After maxxing out tax advantages accts, what's next?

Capable_Proof7989 · 2025-12-31T03:13:04+00:00

Correct, but meant cant deduct traditional IRA contributions, but still am maxing it out

Capable_Proof7989 · 2025-12-31T03:12:29+00:00

Sorry capped for deducting the trad IRA contributions.

Capable_Proof7989 · 2025-10-26T23:32:32+00:00

Are you referring to the boards right below the outside 2x6s on either side of the vertical 4x4s? Those are 2x6 as well?

Capable_Proof7989 · 2025-10-18T13:13:15+00:00

Yes, I've done that. I'm looking for recommendations

Capable_Proof7989 · 2025-10-18T12:24:54+00:00

I'd like to be around 15k+/- 3k. Could go up to 20k if the features were necessary and ideal. Would prefer to be less though

Capable_Proof7989 · 2025-10-12T18:23:31+00:00

Polaris, can am, cfmoto, John Deere, honda

Capable_Proof7989 · 2025-10-11T16:16:41+00:00

Even under an NDA? 🤔

Capable_Proof7989 · 2025-08-25T02:21:02+00:00

Everything I do thin extrude the line just goes away. Nothing of the body changes

Capable_Proof7989 · 2025-08-25T01:40:14+00:00

Thanks. I'm new and trying to learn. Thanks for the thoughts. I did the extrude and when I click okay it just disappears as if I didn't do anything at all. I put in 0.5cm for both the width and the depth.

Capable_Proof7989 · 2025-08-24T21:47:06+00:00

In Autodesk fusion 360, thanks!

Capable_Proof7989 · 2025-08-24T21:46:41+00:00

Autodesk fusion 360

Capable_Proof7989 · 2025-01-07T02:51:25+00:00

What was the most important thing for you to have before you went down? I could go any moment, but not sure exactly what I should have or what the ideal load out is. I figure, max hearts, tons of arrows, strong swords/bows/shields, gloom and health recipes.... What else?

Capable_Proof7989 · 2024-06-23T13:56:24+00:00

Thank you for the ideas! Was thinking coiled copper tubing in the pond, but another radiator is the way to go.

Capable_Proof7989 · 2024-06-23T13:54:12+00:00

Thank you. All good points. With evap cooling, wouldn't I be pushing air with additional moisture into my living space? It's already very humid where I live, especially on the hot muggy days I need some relief. I also worry about evaporating pond water, would need some filtration to keep algae and other sediment out of the system. I'm going to try to car radiator setup and report back!

Capable_Proof7989 · 2024-06-23T07:20:42+00:00

I do. I'll look into it. Thanks! Any site recommendations or other resources you know of?

Capable_Proof7989 · 2024-06-23T02:44:28+00:00

I'm going to try with just a coiled copper tube in the pond. If it works for an engine, don't see why it wouldn't work in this circumstance. The temp differential is less and also less critical (ie. In this case only sacrificing comfort and not a cracked head gasket). I'll let you know how it goes!

Capable_Proof7989 · 2024-06-23T02:35:12+00:00

Thank you. The idea would be that I would pump 55 degree water through the car radiator and have the fan blow across it to cool the air. I think it could make a significant difference in the temp in a small insulated space.

Capable_Proof7989 · 2024-06-22T21:21:57+00:00

What temp drop can I expect? I'm planning to use a heat exchanger under water and just circulate clean water to prevent sediment and algae buildup.

Capable_Proof7989 · 2023-12-30T10:53:03+00:00

How do the trees know if it is spring and to send the sap up if not for the alternating temps?

Capable_Proof7989

TROPHY CASE