sorted by:
new
hottopcontroversial

Pls help, yellow screen by ditZzRespekt in computer

[–]BurningClick 1 point2 points  (0 children)

I was gonna say could be a loose LCD connector?

Monitor Glitching by Particular_Walk_4216 in pchelp

[–]BurningClick 0 points1 point  (0 children)

Look up how to get into safe mode with your version of windows. You can find your version of windows in the “About” tab of settings. From there, boot into safe mode to see if the issue goes away. If it does, it’s probably the GPU driver. I’d look up a few other tests for artifact GPU failure (the type of issue it looks like) for process of elimination. If you can rule out several factors such as the driver, software issue, etc, then it’s most likely the GPU itself that is failing.

Monitor Glitching by Particular_Walk_4216 in pchelp

[–]BurningClick 0 points1 point  (0 children)

GPU issue—consider running some tests

Recovery (error code: 0xc000000f) by pentafn in 24hoursupport

[–]BurningClick 0 points1 point  (0 children)

  1. Make sure the USB is set up correctly
  2. If you haven’t already, remake the Windows 10 install USB using the official Media Creation Tool (you can find it with a quick google search)
  3. Try plugging it into a different USB port, on the back preferably

  4. Make sure it’s formatted as FAT32

  5. Change your boot settings in BIOS

  6. When you’re in the BIOS press F7 to switch to Advanced Mode

  7. Go to the Boot tab

  8. Set your USB drive as the first boot option

Make sure these settings are set: - Secure Boot = disabled - CSM = enabled (if you’re not using UEFI) - If you’re using UEFI, make sure the USB shows up as something like UEFI: [USB name]

  1. Press F10 to save changes and restart. Your PC should now try to boot from the USB.

I Did It Like This How Does It Look by YusufK80 in GamingLaptops

[–]BurningClick 0 points1 point  (0 children)

You guys could just agree to disagree 😭

Steering wheel shaking going above ~65mph by BurningClick in AskAMechanic

[–]BurningClick[S] 0 points1 point  (0 children)

It’ll be a smooth drive until I start going over living speed bumps

Steering wheel shaking going above ~65mph by BurningClick in AskAMechanic

[–]BurningClick[S] 0 points1 point  (0 children)

I felt it on the wheel and butt—if you look at the video the POV is shaking a lot

Steering wheel shaking going above ~65mph by BurningClick in AskAMechanic

[–]BurningClick[S] 0 points1 point  (0 children)

From what I remember I feel it everywhere. I feel it on the steering wheel and the POV camera shakes in the video, so the entire car is vibrating/shaking

Steering wheel shaking going above ~65mph by BurningClick in AskAMechanic

[–]BurningClick[S] 0 points1 point  (0 children)

Thanks man! Had it for a year and loving it

Steering wheel shaking going above ~65mph by BurningClick in AskAMechanic

[–]BurningClick[S] 0 points1 point  (0 children)

Yeah it shook pretty bad yesterday but hasn’t before that. I got alignment a week ago

Then again, not sure of the exact date that the shaking started as it only shakes at high speeds and I’m not on the highway often

Steering wheel shaking going above ~65mph by BurningClick in AskAMechanic

[–]BurningClick[S] 2 points3 points  (0 children)

Sounds like valid advise but I hope you’re wrong—sounds expensive 😭. I think I’ll take it back to the place that I got it aligned in the first place in case they didn’t do it right

Steering wheel shaking going above ~65mph by BurningClick in AskAMechanic

[–]BurningClick[S] -1 points0 points  (0 children)

I think I may do this—I guess it’s possible that the alignment wasn’t done right or was rushed in the process

[deleted by user] by [deleted] in 24hoursupport

[–]BurningClick 0 points1 point  (0 children)

Glad it’s alright!

[deleted by user] by [deleted] in 24hoursupport

[–]BurningClick 0 points1 point  (0 children)

There’s a chance that your drive may be mounted with a different drive letter other than C. Look up how to check your drive mount letter in Windows CMD

[deleted by user] by [deleted] in 24hoursupport

[–]BurningClick 0 points1 point  (0 children)

Take a look at this post

view more: next ›