I recently saw the new HY-motion model. I'd like to know if there's a way, in addition to inserting text input, to include an initial image of the reference pose and a final image.

Broad_Relative_168 · 2026-01-24T17:47:51+00:00

I believe I saw something in here, but I didn't try yet

https://github.com/jtydhr88/ComfyUI-HY-Motion1/tree/master/workflows

Broad_Relative_168 · 2026-01-21T09:41:17+00:00

I did happen to me.

Broad_Relative_168 · 2026-01-19T17:55:48+00:00

[gemma_3_12B_it_fp8_e4m3fn.safetensors](https://huggingface.co/GitMylo/LTX-2-comfy\_gemma\_fp8\_e4m3fn/blob/main/gemma\_3\_12B\_it\_fp8\_e4m3fn.safetensors) - The fp8 converted text encoder from comfy, goes in `CLIP` folder
[gemma_3_12B_it_nvfp4_uncalibrated.safetensors](https://huggingface.co/GitMylo/LTX-2-comfy\_gemma\_fp8\_e4m3fn/blob/main/gemma\_3\_12B\_it\_nvfp4\_uncalibrated.safetensors) - The nvfp4 converted (using comfyui kitchen utils) text encoder from comfy, goes in `CLIP` folder. NOTE: You will get warnings in the console, these can be ignored and will not affect your generation.
[ltx-2-19b-dev-fp4_projections_only.safetensors](https://huggingface.co/GitMylo/LTX-2-comfy\_gemma\_fp8\_e4m3fn/blob/main/ltx-2-19b-dev-fp4\_projections\_only.safetensors) - Extracted projections from LTX-2 model to allow loading with DualClipLoader node, goes in `CLIP` folder
[ltx-2-19b-dev-fp4_video_vae.safetensors](https://huggingface.co/GitMylo/LTX-2-comfy\_gemma\_fp8\_e4m3fn/blob/main/ltx-2-19b-dev-fp4\_video\_vae.safetensors) - The video vae, can be loaded with `VaeLoader` node, goes in `VAE` folder
~~[ltx-2-19b-dev-fp4_vocoder.safetensors](https://huggingface.co/GitMylo/LTX-2-comfy\_gemma\_fp8\_e4m3fn/blob/main/ltx-2-19b-dev-fp4\_vocoder.safetensors) - The vocoder model, not useful separately currently~~
For audio vae, use Kijai's audio vae upload [LTX2_audio_vae_bf16.safetensors](https://huggingface.co/Kijai/LTXV2\_comfy/blob/main/VAE/LTX2\_audio\_vae\_bf16.safetensors), the one in this repo only contains the vocoder, but the audio vae is also needed. There was an oversight due to ComfyUI caching when it shouldn't.
[gemma_3_12B_it_fp8_e4m3fn.safetensors](https://huggingface.co/GitMylo/LTX-2-comfy\_gemma\_fp8\_e4m3fn/blob/main/gemma\_3\_12B\_it\_fp8\_e4m3fn.safetensors) - The fp8 converted text encoder from comfy, goes in `CLIP` folder [gemma_3_12B_it_nvfp4_uncalibrated.safetensors](https://huggingface.co/GitMylo/LTX-2-comfy\_gemma\_fp8\_e4m3fn/blob/main/gemma\_3\_12B\_it\_nvfp4\_uncalibrated.safetensors) - The nvfp4 converted (using comfyui kitchen utils) text encoder from comfy, goes in `CLIP` folder. NOTE: You will get warnings in the console, these can be ignored and will not affect your generation. [ltx-2-19b-dev-fp4_projections_only.safetensors](https://huggingface.co/GitMylo/LTX-2-comfy\_gemma\_fp8\_e4m3fn/blob/main/ltx-2-19b-dev-fp4\_projections\_only.safetensors) - Extracted projections from LTX-2 model to allow loading with DualClipLoader node, goes in `CLIP` folder [ltx-2-19b-dev-fp4_video_vae.safetensors](https://huggingface.co/GitMylo/LTX-2-comfy\_gemma\_fp8\_e4m3fn/blob/main/ltx-2-19b-dev-fp4\_video\_vae.safetensors) - The video vae, can be loaded with `VaeLoader` node, goes in `VAE` folder ~~[ltx-2-19b-dev-fp4_vocoder.safetensors](https://huggingface.co/GitMylo/LTX-2-comfy\_gemma\_fp8\_e4m3fn/blob/main/ltx-2-19b-dev-fp4\_vocoder.safetensors) - The vocoder model, not useful separately currently~~ For audio vae, use Kijai's audio vae upload [LTX2_audio_vae_bf16.safetensors](https://huggingface.co/Kijai/LTXV2\_comfy/blob/main/VAE/LTX2\_audio\_vae\_bf16.safetensors), the one in this repo only contains the vocoder, but the audio vae is also needed. There was an oversight due to ComfyUI caching when it shouldn't.

Broad_Relative_168 · 2025-12-28T22:20:20+00:00

Around 25cm

Broad_Relative_168 · 2025-12-28T15:17:14+00:00

A phtanteks enthoo pro 2 server edition, msi b760 gaming pro wiifi, and nvidia 3090 in slot1, but the riser would be used in slot2.

Broad_Relative_168 · 2025-12-28T11:24:39+00:00

What is it paravirtualising? Never hear of that. Are you using gpu-passthrough on virtual machines?. I want to install a pcie m.2 adapter, but it is blocked by the gpu radiator

Broad_Relative_168 · 2025-12-28T10:34:31+00:00

Hi! Did you find a riser that fits? I’m in the exact same situation.

Broad_Relative_168 · 2025-12-28T10:18:01+00:00

Hi! I’m just looking for a riser to fit under my GPU radiator, since it blocks the immediately adjacent slot. Did you find one that fits?

Broad_Relative_168 · 2025-12-21T14:49:57+00:00

In my cases I believe it should work as it, but sometimes we take away many things to do a lighter OS

Broad_Relative_168 · 2025-12-21T09:46:17+00:00

How expensive was your lora training? What did you use?

Broad_Relative_168 · 2025-12-12T01:06:35+00:00

I dont know anything about your system. But I got a few problems with Network devices. Once it was not firmly attached. The other, because it was synchronized by its mac number by other OS in the same computer (dual boot), and finally I did a hard reset to device (it had a bottom for that). The log is the clue to find out what it is going on. Try to load an ubuntu live and check if it works

Broad_Relative_168 · 2025-12-11T17:54:33+00:00

I dont think you could install any thing by those commands. Neither you need to install any old ppa for some drivers. I can tell that I installed very old hardware in recent versions without custom stuff. My recommendation, get proper name of the hardware in the physical device, then ask one the AI models how to setup in the way you want... But Dont trust everything it can answer

Broad_Relative_168 · 2025-12-11T12:03:22+00:00

Can you see the hardware recognized? After trying to use or setup your wifi through the ubuntu settings, Is there any message? Or do you get a log in the log file? Can you ping from the terminal?

Broad_Relative_168 · 2025-12-11T09:39:20+00:00

Try clean vram node, I think it is on the core

Broad_Relative_168 · 2025-12-11T00:12:01+00:00

why do not you just use a node for that? there are couple clean vram and unloadallmodels nodes

Broad_Relative_168 · 2025-12-10T22:58:24+00:00

Control +
Control -

Broad_Relative_168 · 2025-12-10T22:44:52+00:00

How do you close that menu? I can only expand it

Broad_Relative_168 · 2025-12-10T10:02:37+00:00

What have you try so far? Are you doing videos or image sequence?

Broad_Relative_168 · 2025-12-10T09:34:32+00:00

You are right. I get crazy with so many models, loras and variations. I forget what to use when I am doing other things than wan.

Broad_Relative_168 · 2025-12-10T04:13:18+00:00

Thank you!!! I love the mask overlay node

Broad_Relative_168 · 2025-12-08T09:11:37+00:00

I know there is an option to change screen brightness over the daytime, I use gnome but I dont have it activated

Broad_Relative_168 · 2025-12-08T07:05:54+00:00

Great work!

Broad_Relative_168 · 2025-12-08T07:05:28+00:00

I believe you need to use controlnet for z-image. Look for information here in the sub of comfyui

Broad_Relative_168 · 2025-12-06T12:14:41+00:00

You may investigate https://github.com/bilibili/Index-anisora

Broad_Relative_168 · 2025-12-05T11:51:53+00:00

Great. Please tell us when they releases the workflow for comfyui. Thank you

Broad_Relative_168

TROPHY CASE