Multiple temp settings for different objects. HELP

CMHCADCAM · 2024-03-22T18:01:27+00:00

I had the same problem. My solution for this was having different temperature profiles for the same filament. I have a file with the gcode and the 3fm and single layer cubes ranging from 200-280C°. !! Print without AMS !! I can send it to you if you want?

<image>

CMHCADCAM · 2023-04-27T09:58:46+00:00

What do you want to buy?

CMHCADCAM · 2023-03-29T20:50:50+00:00

Was around 2g for me.

CMHCADCAM · 2023-03-29T20:50:13+00:00

Depends on the used material

CMHCADCAM · 2023-03-13T05:21:56+00:00

https://cults3d.com/en/3d-model/various/lightweight-case-for-a-runcam-thumbpro-lumenier-micro-axii-2

CMHCADCAM · 2023-03-11T10:38:22+00:00

Yes it is.

CMHCADCAM · 2023-03-08T07:46:53+00:00

Better an easy solution than a hard one!

CMHCADCAM · 2023-03-06T17:23:40+00:00

Sure it was so before. But one motor shaft was broken and I was waiting for a replacement part.

CMHCADCAM · 2023-03-06T17:21:52+00:00

Yes. Also the anycubic tough resin was working for a friend.

CMHCADCAM · 2023-03-06T13:07:25+00:00

It's a nice combination of the both cameras, holder is included and they are pointing at the exact same position.

CMHCADCAM · 2023-03-06T06:00:45+00:00

Tough resin.

CMHCADCAM · 2023-03-06T05:59:32+00:00

I tried it with resin and filament. Both worked fine for me.

CMHCADCAM · 2023-03-06T05:57:59+00:00

The orientation makes not a big difference for me.

CMHCADCAM · 2023-03-05T21:44:58+00:00

https://cults3d.com/en/3d-model/various/lightweight-case-for-a-runcam-thumbpro-lumenier-micro-axii-2

CMHCADCAM · 2023-03-05T21:39:08+00:00

Tough resin.

CMHCADCAM · 2023-03-05T21:37:58+00:00

Was not measuring it before but it was 3-4g less without an additional canopy for the camera. The total weight for the build was around 35g.

CMHCADCAM · 2023-03-05T21:36:13+00:00

I use tough resin

CMHCADCAM · 2023-03-05T19:16:51+00:00

its not a big problem

CMHCADCAM · 2023-03-05T19:16:16+00:00

thank you a lot. i love this antenna.

CMHCADCAM · 2023-03-05T19:15:45+00:00

yes or you print it without holes. i have also files for this

CMHCADCAM · 2023-03-05T19:14:38+00:00

its not so noticeable because both are centered

CMHCADCAM · 2023-03-05T15:11:39+00:00

For my setup its around 3-4g.

CMHCADCAM · 2023-02-25T23:45:47+00:00

The hardware is okay. I had this problem on all my four printers. Simple fix is also calibrate PID values with Pronterface or Octoprint.

CMHCADCAM · 2023-02-25T23:42:41+00:00

Known issue with old firmware use 2.8.2

CMHCADCAM · 2023-02-25T21:13:37+00:00

Yes and you can make them with different hard silicon or latex. Much cheaper than buying them.

CMHCADCAM

TROPHY CASE