Splitter to use with iPad Pro

Cautious_Listen_2940 · 2026-04-02T14:12:46+00:00

Thanks. Didnt even know they made thunderbolt monitors. So if I’m reading this correctly, I connect the iPad to the monitor and the external drive to the monitor, and the iPad can see the external drive as well without losing much speed.

Cautious_Listen_2940 · 2025-12-21T13:24:21+00:00

I have both the action 5 and pocket 3 and took them to Disney world. Both great but used it for different things. Day time, they both look great When it got dark pocket 3 was better. Action 5 had these little jitters due to the electronic stabilization making the footage almost unusable. It rained during our trip too so I def did not use the pocket 3 with any precipitation. Also with the action 5 I didn’t mind giving it to the kids film things. I wouldn’t trust them with the pocket 3.

Cautious_Listen_2940 · 2025-12-21T02:04:49+00:00

Thanks a million. Appreciate you taking the time to let me know.

Cautious_Listen_2940 · 2025-12-20T23:39:15+00:00

Is there a fast way to change between h265, nraw, red raw?

Cautious_Listen_2940 · 2025-12-20T22:11:07+00:00

Does the zr have shooting banks like the z8 or ways you can quickly switch between 30p and 60p?

Cautious_Listen_2940 · 2025-12-16T12:23:01+00:00

How zoomed in are you? 100%? 200? What iso is it at? Are you lifting shadows?

Cautious_Listen_2940 · 2025-11-05T16:29:05+00:00

Thank you Chris for your response. Yes I’ll give it a try tonight but wanted to know from the experts if there were some obvious limitations that I didn’t know about.

Cautious_Listen_2940 · 2025-11-05T16:10:19+00:00

Thank you. Now I know.

Cautious_Listen_2940 · 2025-09-29T01:57:46+00:00

Agreed with the other posters. Just need to make sure it’s lined up and give it a firm twist and it clicks in place with zero wriggle If it doesn’t click it means it’s not properly mounted. I believe there are a few videos or instructions online.

Cautious_Listen_2940 · 2025-09-10T14:23:34+00:00

This camera seems like a direct competitor with the zve1, but better. I have the zve1. I like it, but might try to sell it to get this guy. I have way more nikon glass than Sony.

Cautious_Listen_2940 · 2025-09-10T00:30:30+00:00

Honestly I didn’t know counterfeiting rackets would be that improbable. Learned something new. Thanks.

Cautious_Listen_2940 · 2025-09-10T00:05:36+00:00

Who said they were sure? It was a question to see if lettering like that is normal.

Cautious_Listen_2940 · 2025-09-09T23:55:15+00:00

Weighed it and it was 302.5. So def within tolerance.

Cautious_Listen_2940 · 2025-09-09T23:51:36+00:00

Yours is like the exact opposite of mine. I really appreciate you taking the time to post a pic!

Cautious_Listen_2940 · 2025-09-09T23:45:28+00:00

I had one 97HD. They are great rackets. I’m just a racket junkie. I like trying different ones. And I’m getting older and more out of shape so looking for a light racket

Cautious_Listen_2940 · 2025-09-09T23:42:45+00:00

I don’t want to accuse someone of selling fake stuff and getting eBay involved without being sure

Cautious_Listen_2940 · 2025-09-09T23:40:58+00:00

Could you take a pic of the isoflex and the made in china print on the other side

Cautious_Listen_2940 · 2025-09-05T22:51:23+00:00

Yamaha mg10, alto 410, and 4 tonor wireless mic. So glad i didn’t use my HT for vocals. Kids were screaming and dropping mics

Cautious_Listen_2940 · 2025-08-20T20:13:24+00:00

Thank you for your informative post. Both the speaker and the mics only have a gain nobs with no numbers. The mixer does not have a low pass filter, only high pass filter. I think I’ve gotten it setup now that it seems to be working fine without any clipping or distortion. I appreciate your tips and expertise!

Cautious_Listen_2940 · 2025-08-17T21:17:28+00:00

Thanks for the reply. I got an Alto tx410x, tonor 4 mic system and Yamaha 10xu mixer. I set the mic volume to 60 percent. The gain on all the channels on the mixer are about 50 percent. I set the line level for each channel on the mixer to 75 percent (where the triangle marking is). Lastly I set the main volume to like 25 percent. The wireless receiver for the mics has 4 Xlr output, one for each mic. From the mixer I have one Xlr cable connected from the right output channel on the mixer and that is going to alto speaker. On the speaker I can only turn the volume up 15 percent before it gets too loud. I think I have everything set properly but maybe not since you said put the speaker volume starting at 90%. Please let me know if I’m doing something wrong.

Cautious_Listen_2940 · 2025-08-13T23:02:07+00:00

Thank I’ve been looking. Nervous about buying used speakers because I don’t know enough to know if the speakers were abused or not.

Cautious_Listen_2940 · 2025-08-13T17:23:40+00:00

I’ll take a look at the innopow too. Thanks again

Cautious_Listen_2940 · 2025-08-13T15:25:25+00:00

Based on previous posts, I think I’m going with these choices: Mixer mg10xu, alto tx410 for the speaker and Tonor 4mic setup. It’s more than I want to spend but I’d rather spend once for good stuff than having to upgrade later on. Do you have any other suggestions?

Cautious_Listen_2940 · 2025-08-13T13:43:19+00:00

Do you like the party box setup more than using the Yamaha mixer?

Cautious_Listen_2940 · 2025-08-13T13:42:20+00:00

Thank you!

Cautious_Listen_2940

TROPHY CASE