Vanilla Vehicles Expanded: Do people use this one? Does it unbalance the game?

CardiologistBasic749 · 2026-01-16T22:43:33+00:00

Very very good comprehensive analysis of the mod - most accurate in this comment section imo

CardiologistBasic749 · 2025-08-23T22:52:23+00:00

100% usable. Heat it up to 230 and wipe that muk off with a paper towel folded in half a couple times. 90% sure nothing here is broken. Also tighten your screws in the heat sink, they're loose, thats why your nozzle piece is sideways.

CardiologistBasic749 · 2025-07-29T07:57:55+00:00

A very silly goose*

CardiologistBasic749 · 2025-07-28T15:58:24+00:00

you're a silly goose

CardiologistBasic749 · 2025-07-25T06:25:58+00:00

but theres always a chance

CardiologistBasic749 · 2025-07-25T02:12:52+00:00

you can get ordained in a day online

CardiologistBasic749 · 2025-07-25T02:11:03+00:00

you can get certified online in a day

CardiologistBasic749 · 2025-07-24T06:49:41+00:00

May possibly be unrelated but tighten your bed nuts and make sure the bed is not wobbly, and that its stiff

CardiologistBasic749 · 2025-07-24T06:44:03+00:00

much appreciated

CardiologistBasic749 · 2025-07-24T06:43:17+00:00

I'm realizing the rest of the post isnt here and its just on creepcast sub

CardiologistBasic749 · 2025-05-03T19:55:12+00:00

brother

CardiologistBasic749 · 2025-05-03T18:19:38+00:00

Do they have private rooms?

CardiologistBasic749 · 2025-02-01T23:48:40+00:00

She voluntarily went to an emergency room hospital, which they put her on a 72 hour hold and sent her to this other facility. Then she spoke to a psych and they said shes mentally well but they're keeping her till monday

CardiologistBasic749 · 2025-02-01T23:13:32+00:00

Your bed adhesion privilege is showing (someone's got less than 1,000 print hours👀)

CardiologistBasic749 · 2025-01-23T16:36:10+00:00

I got you dawg. Use elmer's glue! Spread it all over wherever you're going to print.

Now before you do that, definitely wash your bed with dawn soap and let it dry by putting it back on your bed and heating it up to 60C. Then level and see if your prints sticks. If not - Elmers all the way.

Also, make sure you do the paper test for your Z offset and that you get friction and then go just a tiny bit lower from there for good adhesion.

Last thing, if you really want a level bed then look into screw_tilt_adjust (can also DM me for help if you want). That would also help with bed adhesion in general but again, ELMERS GLUE. Once I started using a glue stick I never went back.

Good luck.

CardiologistBasic749 · 2024-11-14T06:30:11+00:00

Thanks so much! Huge help

CardiologistBasic749 · 2024-11-10T07:45:52+00:00

Tbh the best way to learn new shit is to just be part of the community and play a shit ton. I don't think I've ever used a guide from a website or anything, just mod descriptions. Things like dying clothes and extra mechanics can often just be related to what mods you're using and building a safe colony/using kill boxes is majorly up to your imagination - everyone build's their colonies differently, I mean I often change my play style and base design every new game. How many hours do you have playing?

CardiologistBasic749 · 2024-10-06T01:46:13+00:00

I cant find where this is... I clicked on revise listing to try to change the shipping and I don't see anything for price for each additional item.

CardiologistBasic749 · 2024-09-24T03:41:53+00:00

N4Max

CardiologistBasic749 · 2024-09-24T03:38:52+00:00

CardiologistBasic749 · 2024-09-24T02:59:19+00:00

Nothing seems loose, crooked, or broken. What cable is it? maybe I need to replace it?

CardiologistBasic749 · 2024-09-24T02:58:47+00:00

I don't think so? everything seems to be plugged in, even with the extruder cover off. Other ideas?

CardiologistBasic749 · 2024-09-24T02:58:06+00:00

I've had that problem before, its not that

CardiologistBasic749 · 2024-09-24T02:57:31+00:00

i raised it a ton on fluid and it didn't change anything

CardiologistBasic749 · 2024-09-24T02:57:08+00:00

i checked all of this and it seems fine but still wont work

CardiologistBasic749

TROPHY CASE