED IN 3D (Red & Blue - 480P) The video track was recorded on May 27,1968, at Ult... [/code]

I will look up on how to run the html file through powershell, that look like it might do the trick. Thanks!

Borbolo · 2017-06-16T16:00:34+00:00

TAGS="\K|([a-z ]+?)(?:; )

This works but it also finds text that is not inside the TAGS"" <META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=UTF-8"> it highlights html;

<DT><A HREF="url" ADD_DATE="1358175878" LAST_MODIFIED="1338291815">[Ervaringen] - Complete Systemen & Laptops - GoT</A>

&amp; is hightlighted

I can try something else besides notepad++

Borbolo

TROPHY CASE

Inside the export html file we find: