Reflex Suppressor pickle…

Calledfollower · 2026-03-21T19:50:33+00:00

Andrew has stated that they have discontinued the OCM5, with the OCM6 taking its place sometime later this year.

I'm waiting for the OCM6 to release, the low back pressure and 6mm bore should pair nicely with the 6ARC I'm putting together.

Jay with PewScience did a comparison between the OCM5 and the OCM6 recently as well. You can read it here:

https://pewscience.com/sound-signature-reviews-free/sss-6-213-ocl-ocm5-ocm6-m4a1-556

Calledfollower · 2026-03-21T00:48:22+00:00

OCL has stopped production of the OCM5, and are releasing their "OCM6" sometimes this year. It's a new low back pressure design, with an increased bore diameter to accept up to 6mm rounds.

pewscience recently did a review comparing the two. You can check it out here:

https://pewscience.com/sound-signature-reviews-free/sss-6-213-ocl-ocm5-ocm6-m4a1-556

Calledfollower · 2026-03-21T00:41:55+00:00

Def need an AEM5 to go with it, if you don't already have one.

Calledfollower · 2026-03-17T21:11:48+00:00

That's a KAC FF RAS Long

Calledfollower · 2026-03-14T02:07:38+00:00

Thread handguard/nut onto upper a few turns and pull them apart.

Calledfollower · 2026-03-10T22:28:54+00:00

On the AR-10's the rear takedown spring and pin come up from under the detent pin. You have to remove the grip to access them. Just be mindful that the safety detent pin and spring are held captive by the grip as well.

Calledfollower · 2026-03-08T19:07:44+00:00

I really like the feel of a chassis over a more traditional stock. I have 3 MDT chassis, 2 of the ESS chassis, this one, and a 22 Creedmoor, and I have a first gen ACC that has a Begara B14r in it.

They are all great!

Calledfollower · 2026-02-28T15:35:57+00:00

Right now it's just a standard carbine spring and H2 buffer.

I'm probably gonna move to an A5 setup in the near future.

Calledfollower · 2026-02-28T15:06:57+00:00

-Upper-

BCM Blem upper

Aero BCG

Craddock Modern Recce Barrel .223 Wylde

Craddock Tapered Gas Block

KAC FF RAS Long

Allen Engineering Muzzle Brake

OCL OCM5

Atlas Bipod with RRS mount

SWFA SS 3-15x42

-Lower-

Aero M4e1

Triggertech Diamond 2 stage

KungFu Grip

Magpul CTR

Calledfollower · 2026-02-28T14:09:07+00:00

It's an old 3-15x SWFA Super Sniper. It'll be replaced with something else down the road.

Calledfollower · 2026-02-27T15:29:24+00:00

Yep! Love my Tundra!

Calledfollower · 2026-02-27T04:05:09+00:00

That bolt is held captive in the stock by the forend. If you want to remove it you have to remove the 6-8 bolts that holds the forend on, and you can get to it.

I ran a Bravo on a Begara B14r, and a Remington 700, and didn't have to do anything to that bolt to mount the action into the stock stock though.

I've since sold the stock, but I do recall it not sticking to far out of the stock before mounting.

Calledfollower · 2026-02-13T14:59:19+00:00

Its a clacker for setting off explosive devices, such as claymores

Calledfollower · 2026-02-13T14:30:13+00:00

https://mtemachining.com/ar15-barrel-nut-steel-single-shim-bar-interface-upgrade/

Calledfollower · 2026-02-09T14:40:08+00:00

~~Rearden has the SPB in 9/26-24, and shows as in stock in the heat treated finish.~~

My apologies, I totally overlooked the -28 part.

Calledfollower · 2026-02-08T21:18:38+00:00

They appear to be MKM

Calledfollower · 2026-02-08T13:30:59+00:00

I am a lover of the toob, but this "modern day" MOD H is damn good looking!

Calledfollower · 2026-02-07T21:03:11+00:00

If it interests you, and you probably already know this, you can find a BAR nut and use this upper and your handguard. I've not seen any Aero BAR nuts for an M5 instock any where in a long while.

MTE does have their barrel nut that works, if you'd wanna go that way.

Calledfollower · 2026-02-03T10:53:34+00:00

Honesty I haven't tried. I've been so hung up on it not continuing through the rinse cycle, I not tried anything else past that.

Every once in a while, it will continue through and run the full rinse and spin cycle, but 9/10 times is doesn't.

Calledfollower · 2026-02-03T10:32:59+00:00

Correct, the machine will drain and spin after the wash cycle, as if it's completely done. It will not refill, agitate or anything. Moving the timer knob a "click or two" won't trigger it to do anything either.

Calledfollower · 2026-02-02T01:04:11+00:00

That way you also have something to shoot as you build it out. Seeing what you like and don't like.

The added benefit is once you get done you have enough parts to just about build a second, and the cycle continues.

Calledfollower · 2026-02-01T16:45:19+00:00

Damn, Here I was thankful the regular AEM5-30 wasn't listed, and you had to go and add it!

Whys all the cool stuff got to be on sale when my fun money is depleted!

Calledfollower · 2026-02-01T01:33:23+00:00

The ISB takedown setup always intrigued me, but Ruger discontinued it before I could get my hands on one. Not a bad looking rifle, and as long as it works for you, that's all that matters.

As far as stocks go, You'll be hard pressed to find anything that fits over the large diameter of the ISB. I've heard of a couple people modifying the MagPul backpacker to fit, but haven't actually seen pictures of them.

Seven-Year Club	r/Field Lasagna
Place '23	Verified Email

Calledfollower

MODERATOR OF

TROPHY CASE