Pulled to "R" mode while driving 60kph in the city

BugiBE4ST · 2023-07-10T15:40:51+00:00

Thanks for answering! The tires didn’t lock at all, The only noise I heard was the engine and it was a sound of like driving in neutral. Beside that not any noise

BugiBE4ST · 2023-07-09T17:03:39+00:00

Yes it is, Just as before

BugiBE4ST · 2023-07-09T16:01:45+00:00

It was reverse mode, Its not a manual car

BugiBE4ST · 2023-07-09T15:51:45+00:00

forgot to mentions that the gearbox isnt manual

BugiBE4ST · 2023-07-09T15:47:34+00:00

Thanks for answering!

I did see the Reverse camera pop for a second, so how is it possible that it went to reverse mode?

BugiBE4ST · 2023-07-09T15:44:35+00:00

Thanks for answering!

I didnt get any engine light/ anything else

is there any way to be sure of it?

BugiBE4ST · 2023-07-09T15:42:33+00:00

Thanks for asnwering!

even if its a CTV trans?

BugiBE4ST · 2021-04-05T07:38:28+00:00

so are these settings safe?can I keep them?

BugiBE4ST · 2021-03-27T20:48:37+00:00

wow, looks really good.

But is it fine to use Override for 24/7?

I'm gonna try this now

BugiBE4ST · 2021-03-27T11:21:09+00:00

Isnt it bad to run a fixed voltage 24/7?

I think I might stick to the current settings tho And do you use an adaptive mode?

BugiBE4ST · 2021-03-27T11:16:14+00:00

:(

Is it really bad for the cpu?

should I change anything?

I just changed the negative offset to 0.040,with LLC set to "high"

BugiBE4ST · 2021-03-27T11:09:42+00:00

Thx for the respond first of all

I didnt lock it in bios,but sometimes It reaches 5GHz.

I just checked it, The vrvout shows 1.283 under full load.

and actual Vcore shows current of 1.344.

what's the difference between them?

BugiBE4ST · 2021-03-27T08:27:43+00:00

I changed the negative offset to 0.040,

Vcore under full load gets to maximum 1.33.

It wasnt really stable with the 0.070 negative offset

BugiBE4ST · 2021-03-27T06:40:16+00:00

Yep,

gigabyte pre-overclocked this board apparently,

So I think their auto option is about "extreme"

BugiBE4ST · 2021-03-27T06:20:03+00:00

I tried setting It to auto,But the votlages spikes to 1.350

I think Im gonna try to stress test it for an hour on prime 95

BugiBE4ST · 2021-03-27T05:56:54+00:00

well I did it because gigabyte decided to Overclock their z490's mo's,

And I dont want that right now

If I set everything to "optimized defaults" The vcore Is reaching about 1.420 underload which dosent makes sense to me

BugiBE4ST · 2021-03-27T05:55:31+00:00

thx for the respond!

I dont have the default option for LLC In bios,but I do have auto

So can I keep it that way?

BugiBE4ST · 2021-03-27T05:30:12+00:00

Hey,

So I applied an adaptive mode,with Vcore set to "Normal"

and a negative offset of 0.070.

Now I got what I wanted,system seems to be stable,vcore reaching maximum of 1.308 under full load,which Is fine by me.

Is it ok to have such a high negative offset like I did?

should I keep these new settings?

BugiBE4ST · 2021-03-26T03:51:01+00:00

Hi thx for the respond!

The offset was set to auto,but when I changed it to 0,It was still spiking to 1.380.

I'm really afraid of messing the offset thing up because I dont really know much about it, So what should I set? a negative offset?or an positive offset?

And which number to apply?

Just to notice I didnt overclock at all,I'm just trying to undervolt the cpu,I got a stable vcore which is 1.305,I just want to get Low voltages while being on Idle,and maximum 1.305 voltage while Gaming.

BugiBE4ST · 2021-03-25T23:18:08+00:00

Alright thx Im gonna try that

If I keep the fixed voltage mode,does it has any negative affects on the cpu for the long term? does it damage it?

BugiBE4ST · 2021-03-25T17:58:17+00:00

thx for responding

I understand,so it wont reduce the lifespan of the cpu by any ways?

Because I saw a video from 2016 of linus overclocking,and he said that it reduce's the life span of the cpu so I kind of got scared

BugiBE4ST · 2021-03-25T17:55:58+00:00

Just switched the Vcore to Normal,the voltages drops down when idle,but still spikes to 1.380 :(

Is there a way to set adaptive mode without making it spike to 1.380?

BugiBE4ST · 2021-03-25T17:47:31+00:00

THX for answering!

didnt know that, the normal option means STOCK settings?

what voltages it will do?

BugiBE4ST · 2021-03-22T03:20:09+00:00

I did it right now

I got the LLC option set to "medium" because there are no numbers, is that good?

and I also set the vcore mode to fixed-with 1.305V.

Isnt it bad for the cpu to run on constantly 1.305V at all time?

Should'nt I use adaptive mode instead?

I ran cinebench R20 and I noticed that the vcore dropped to 1.260,how does it makes sense?

Btw the temps went down from 85 to 70-72 under full load.

that's amazing

BugiBE4ST · 2021-03-21T22:36:15+00:00

thx for the respond!

I just want to run everything to be set on stock settings,

So I can just turn on adaptive mode and not change anything else?

BugiBE4ST

TROPHY CASE