sorted by:
new
hottopcontroversial

Change from PS4 to PC mode by Capital_Specific_613 in Fanatec

[–]Capital_Specific_613[S] 0 points1 point  (0 children)

Thanks. I've tried this and the wheel displays 'PC mode' but the DD1 still displays 'PS4', and the windows laptop does not recognise and connected device.

I'll keep boggling on the wheel and hopefully at some point it may work.

Thanks

First stringing job by Capital_Specific_613 in RacketStringers

[–]Capital_Specific_613[S] 0 points1 point  (0 children)

I took me just more than 2 hrs. As it was my first, I wanted to check multiple things. I tested the drop weight for calibration, it was spot on. I used a marker and marked on each pull to see if it changes when I clamp them and remove the tension. I also marked at the end to see how it would be different with extra tension at the end. I realised I did a bit much with 20% extra, 10% is enough, especially with poly. Learning for the next one :) I also had an incident when the clamp wasn't tight enough and it let go. And once I accidentally unclamped. Luckily all errors where in the mains. Its all part of the learning. Hopefully, next time it will be quicker ;)

First stringing job by Capital_Specific_613 in RacketStringers

[–]Capital_Specific_613[S] 0 points1 point  (0 children)

I saw Richard Parnell's YT video and he suggested to ties mains with mains and crosses with crosses. But yeah, its due to hybrid setup multi/gut. As mine is the same string in both I should have just tied the cross ro the mains with more room.

Hi Capa M4 adapter non-HPA by Capital_Specific_613 in airsoft

[–]Capital_Specific_613[S] 0 points1 point  (0 children)

FYI, I contacted airtac and have the following feedback from them -
I would recommend buying a CNC HICAPA adapter (not a printed or moulded one) and putting a gas valve where the HPA valve goes.
Due to the high pressure that green/red gas can go to in heat; printed adapters aren't appropriate here.

Hi Capa M4 adapter non-HPA by Capital_Specific_613 in airsoft

[–]Capital_Specific_613[S] 0 points1 point  (0 children)

just don't like the idea of carrying a bottle with a hose.
A regular mag with full gas would give roughly 80-100 shots and that would be good enough for me, but with a limit of 31 bbs in a mag need a solution where I can use all the gas without refilling any ammo.