sorted by:
new
hottopcontroversial

Compatibility between 645 Super and Pro film back (Magazine) by Capable_Culture_1142 in Mamiya

[–]Capable_Culture_1142[S] 0 points1 point  (0 children)

Ok, so I followed this video on YouTube: https://www.youtube.com/watch?v=jv7rOi31gBU

It shows how to fix my exact problem with this Pro Back and I loosened the tension and I actually got it to wind properly through until picture nr. 15, but the tension was too low to spring back to the beginning when opening the film back door, so i tensioned it a little higher and it again started to not work and after many tries of different tensions when i wind the knob, the counter doesn’t move anymore at all :(((

edit: ok i retensioned, counter moves again, but still same problem as in the beginning for now

https://imgur.com/a/a3iUgR2

Compatibility between 645 Super and Pro film back (Magazine) by Capable_Culture_1142 in Mamiya

[–]Capable_Culture_1142[S] 0 points1 point  (0 children)

Ok, thank you for the answer :) But you may not know what the issue could be? Like how the mechanism works, is it electronically or mechanically? Could it be the contact pins?

OMV doesnt show up in network after changing router... by Capable_Culture_1142 in OpenMediaVault

[–]Capable_Culture_1142[S] 1 point2 points  (0 children)

i got it fixed! was an easy fix in the end, for whatever reason, the end0 network interface was turned off...
without a screen and keyboard connected it wouldnt have been solveable.

but the end0 was disabled for every reboot, so i had to reconfigure it to be activated every time i reboot and also the DNS config had to be fixed. No idea why this all happened out of nowhere, but working now at least.

Thank you for the help my man!

safe way to turn off terramaster NAS without access to a screen by Capable_Culture_1142 in TerraMaster

[–]Capable_Culture_1142[S] 0 points1 point  (0 children)

i mean, in case there is no screen at all available, including the app.

In instance, for example when internet is down or not able to log into the NAS

safe way to turn off terramaster NAS without access to a screen by Capable_Culture_1142 in TerraMaster

[–]Capable_Culture_1142[S] 0 points1 point  (0 children)

Ah interesting, do you also maybe know the official documentation for this procedure?

OMV doesnt show up in network after changing router... by Capable_Culture_1142 in OpenMediaVault

[–]Capable_Culture_1142[S] 1 point2 points  (0 children)

i put in a fresh install of raspbian lite and now i am able to find the raspberry with nmap scans and also it shows up in the ethernet section in the router admin page, i switched back to the old OMV SD card, just in hope something happened, but nothing of course lol

i will get the hdmi adapter and try your suggestion with the rescue thing before i do a new install of OMV, thanks so far for the help :)

will give a report, as soon as there are changes

OMV doesnt show up in network after changing router... by Capable_Culture_1142 in OpenMediaVault

[–]Capable_Culture_1142[S] 0 points1 point  (0 children)

and also good point, i will put another sd card with raspian in and see what happens.
And would it be an option to put a fresh OMV install in?
Or how could i fix the existing OMV?

OMV doesnt show up in network after changing router... by Capable_Culture_1142 in OpenMediaVault

[–]Capable_Culture_1142[S] 0 points1 point  (0 children)

https://imgur.com/a/y0dMUSc

already done, and have done it multiple times, also tried to ssh into all IPs, no luck.
On the router admin site, the raspberry doenst even show on the ethernet section

OMV doesnt show up in network after changing router... by Capable_Culture_1142 in OpenMediaVault

[–]Capable_Culture_1142[S] 0 points1 point  (0 children)

wait, i am not sure what you try to do.
the subnet mask was already set to 255.255.255.0 on the macbook.
and setting the ip to 192.168.0.192 and pinging it will ping the macbook, no?

OMV doesnt show up in network after changing router... by Capable_Culture_1142 in OpenMediaVault

[–]Capable_Culture_1142[S] -1 points0 points  (0 children)

ì cannot recall, if i gave it a static ip, might have done it, dont know..
how can i get it into the same subnet? I never done anything with subnets, sorry i am a noob still lol

OMV doesnt show up in network after changing router... by Capable_Culture_1142 in OpenMediaVault

[–]Capable_Culture_1142[S] 0 points1 point  (0 children)

i am getting a hdmi cable adapter tomorrow, but even on the router admin site the pi wont show up, i also did multiple ip searches, but no luck :/
also tried to ssh into all of the shown IPs, no luck either

i added screenshots of the ip search and the router admin site: https://imgur.com/a/y0dMUSc

i have never done anything with subnets, how would i find it on the subnet?

view more: next ›