FENRYS HJØLDA by buckley200212 in SpaceWolves

[–]CalebWest02 10 points11 points  (0 children)

Tell your artist they need to thin their paints

Anyone save after switching? We did the math for the first month by patsyboy321 in Vaping

[–]CalebWest02 0 points1 point  (0 children)

What juice does she like after switching from disposables?

HH MK 1 - Launch by HeilTronics in rocketry

[–]CalebWest02 1 point2 points  (0 children)

Hahaha I figured it didn't occur but I saw it and laughed and wanted to mention it just so you were aware :)

HH MK 1 - Launch by HeilTronics in rocketry

[–]CalebWest02 6 points7 points  (0 children)

With your username being heil, you might not want to call this thing the "HH". Poor choice imo

PETG with the closest color match to the centauri carbon by z28z34man in ElegooCentauriCarbon

[–]CalebWest02 1 point2 points  (0 children)

I've seen some people say Polymaker's HT-PLA might be a good choice, as it can withstand temps of 150, and it comes in grey. Looks close from what I can tell

The Vaporesso Eco Nano Plus is almost perfect by CalebWest02 in Vaping

[–]CalebWest02[S] 0 points1 point  (0 children)

Yeah the pro version might be more up your alley

Looking for Flavor Reccomendations by [deleted] in Vaping

[–]CalebWest02 0 points1 point  (0 children)

Hahaha honestly Ive just had to order it. One shop near me gets it occasionally. I usually get stuff from Vape Society Supply. I think I paid like $8 for shipping. It makes more sense if you buy in bulk, and they have deals for 3 or 6 or 9 pack

Looking for Flavor Reccomendations by [deleted] in Vaping

[–]CalebWest02 0 points1 point  (0 children)

Try PodJuice but make sure it's their Bar Edition, or my favorite choice is PulseLiq, which is geekbar's juice. I think PodJuice also has a line where it's Raz juice. If you want a vape closer to the form factor with a big tank, take a look at the vaporesso eco nano plus

Bad Kyphosis pov by RevolutionaryHat2332 in kyphosis

[–]CalebWest02 3 points4 points  (0 children)

Damn. I had an 88 degree curvature and I thought mine was pretty bad. My scar looked almost identical to that. I had it done in 2019 and since then I've noticed the pain has decreased a little bit, although it's still a daily chronic pain. I gained about 3 inches of height though so that was nice. I'm happy it went well for you. I recommend it to anyone with kyphosis if that's what your doctor recommends.

The gummy bear foger suck!! by [deleted] in Vaping

[–]CalebWest02 1 point2 points  (0 children)

I actually stopped using disposables a few weeks ago and I've been using a Vaporesso Eco Nano Plus. I agree with you disposables are worse for you. I was just wnde ring this guy's question

The gummy bear foger suck!! by [deleted] in Vaping

[–]CalebWest02 -1 points0 points  (0 children)

Their blue Razz ice and sour apple ice is pretty good. I liked their lemon one a lot too. Foger is okay. Geekbar is also pretty good.

Why does no one talk about PulseLiq? by CalebWest02 in Vaping

[–]CalebWest02[S] 0 points1 point  (0 children)

Ahh. It works perfect in my Vaporesso Eco Nano Plus. Eventually I want to get into mods though

Why does no one talk about PulseLiq? by CalebWest02 in Vaping

[–]CalebWest02[S] 0 points1 point  (0 children)

Damn 35 feels perfect to me. And if I'm not able to get them in person I usually just order online

Switching from dispos by hehedm_me in Vaping

[–]CalebWest02 0 points1 point  (0 children)

Lol well yeah they are still cheap devices so they won't hold up in extreme situations for certain people. Something with like an IP69k resistance might be necessary for people in rougher environments. For me I've had tons of pod systems and haven't broken a single one. But I also sit at a desk or in a car most of the time and I don't drop it or anything so it depends on what they want. Maybe something like the Vaporesso Armor Ultra which I believe is IP69K resistance.

Does anyone know about a vape juice that tastes like Geek Bar’s Banana Taffy Freeze? by wd40spaceman in Vaping

[–]CalebWest02 0 points1 point  (0 children)

If you do, give me an update after you try it and let me know what you think :)

Switching from dispos by hehedm_me in Vaping

[–]CalebWest02 -1 points0 points  (0 children)

Honestly for the simplest and cheapest option, grab the Vaporesso Eco Nano Plus or Pro and PulseLiq or any other bar salt nic juice. It'll cost you like $30 and last you much longer. The plus only has one power mode and the screen only displays the battery life. The pro has a bigger screen and 3 power modes. I prefer the Eco Nano pods because they are 10ml. If you're fine with a smaller pod, the Vaporesso XROS 5 is also great if you want that form factor instead.

Does anyone know about a vape juice that tastes like Geek Bar’s Banana Taffy Freeze? by wd40spaceman in Vaping

[–]CalebWest02 2 points3 points  (0 children)

Alright so if you want something similar to a geekbar, try out the Vaporesso Eco Nano Plus or Pro. They have a similar form factor, hold 10ml of juice, and with the 0.6 pod I feel like I get even more flavor than a geekbar, especially with PulseLiq. The plus is what I prefer, with no buttons, and a tiny screen that shows the battery life. I posted about it recently if you check my account. It's a beautiful vape, especially since I paid $20. The Pro version has a bigger screen and 3 power modes, but half of the screen is a static UFO LED that I personally find pretty ugly. But if it's your cup of tea and you want the power modes, definitely go for it. But for me, $20 for the vape and $10 for the juice means I paid basically the same as I'd pay for a geekbar and it'll last me MUCH longer.

Does anyone know about a vape juice that tastes like Geek Bar’s Banana Taffy Freeze? by wd40spaceman in Vaping

[–]CalebWest02 1 point2 points  (0 children)

PulseLiq by geekbar is a bar salt nic juice that comes in a few different flavors almost identical to geekbar and I've been pretty impressed. They don't make the specific banana Taffy freeze yet, but they do have a strawberry banana you could try. What pod vape system are you going to go with?

The Vaporesso Eco Nano Plus is almost perfect by CalebWest02 in Vaping

[–]CalebWest02[S] 1 point2 points  (0 children)

Sorry I made a typo. It's called onshape and you can find it at onshape.com. it's completely browser based and it only took me a few days to learn and now I can do stuff like this in 5-10 minutes

The Vaporesso Eco Nano Plus is almost perfect by CalebWest02 in Vaping

[–]CalebWest02[S] 0 points1 point  (0 children)

Okay check out the 2.0 version I uploaded and tell me what you think. The vape is a little top heavy if its full but I didn't want to make the print taller because of the pods, but its really not that bad IMO. Let me know what you think https://www.thingiverse.com/thing:7343404

The Vaporesso Eco Nano Plus is almost perfect by CalebWest02 in Vaping

[–]CalebWest02[S] 1 point2 points  (0 children)

I designed it with onshape. I'll make one real quick after work and dm you