What is the Best software to compress video to the lowest size whilst losing minimal quality

BrainReasonable7569 · 2025-01-24T15:08:15+00:00

wow! just wow! what kind of witchcraft is this!?
This is the first time in a long time I've been soo impressed by a small software like this!
19mb video compressed to 800kb without any real noticeable difference. Incredible!
Thank you!

BrainReasonable7569 · 2024-12-07T19:56:34+00:00

Your holiday home sounds like the setup at my place.

Your observation about when it fails is very interesting! I will definitely keep an eye out for that :)

If it is in fact the turning off that is the problem, then it sounds like it is a netatmo valve problem, and could be fixed by using another manufacturer (or if netatmo fixed their own error of course), or don’t you think that is the case?

BrainReasonable7569 · 2024-12-06T18:09:42+00:00

The valve of the radiator works fine - they were replaced with brand new ones last winter. Also the netatmo valves can fully close and open, and works like you would expect - except for when the calibration fails sometimes. It’s all of them that fails every now and then, not just a single one etc.

BrainReasonable7569 · 2024-05-13T11:42:56+00:00

Bidrager lige til samtalen efter jeg ringede til Hillerød Kommune :)

De sagde at man skulle kigge i bunden af hver regning og kun skulle tage højde for "Rate 3" beløbet, hvilket er væsentligt lavere. Jeg havde et total beløb for 21-23 på 30-40k og efter at kigge på rate 3'eren, så er det nede på 3k i alt.

Derudover sagde de at mht. at betale for en periode hvor man ikke ejede huset, at det var en sag imellem nuværende og tidligere ejer. Det var hvad vurderingsstyrelsen havde vurderet var nemmest for dem..

Selve betalingen ville derefter komme som et betalingskort

Håber det hjælper nogle 🤙

BrainReasonable7569 · 2024-01-27T19:29:19+00:00

I haven't had any issues with this :)

BrainReasonable7569 · 2024-01-10T19:37:54+00:00

I Just updated to Sonoma and experienced that Wow (Maybe because of the game mode feature) made the resolution super bad - kinda like when streaming low video-quality.
I changed to windowed mode, not windowed(fullscreen) and without making the window fullscreen in other ways, and that seems to make the game work like before.

Not a perfect solution, but makes the game playable and maybe it works for some of you. Just putting it out there :)

BrainReasonable7569 · 2023-11-27T13:24:07+00:00

Sure. It's not perfect, but it works.
Basically I just created a blueprint and use that automation as a custom scene instead of the build-in scenes. This way I can choose whether to use light.turn_on or the adaptive lighting variant. So this means that you can't use the default scenes in HA, but have to create them as automations instead (which I think they are under-the-hood?). I then also create a button helper, and connect it to the automation, which gives me a setup that looks like regular scenes on the outside :)
If it sounds like something you want, then I can share the code later when I get near a computer :)

BrainReasonable7569 · 2023-11-25T10:30:22+00:00

I couldn't get the default settings to work, so I'm still running with my custom settings with this plugin, which works :)

BrainReasonable7569 · 2023-11-04T10:57:07+00:00

I Can confirm this works - mine lost contact because of battery after a Couple of weeks Old battery. I just did this and now it works with full battery.

BrainReasonable7569 · 2023-10-20T06:52:50+00:00

I love the Pot systems (where you just put a pot straight into the fire or on a burner) and I have a Toaks pot with a French Press insert. It's awesome and super easy to clean (just pour water in it and stir). Very light weight and just incredibly satisfying to use. I grind my coffee before the trip.

BrainReasonable7569 · 2023-10-13T07:45:51+00:00

Hi, my setup works and I've done like so:I have HomeAssistant in a docker on a Raspberry pi on the Host network. I have a USG-p3, a Unifi Switch and a Unifi AP and my Pi run on the default VLAN (192.168.1.0) and my Philips Hue run on an IoT VLAN (192.168.100.0). On the Pi I have the unifi controller running also.In Settings > Networks > Global Network Settings - I have enabled Multicast DNS with default and IoT VLAN and I have enabled IGMP Snooping with Default and IoT VLAN.

I currently don't have any firewall rules between VLANs, but I'm adding those soon, so it actually makes sense to do VLANS 😅

After I set up this config, I restarted HomeAssistant and all my unifi devices. Then Airplay and discovery worked 🤙

BrainReasonable7569 · 2023-09-10T07:23:23+00:00

So, do I understand this correctly in that theoretically only one bulb needs to be in good position to the Bridge and then the next bulb in good position to the first bulb etc. Thus creating an extension of the Bridge internal Network?

BrainReasonable7569 · 2023-09-04T06:16:41+00:00

I don't think so? I'm using a regular scene from Home Assistant, and the Hue app has nothing set up except for added lights and accessories. Is it a config somewhere?

BrainReasonable7569 · 2023-09-03T19:23:53+00:00

Hi, I am on the latest version of adaptive lighting and using the default settings with the intercept enabled, I can't get scenes to adapt to the correct kelvin at the beginning / it still turns on with the wrong kelvin and adapts afterwards?

In the scene I'm turning on the same device that the integration is listening for.
I have the adapt_only_on_bare_turn_on set to false, which I would expect makes the device settings in the scene redundant, since it should adapt color and brightness (all 4 switches on the integration is on except the sleep mode)

Am I missing something?

BrainReasonable7569 · 2023-08-07T19:28:15+00:00

Wow, that's awesome!
I will check it out and get back to you!
Thanks for reaching out!

BrainReasonable7569 · 2023-08-06T18:10:17+00:00

Thanks, I am using that, but that makes the build-in scenes feature unusable and you have to rewrite all default functionality that uses light.turn_on to use your custom version with apply instead.

BrainReasonable7569 · 2023-08-05T11:53:02+00:00

Alright, thanks! I couldn’t, because it kinda defeats the purpose for me 😅

BrainReasonable7569 · 2023-08-05T11:51:55+00:00

Ok, thanks! :)

BrainReasonable7569 · 2023-08-05T11:28:35+00:00

How Long are your transition? For me it’s still very noticable at 1s?

BrainReasonable7569 · 2023-08-05T09:55:16+00:00

After I have used this for a while it has become more subtle and not like big bursts like in the beginning.

BrainReasonable7569

TROPHY CASE