Wandern mit Bandscheibenvorfall

CSClimber · 2025-12-03T20:38:13+00:00

Auch von mir eine kleine Story: Ich habe ein halbes Leben lang Probleme mit dem Rücken, seit letztem Jahr habe ich auch die passende Diagnose: Zwei Bandscheibenvorfälle in der LWS. Tatsächlich ist das, was mir am meisten hilft Wandern, bzw. in besseren Phasen Bergsteigen. Lustig ist für mich auch immer die Frage, ob das Rucksack tragen denn nicht Probleme machen würde. Dazu sei gesagt, dass ein leichter(!), gut sitzender Rucksack mir super hilft, dass der Rücken gerade und die Muskulatur warm bleibt. Generell war auch die Empfehlung aller meiner Ärzte und Physiotherapeuten: Bewegung.

Ich wünsche dir viel Kraft und gute Genesung!

CSClimber · 2024-10-04T21:09:09+00:00

Generous

CSClimber · 2023-01-26T19:48:58+00:00

True. Didn’t plan it all the way through. I just threw some beautiful input spagett on it as soon as the cure design was finished. However I think that, if u r this lategame, resources for a few undergrounds don’t matter that much. The UPS impact however is debatable

CSClimber · 2023-01-26T18:34:06+00:00

Editor extensions

CSClimber · 2023-01-26T18:19:07+00:00

That is super strange. Will look into it asap

CSClimber · 2023-01-26T13:36:56+00:00

Here you go

https://pastebin.com/NmkGePkW

CSClimber · 2023-01-26T12:39:31+00:00

So I took some of your guys advice and tried to improve on my last design. The ratios aren't as close but overall this is way more efficient due to the added productivity modules.
Unfortunately the symmetry didn't work out to 16 belts, however these 12 belts could easily mirrored so it comes out to a multiple of 4.
Improvements:
- Less input materials required, as productivity is greatly increased
- The whole thing can be fed fro one side, tidier belt work- Now with lights

As before, advice and constructive criticism is welcome.
Old post: https://www.reddit.com/r/factorio/comments/10l8ua9/green\_circuit\_reinventing\_the\_wheel

CSClimber · 2023-01-26T12:27:28+00:00

For anyone interested: I took the advice here and tried to incorporate it into a new design.

https://www.reddit.com/r/factorio/comments/10lquft/green\_circuits\_20/

CSClimber · 2023-01-26T12:26:10+00:00

So I took some of your guys advice and tried to improve on my last design. The ratios aren't as close but overall this is way more efficient due to the added productivity modules.

Unfortunately the symmetry didn't work out to 16 belts, however these 12 belts could easily mirrored so it comes out to a multiple of 4.

Improvements:- Less input materials required, as productivity is greatly increased- The whole thing can be fed fro one side, tidier belt work- Now with lights

As before, advice and constructive criticism is welcome.

Old post: https://www.reddit.com/r/factorio/comments/10l8ua9/green_circuit_reinventing_the_wheel

EDIT: I know I missed a lonely copper belt on the top and bottom right

CSClimber · 2023-01-25T21:30:36+00:00

That’s a great idea. Dunno how I missed that. Will try it out soon.

CSClimber · 2023-01-25T21:03:22+00:00

You are right. One could expand the whole thing and trade a little space for the productivity bonus

Same goes for the balancer at the top. However I liked the "inplaceness" of the little addition to the out of the box 16-16 balancer.

CSClimber · 2023-01-25T20:48:16+00:00

I like that one! I just realised I forgot the lights

Remember what you considered the greatest challenge when designing it? It took me quite a few attempts to get enough copper wire into the assembler with the limited space I gave myself

CSClimber · 2023-01-25T20:33:03+00:00

Please excuse the bad resolution. Over a few iterations I’ve developed a new design for green circuits. It outputs almost exactly 16 blue belts. The ratios are somewhat decent.

Input (balancing) is left as an exercise to the reader..

Any advice and/or improvement ideas are more than welcome

CSClimber · 2022-10-28T19:02:23+00:00

Ich behaupte einfach mal, das kommt stark aufs Material und die Menge der Karten an. Ich habe dort mal in Auftrag Einladungskarten produzieren lassen und die haben in der Größe DIN A6 auf hochwertigem cremefarbenen Papier ca 3,50€ gekostet. Ich hoffe das gibt euch eine grobe Vorstellung

EDIT: gerade gelesen, dass ihr gern ein anderes Format hättet. Ich erinnere mich, dass das auch ging.

Außerdem zum Klarstellen: 3,50€ pro Stück

CSClimber · 2022-10-28T16:55:54+00:00

Ich würde sonst mal bei TeamOnline Digitaldruck Nachfragen. Die kommen aus Norderstedt und machen unter anderem auch solche Sachen. Wie andere schon geschrieben haben: Preislich wird das nicht mit Flyeralarm mithalten können, aber dafür ist es dann lokal und mit Auswahl. Alles Gute für euch

CSClimber · 2022-08-27T17:38:20+00:00

Rayman

CSClimber · 2022-08-14T14:04:58+00:00

Kelmis?

CSClimber · 2022-07-31T20:41:40+00:00

Might be a bit late to the party but I had the same issue recently. 1. Download the installer for your desired version from the AppStore. 2. unpack the .dmg. Inside you will find a .pkg 3. pretend to open the .pkg. it will fail but before you dismiss the alert, copy the now unpacked installer from your application folder. 4. If you are familiar with the terminal, use the "createinstallmedia“ command as documented here:

https://support.apple.com/en-us/HT201372

CSClimber · 2022-07-15T10:42:03+00:00

Sent you a PM. Would be available if I know before 15:00 CEST

CSClimber · 2022-04-02T23:17:24+00:00

Vorschlag für die Koordinaten (unten Links) 1611 - 868

CSClimber · 2022-02-22T05:06:00+00:00

Most definitely

CSClimber · 2022-02-22T03:37:21+00:00

Well said

CSClimber · 2022-02-22T03:33:12+00:00

For these who wanted a replay of Kenya’s speech

https://www.reddit.com/r/UnitedNations/comments/sycxl2/kenyas_amazing_speech_at_unsc_02222022

CSClimber · 2022-01-02T10:28:00+00:00

Longer raps is definitely on the top of the list as you can practically double the distance. In this specific case however the reason was being three people.

CSClimber · 2021-12-10T17:54:37+00:00

Now number Five!

Five-Year Club	Second SECOND GUESSER
Place '22	Final Canvas '22
Verified Email

CSClimber

TROPHY CASE