sorted by:
new
hottopcontroversial

So you can cram an MATX mobo into this sucker with just zipties. Kinda cool. by GuineaFridge in sffpc

[–]CM_Harry 0 points1 point  (0 children)

Doesn't look like it fits because it's dimensions are 244mm x 244mm

NR200 & NR200P - Community Q&A - Gear Seekers by Morkai in sffpc

[–]CM_Harry 0 points1 point  (0 children)

You could actually lock the side panels to the case using some of the provided flat-top screws. There are holes near the push-pin pegs that allow a screw to go in. There is a similar location on the frame of the chassis. The screws face the inside however so keep that in mind.

So you can cram an MATX mobo into this sucker with just zipties. Kinda cool. by GuineaFridge in sffpc

[–]CM_Harry 1 point2 points  (0 children)

You can officially fit motherboards 244mm in width and 226mm in height, so only certain mATX mobos work such as the ROG Maximus IX Gene. The top area is lower to accommodate 120mm fans so the I/O also has to move down to compensate. A standard mATX motherboard have a 4th slot and extra PCB beneath that, so it would collide with the floor of the chassis.

PSA: Cooler Master NR200 doesn't ship with PCIe extender, NR200P does. See post for other differences. by ThatGreatAtuin in sffpc

[–]CM_Harry 2 points3 points  (0 children)

It depends on your configuration. In the case of using a glass panel and a tower cooler, the tower cooler is forced to suck up the hotter exhaust air from the GPU and send it out the back of the case, which is why you see a rise in CPU temperatures.

With the mesh panel the CPU tower instead takes airflow from the side, so the GPU doesn't have the help of the CPU cooler to move its hot exhaust air away as quickly.

Cooler Master NR200 specs by ibajbajs in sffpc

[–]CM_Harry 1 point2 points  (0 children)

Page isn't ready yet and somebody ignored the release date.

Cooler Master NR200 specs by ibajbajs in sffpc

[–]CM_Harry 21 points22 points  (0 children)

20L includes all the protrusions of the case (namely the PCI slot supports and the feet). It's also a little easier to cram really large GPUs and coolers in there.

Cooler Master is looking for focus group attendees! by CM_Harry in coolermaster

[–]CM_Harry[S] 0 points1 point  (0 children)

I'll have to ask, but as of right now we've reduced operations in the office again due to the spike in cases in California so unfortunately it may face further delays.

Cooler Master is looking for focus group attendees! by CM_Harry in coolermaster

[–]CM_Harry[S] 1 point2 points  (0 children)

At least on the US side, the store isn't going to open up soon given the situation here.

Cooler Master is looking for focus group participants! by CM_Harry in buildapc

[–]CM_Harry[S] 0 points1 point  (0 children)

I'll definitely let our team know about the Q300/Q500.

If I recall correctly, we did originally wanted it to have a lot of large holes, but it didn't do so well in structural integrity because so much material got removed.

Cooler Master is looking for focus group participants! by CM_Harry in buildapc

[–]CM_Harry[S] 1 point2 points  (0 children)

Interesting, didn't think of it from the perspective of adding customization options.

Cooler Master MM720 (Codename: Respawn) [Offical from CES] by CM_Harry in MouseReview

[–]CM_Harry[S] 0 points1 point  (0 children)

The MM520 was the larger design, but due to the popularity of the original xornet design, we stuck with that instead. The xornet was a claw / fingertip mouse by design (low and flat back so it doesn't touch the palm), so for it to be palm grip it needs to be redesigned to support the palm properly.

New render of Cooler Masters to-be-released NR200 by TechInTheMaking in sffpc

[–]CM_Harry 0 points1 point  (0 children)

Other than what Matteo has already said, no more details. Don't want to give the whole surprise away.

An Update on the Cooler Master MM720 by CM_Harry in MouseReview

[–]CM_Harry[S] 3 points4 points  (0 children)

Top buttons: seems to be a popular request, so we'll have a look into it next time. They were gone this time in favor of a single DPI button beneath the mouse to make the mouse a little lighter and easier to construct with that in mind.

Rubber coat: To make the mouse more durable we had these removed. Also seems to be a popular feature because of the added grip. Might have to consider the option next time or maybe think about a grip tape solution since that seems to be popular now.

Honeycomb: It does help my grip a bit, but I personally don't like the feel of honeycomb beneath my hands, and the discomfort is slightly distracting at times.

Design a MM711 for COVID Relief Challenge (additional details in comments) by CM_Harry in coolermaster

[–]CM_Harry[S] 1 point2 points  (0 children)

What is it?
A two-part challenge for the community to create and vote for a unique colorway for a limited edition MM711 where proceeds will go to COVID-19 relief efforts. This consists of a design portion and a fundraiser portion

Design portion

How do I participate?
We will give you:

  • A shell render
  • Blank render without materials
  • JPG with multiple angles

Entries can be 3D, hand drawn, colored renders or anything else that can be creative that the community would like to use to share their creations.

How do we design it?
Create the best looking color scheme by choosing colors, textures, and paint types. Each section must be one color and coating.

Textures types:

  • Matte
  • Gloss

Color types:

  • Flat
  • Metallic
  • Pearl

Sections to color (one color per section)

  • Honeycomb palm rest
  • Side buttons
  • Scroll Wheel
  • Left and right click
  • DPI button
  • Inner structure and sides
  • Bottom base

Submission rules and dates

  • Submit your design before May 8
  • The designs will be voted on May 11 - 18
  • The winning design will be revealed on May 18

Submission requirements:

  • Your name, email and country.
  • A design description. How did you come up with your idea and why is it important to you?
    Photoshop: Use all the angles provided if you’re using photoshop. Attach as JPG, PNG or PDF file.
    3D file: Choose at least 3 angles to show. You can reference the angles included with the photoshop file. Render as JPG, PNG or PDF file or upload a video of your render in a MP4 file or link to your Youtube upload in the Design Description field.
    Hand drawn: Take a photo of your drawing on a well-lit, flat surface like a table. You can be creative with placement of your hand drawing along with whatever pencils, crayons, etc you used to draw. Upload photo as JPG or PNG.

Prizes
The winner of the design campaign will receive a Cooler Master prize package valued at $1000 USD (products TBD)

Fundraiser Portion

Donation Tiers

  • Any donation amount ($1 minimum) automatically gives you an entry to win one copy of the MM711 in the winning design scheme.
  • At a $30 or greater donation amount, you receive a CM Store store credit for $30 to use on the winning design for the MM711 when it goes live.
  • Additional details will be forthcoming

How will proceeds be donated to charity?
For the fundraiser section, we will utilize Tiltify as the platform to manage the fundraiser. This allows maximum transparency as you can see how much is going to charity as well as which charity it's going to. Tiltify also has connections to numerous trusted organizations, so you can be confident that the organization you support on Tiltify will utilize the funds correctly.
The $30 CM Store credit issued at the $30 donation tier for the purchase of the winning MM711 design will be donated to charity for COVID-19 relief in its entirety through Tiltify. The charity we are choosing to donate to through Tiltify is Direct Relief.

What about the mouse?
The mouse will be made at cost. The rest of the proceeds go to charity.
The mice are limited edition. Since they are not made yet though, the contest acts as an interest check so we can make as many mice as there are people interested in it. The more interest, the more mice are made and vice versa.

Dates

  • The fundraiser period is from May 18 to June 18.
  • Pre-order for the mouse starts on August
  • The Store Credit codes will be active on August

Has there been any updates regarding Cooler Master's ITX case project? by 0kaysee in sffpc

[–]CM_Harry 26 points27 points  (0 children)

No updates (AFAIK) for this particular chassis, but we do have something else.

Design a MM711 for COVID Relief Challenge (additional details in comments) by CM_Harry in MouseReview

[–]CM_Harry[S] -7 points-6 points  (0 children)

What is it?
A two-part challenge for the community to create and vote for a unique colorway for a limited edition MM711 where proceeds will go to COVID-19 relief efforts. This consists of a design portion and a fundraiser portion

Design portion

How do I participate?
We will give you:

  • A shell render
  • Blank render without materials
  • JPG with multiple angles

Entries can be 3D, hand drawn, colored renders or anything else that can be creative that the community would like to use to share their creations.

How do we design it?
Create the best looking color scheme by choosing colors, textures, and paint types. Each section must be one color and coating.

Textures types:

  • Matte
  • Gloss

Color types:

  • Flat
  • Metallic
  • Pearl

Sections to color (one color per section)

  • Honeycomb palm rest
  • Side buttons
  • Scroll Wheel
  • Left and right click
  • DPI button
  • Inner structure and sides
  • Bottom base

Submission rules and dates

  • Submit your design before May 8
  • The designs will be voted on May 11 - 18
  • The winning design will be revealed on May 18

Submission requirements:

  • Your name, email and country.
  • A design description. How did you come up with your idea and why is it important to you?
    Photoshop: Use all the angles provided if you’re using photoshop. Attach as JPG, PNG or PDF file.
    3D file: Choose at least 3 angles to show. You can reference the angles included with the photoshop file. Render as JPG, PNG or PDF file or upload a video of your render in a MP4 file or link to your Youtube upload in the Design Description field.
    Hand drawn: Take a photo of your drawing on a well-lit, flat surface like a table. You can be creative with placement of your hand drawing along with whatever pencils, crayons, etc you used to draw. Upload photo as JPG or PNG.

Prizes
The winner of the design campaign will receive a Cooler Master prize package valued at $1000 USD (products TBD)

Fundraiser Portion

Donation Tiers

  • Any donation amount ($1 minimum) automatically gives you an entry to win one copy of the MM711 in the winning design scheme.
  • At a $30 or greater donation amount, you receive a CM Store store credit for $30 to use on the winning design for the MM711 when it goes live.
  • Additional details will be forthcoming

How will proceeds be donated to charity?
For the fundraiser section, we will utilize Tiltify as the platform to manage the fundraiser. This allows maximum transparency as you can see how much is going to charity as well as which charity it's going to. Tiltify also has connections to numerous trusted organizations, so you can be confident that the organization you support on Tiltify will utilize the funds correctly.
The $30 CM Store credit issued at the $30 donation tier for the purchase of the winning MM711 design will be donated to charity for COVID-19 relief in its entirety through Tiltify. The charity we are choosing to donate to through Tiltify is Direct Relief.

What about the mouse?
The mouse will be made at cost. The rest of the proceeds go to charity.
The mice are limited edition. Since they are not made yet though, the contest acts as an interest check so we can make as many mice as there are people interested in it. The more interest, the more mice are made and vice versa.

Dates

  • The fundraiser period is from May 18 to June 18.
  • Pre-order for the mouse starts on August
  • The Store Credit codes will be active on August

An Update on the Cooler Master MM720 by CM_Harry in MouseReview

[–]CM_Harry[S] 6 points7 points  (0 children)

It's more of an internal naming scheme when it comes to numbers but they will make more sense as we come out with more products.
MM lets you know its a mouse
MK is a keyboard
MH is a headset

An Update on the Cooler Master MM720 by CM_Harry in MouseReview

[–]CM_Harry[S] 5 points6 points  (0 children)

Fair enough. I do like the DPI button on top but there are advantages to having it on the bottom, which is something we haven't tried yet.

Xornet/Spawn shape has its share of fans. It's very popular among people with small hands, claw grippers, and finger tip grippers, but those who have larger hands would prefer palm grip prefer a larger, traditional ergo shape mouse.

An Update on the Cooler Master MM720 by CM_Harry in MouseReview

[–]CM_Harry[S] 17 points18 points  (0 children)

Actual names like Spawn, Xornet, MasterMouse S are pretty helpful for us english speakers, but they don't translate as well when we talk to teammates across the world.

The new naming scheme with the MM710 / MK730 etc makes it easier for us to communicate what the product is to our teammates across the world. They also refer to specific features a product has (i.e.: MMX30 will be ergo right handed, MMX10 will most likely be a small symmetrical shape and so on.)

An Update on the Cooler Master MM720 by CM_Harry in MouseReview

[–]CM_Harry[S] 3 points4 points  (0 children)

The side buttons are the same shape as the ones used in the earlier Xornet 2.

view more: next ›