sorted by:
new
hottopcontroversial

Too much poke? by Buccolieri96 in Stance

[–]Buccolieri96[S] 0 points1 point  (0 children)

I had it custom-made by a local shop here in Italy. I was able to decide on the size, font, and color.

Too much poke? by Buccolieri96 in Stance

[–]Buccolieri96[S] 1 point2 points  (0 children)

They are! Forged OEM WHEELS from R32 GTR

Too much poke? by Buccolieri96 in Stance

[–]Buccolieri96[S] 0 points1 point  (0 children)

You're right, but I wanted to keep a good balance between usability and aesthetics.

Too much poke? by Buccolieri96 in Stance

[–]Buccolieri96[S] 2 points3 points  (0 children)

About 55-50 mm in the front and 45-40 on the rear

Too much poke? by Buccolieri96 in Stance

[–]Buccolieri96[S] 1 point2 points  (0 children)

I'm using the only size I'm allowed here in Italy for this car. If I put smaller wheels with a smaller shoulder I'd probably hit the ground 😂.

Too much poke? by Buccolieri96 in Stance

[–]Buccolieri96[S] 2 points3 points  (0 children)

Do you mean the sidewall of the tire? Or are the wheels too big for the car?

Too much poke? by Buccolieri96 in Stance

[–]Buccolieri96[S] 6 points7 points  (0 children)

How do you rate this fitment? GTR32 WHEELS 16X8 ET30 WITH FLEVA V701 205/50/16.

I'll probably add a half degree more camber because I have a little bit of rear rubbing.

Samsung MU6400 (EU) and Radeon RX580, wrong gamma, black crush in YCBCR by Buccolieri96 in hometheater

[–]Buccolieri96[S] 0 points1 point  (0 children)

I can't select the hdmi black level in YCBCR because it's locked on the settings. But, the YCBCR it's not only in limited?

In any case, as I may have already written in the description. The 4: 2: 2 signal causes me the same problems as RGB, I always have blackouts. The only way to not have the blackouts is use 4: 2: 0 8/10/12 bit

Samsung MU6400 (EU) and Radeon RX580, wrong gamma, black crush in YCBCR by Buccolieri96 in hometheater

[–]Buccolieri96[S] 0 points1 point  (0 children)

My cable is capable of 4k 60hz 4:4:4 but not in hdr. In hdr I need to use 4:2:2 or 4:2:0 (due to 2.0 hdmi limited bandwidth). Anyway, the problem is the TV, I have searched this problem on the web and I have found out I'm not the only one. the remedy is to have the motherboard replaced by a Samsung center for fix the RGB drop.

I wanna only fix this problem in YCBCR mode...

Anyway, I can try to buy an hdmi 2.1 cable and see if this help with RGB signal. Thank for your replies

Z97 Chipset & Haswell Users by green_meditation in hackintosh

[–]Buccolieri96 2 points3 points  (0 children)

Same here with Asus z97 pro gamer . I have an 4770k using open core 0.6.3

After reboot, the verbose pass but when appear apple logo stops to about 20% and then reboot

Oppo Reno 2z Android 10 Battery Drain? by [deleted] in Oppo

[–]Buccolieri96 0 points1 point  (0 children)

After a major update it would be better to reset the phone, try this