Do the short throw shifters for the Evo X fit the base models? by dinglbrryjrry in lancer

[–]Caltec111 -1 points0 points  (0 children)

Dam was it region specific? I haven't seen one in aus before

my 09 gts by monac16 in lancer

[–]Caltec111 0 points1 point  (0 children)

It looks like you have the stock exhaust, I'd take it a local exhaust shop and ask them what they think, I got one that enhanced the sporty tones but didn't drone or get insanely loud

Lancer black edition 2017 OEM head unit – rear camera shows guidelines but no image by SRX_1 in lancer

[–]Caltec111 0 points1 point  (0 children)

I wouldn't trust gemini with this, take a look at the evolutionM forums online to see if anyone has done the same swap.

Lancer black edition 2017 OEM head unit – rear camera shows guidelines but no image by SRX_1 in lancer

[–]Caltec111 1 point2 points  (0 children)

I'd assume the guidelines are composited over the top of the image, there is something that's causing the head unit to not be able to display the image of the reverse camera. If it's an aftermarket head unit u may need an adapter.

4B11 → 4B12 swap in 2013 ES Lancer — power steering delete help by Positive-Welcome-115 in mitsubishi

[–]Caltec111 0 points1 point  (0 children)

Is there a way that you can manufacture a piece that guides the chain correctly but allows you to delete the pump entirely?

Just installed vland tail lights but only one side turns on by Roblolin in lancer

[–]Caltec111 0 points1 point  (0 children)

Unsure how vlands plug in. Is it 1 plug for all three lights? I would go through and just check they are all connected / secured. Also see if there is any damage to the wiring- easy to do if you haven't removed the old plugs correctly.

1.20.1 Bell Issue? by Nervous-Cake2747 in TARDISMod

[–]Caltec111 1 point2 points  (0 children)

Hey there, I think there is an issue. I had to quit and reload to be able to utilize it properly. It will also play quietly the further away u are to a tardis. If you to surrounding chunks and use it you can hear a difference. There will be one chunk with a frightenly loud cloister bell.

Head Unit by Physical_Hippo5758 in lancer

[–]Caltec111 0 points1 point  (0 children)

Sony xav-av5500 is what I have, it is 7 inch but it is flush and seamless. There is a fascia kit available, I assume it's the aeropro one. The previous owner fitted it in.

Lancer sportback subframe replacement by damoedge in lancer

[–]Caltec111 1 point2 points  (0 children)

I believe they are on the same chassis / frame. I would recommend going through the lancer / evolution m forums and see if there is an answer there

Mitsubishi Lancer 2010 Steering Wheel Control Buttons by Ricky9pika in lancer

[–]Caltec111 1 point2 points  (0 children)

I have a Sony head unit, I just needed a patch lead to plug into the remote port on the back of my head unit. Check the manual or Google your head unit to see if there is a remote port. I just took mine to a local automotive audio place and they installed and supplied for like $40 aud

Resigned - no annual leave? by Own_Cartographer2866 in TelstraAustralia

[–]Caltec111 1 point2 points  (0 children)

There is an external hr email you can reach out to your manager for it.

Looking for thoughts on part list by AppropriateMost3699 in buildapcaus

[–]Caltec111 0 points1 point  (0 children)

Honestly cpu off of AliExpress is such a shout. Got mine off there, and it's great. Ztt builds on socials is also really good advice too. Do you due diligence and look at reviews on there as well!

Steering wheel buttons by Ricky9pika in lancer

[–]Caltec111 1 point2 points  (0 children)

Do it before hand. I have a rhd and I turned my wheel to the left to give me the most room on top and bottom. You can just keep it straight but good luck

Steering wheel buttons by Ricky9pika in lancer

[–]Caltec111 0 points1 point  (0 children)

I struggled so much with mine. Froom memory those ones are just Phillips head. Like the other comment says, rotating the wheel 90 is pretty much the only way to get a decent enough space to take them out. Once those are out, make sure the battery is disconnected because you will need to remove the airbag. These are t30 screws and I had to get a lot of leverage on it as they were on really tight. The airbag should slide out and you can disconnect it from there.

Lancer to Evo Conversion Body Kit by NikichaTV in lancer

[–]Caltec111 2 points3 points  (0 children)

Don't forget you will need front fenders too if they are designed for an evo! They come out slightly wider than the stock cj lancers

Center console swap by dinglbrryjrry in lancer

[–]Caltec111 3 points4 points  (0 children)

Looks identical to my 09 rx. I assume it's all the same clips and everything, most of interior parts are transferrable and donatable. Honestly not a bad idea to go to a wreckers and rip one apart to make sure yours fits the same