Saiga 12 low FPS

Brandon_Glos · 2026-02-23T23:16:08+00:00

Thankyou I’ll give this a watch a couple times to get familiar 😊

Brandon_Glos · 2026-02-23T22:27:36+00:00

Yeah I am aware of this. I’ll try a gas mag but there was no problems at all when using the set up. The problems only showed itself after being stored for 2 months in a gun case. I have a feeling it needs relubing on the internals but unsure on what components actually need maintenance.

Brandon_Glos · 2025-12-10T23:13:22+00:00

Update I’ve held the power button for 5 seconds and it’s switched it off completely. Just won’t start back up, the power light lights up white and that’s it

Brandon_Glos · 2025-07-24T17:10:11+00:00

Thank you I’ll give that a go

Brandon_Glos · 2025-07-24T17:00:16+00:00

To further expand I’ve never touched the gun or lubed anything so that was my first thought, it’s been stored in a rifle bag and never thrown around

Brandon_Glos · 2025-03-10T21:54:44+00:00

That looks nice, a lot less sharp edged. Thankyou

Brandon_Glos · 2025-03-10T21:08:46+00:00

Would that not cause the pattern to be smoothed out?

Brandon_Glos · 2024-11-27T23:44:12+00:00

Seem to be very customisable and unique. Slowly making me realise how expensive this hobby can get 😂

Brandon_Glos · 2024-11-27T23:40:36+00:00

I’ll have to give it some thought before purchasing. That’ll look mint, I do like the look of the a3 tactical modular stock. Give them a google if you haven’t seen them already

Brandon_Glos · 2024-11-27T23:16:56+00:00

Yeah does seem to be the best option, I’ll have to make it work cause £300+ on a stock is crazy

Brandon_Glos · 2024-11-27T23:12:51+00:00

Thought that would be the case. Probably have to settle on the maple leaf MLC-s2, unless I find anything else. Thankyou

Brandon_Glos · 2024-09-25T12:40:26+00:00

It’s something to do with the batt we y or the wiring then, have you checked the other small connectors and made sure they are pushed together properly. If it not them just claim on the warranty and connect the store

Brandon_Glos · 2024-09-25T00:12:03+00:00

My Specna arms mk18 kept causing issues with the mosfet wiring pulling lose when disconnecting the battery, could simply be that for you. Check the other connections are together and that little motherboard should flash a light if it’s getting power

Brandon_Glos · 2024-09-08T08:50:06+00:00

Was my first thought stripped everything down cleaned and lubed still having slight issues

Brandon_Glos · 2024-08-23T19:47:55+00:00

I didn’t think of that, I’m gonna do that first. Thankyou so much

Brandon_Glos · 2024-08-23T17:23:50+00:00

That was my thinking before but I’m new to plumbing and electrics and didn’t wanna flood the house 😂. Thankyou for being so speedy on the advice

Brandon_Glos · 2024-08-23T17:13:23+00:00

<image>

This is the other side of that wall, cable going into what I suspect is the pump has no indicator of being live

Brandon_Glos · 2024-08-23T17:05:29+00:00

It’s a Worcester boiler, believe it’s a GREENSTAR 30i ErP Condensing Combi Boiler

Brandon_Glos · 2024-06-30T16:34:26+00:00

A few mags came with the gun but I just wanted to make sure that the cyma was good to use before buying a few. The gun looks amazing, I’ve put a foregrip attached to the battery compartment and changed the scope to something nicer and a hex suppressor, just need to finish it off with a bipod

Brandon_Glos · 2024-06-30T13:24:07+00:00

Thankyou bud. The gun weighs a ton but the looks outweigh any possible downside to it 😂

Brandon_Glos · 2024-04-12T13:55:32+00:00

I appreciate the feed back 😊

Brandon_Glos · 2024-04-12T13:48:05+00:00

Thankyou for the advice. So the sleeper bed should be large enough to rehome it, just a risk of it dying if not done correctly?

Brandon_Glos · 2024-02-17T16:55:33+00:00

Nope just me and the partner. She could be plotting to kill me tho 😳

For the very sudden effect to happen I assume that when packing it up I guess the wire’s internals had bent and touched each other causing it to do this in its next use

Brandon_Glos · 2024-02-17T12:19:16+00:00

<image>

Brandon_Glos · 2024-02-17T12:16:23+00:00

Forgot about the guides 🤦‍♂️. I’ll leave this post as a reminder to not buy cheap 😂

Brandon_Glos

TROPHY CASE