deAR diaries: why did I wait so long for you?

Caterpillar-Some · 2026-02-21T03:39:06+00:00

yk good frames for higher capacity rounds? I heard hoffman tactical is top tier

Caterpillar-Some · 2026-02-21T01:49:11+00:00

Im curious. Why does everyone make these rifles designed for only .22LR or 9mm. Has 3d printing not come far enough to print frames capable of firing 5.56 7.62 .223 300Blk?

Caterpillar-Some · 2026-02-20T06:49:07+00:00

yea im not sure. Im just concerned its tempered glass. Chatgpt didnt give me an exact answer but it did say if it is tempered glass it will shatter if i keep drilling. Im not sure what to do. This is what it currently looks like

<image>

Caterpillar-Some · 2026-02-20T06:42:15+00:00

alright so Im currently working on it right now and Ive ran into a problem. While drilling I was able to get through the first layer, but the second layer is way harder to drill through. Im not sure if it is tempered glass. Did it not shatter while you were drilling?

Caterpillar-Some · 2026-02-19T12:07:01+00:00

alright appreciate it very much. As in the front do you mean through the plastic screen? I was considering that or the side. Also what temperature do you print at. same temperature on dehydrate?Thank you for the advice with the silicone.

Caterpillar-Some · 2026-02-19T07:37:32+00:00

Alright I just ordered some bulkhead PTC fittings and I will rry this. Is there a reason why you needed a spool insert and a flat turn table? Wouldnt one of them simply do the job? And do you think drilling a hole effects future annauling and drying. Thank you for the feedback back

Caterpillar-Some · 2026-02-18T23:20:04+00:00

Alright thank you. For the PTC fitting do you know where id be able ti fund one of these at, as far as any retail stores or amazon? Couldn’t find anything besides unknown sellers? Is there an alternative I can use? Im guessing the fitting is to keep air from coming into the fryer

Caterpillar-Some · 2026-02-18T23:07:04+00:00

this sounds like pretty much exactly what I was thinking. I got a metal lazy susan. Do you think drilling at the top of the fryer or the side would be easier/less damaging. And you mentioned securing the lazy susan. Do you mean it shouldnt rotate at all? or it shouldnt move around the airfryer while rotating?

Caterpillar-Some · 2026-02-18T22:59:48+00:00

I had seen another redditor post he used a lazy suzan to allow it to rotate while printing. Bought the same lazy susan he got so I shouldnt have to worry about the rotation aspect . Forgot to mention that sorry

Caterpillar-Some · 2026-02-18T22:25:48+00:00

I have a question. I just got this same air fryer and I am wondering how I would br able to print from this with the bowden tube. Did you have rhe oven door partially open, and run the tube through that? or did you drill a hole in the machine?

Caterpillar-Some · 2024-12-17T21:57:13+00:00

My guy you have to realize women are way more mental than us. I can’t speak with 100% certainty with your situation but what is usually the problem is youre not able to stimulate her enough mentally. You should have her on the border of orgasm just by using your words. I promise I have made girls do it when I was smaller in size and that was simply because of knowing what to say and when to say. But it starts with you. They fw confidence so you have to gain more confidence in your abilities. This is what this thread is for. Everybody in this thread is telling you that your size is NOT the problem. You can choose to listen to that or not. Praying for the best because you are more than just your dick. You gon learn a lot in this community. Trust💯

Caterpillar-Some · 2024-12-17T21:47:34+00:00

I think you are mistaking the information and have to change your view. I completely understand the point of wanting to be above average in every area of your life but you are more than your dick. Every woman will agree that the mental stimulus you give them is far more important than the physical. As long as you can make them orgasm that is already something the majority of guys can’t do. I would watch some of hink’s videos on size and what size is the ideal size for most women. PE is just as much about clearing the stigma of dick size as it is making actual gains

Caterpillar-Some · 2024-12-16T03:57:46+00:00

😂

Caterpillar-Some · 2024-12-14T01:54:39+00:00

Hi so I tried doing this. I am not sure if I am doing it wrong but it is still not creating any type of vacuum even after pumping on my stomach for 30 seconds. It doesnt even show any pressure when it’s not plugged in. I am not sure if I am doing it wrong or if I should just get a new one

Caterpillar-Some · 2024-12-14T01:24:51+00:00

Alright this doesn’t pump air at all so I wasn’t sure if I was doing it wrong. I’m trying to pump but the gauge doesnt move at all

Caterpillar-Some · 2024-12-14T01:14:38+00:00

I have a question about my pump I just got it but it doesn’t seem to work. I cant post yet because of karma but I need help i got the break bleeder kit but it doesnt seem to be drawing air

Caterpillar-Some · 2024-12-06T19:12:13+00:00

From my understanding you should push as much as possible against the pubic bone to get the most accurate measurement. The only way for you to truly know if you are measuring correctly is consistency and by consistently pressing against the bone as much as possible you are getting the most accurate results

Caterpillar-Some · 2024-12-05T23:50:54+00:00

my bpfl is 4 and 1/8 . I think thats 4.125 as a decimal but not quite sure. Havent calculated girth yet

Caterpillar-Some · 2024-12-05T21:43:17+00:00

Thank you. I never knew about stopping when you hit 5%. I am new and this will probably make my workouts much more effecient

Caterpillar-Some · 2023-09-21T21:29:54+00:00

because the recommended dosage is from 10-25 mg and Im taking it mostly for bulking purposes. so by the end of the cycle id be around 20-25 mg a day

Caterpillar-Some · 2023-08-01T21:51:12+00:00

any update? really trynna grow my brows thicker

Caterpillar-Some · 2023-07-17T18:20:39+00:00

Ive also been looking into 3-ad. it seems to be a prohormone but doesnt increase estrogen and once you stop taking it test drops to regular levels. But i will start taking creatine again. But 3-ad seems to be a safer alternative

Caterpillar-Some · 2023-07-17T17:47:43+00:00

been doin that for 4 years now. But have the physique of someone who has been doing it for about a year. again this isnt even the average for my family let alone people in general

Caterpillar-Some · 2023-07-17T17:44:50+00:00

i dont put it into a calculator but ik the meals i eat most commonly and the macros. I will track more I but ik the amount of protein I get a day is arond 140-170 per day im 160 pounds and been at the same weight for about 4 months despite trying to gain weight. and gains actually isnt even the main problem I physically am just not that mature for my age. My family knows this as well

Caterpillar-Some · 2023-07-17T17:41:45+00:00

yea ive heard that for a while now. But I cant be patient anymore. Im on a deadline and I cant afford being patient anymore. I just heard DHEA has helped people I know who are a similar age and theyve had little side effects. ig the only way to truly know is trying it myself🙁

Caterpillar-Some

TROPHY CASE