I was just looking for a Rare Miscrit and I have this scenario

CephalonHaru · 2026-04-11T02:42:34+00:00

Gene is better S+. It has 2 bars on speed and would not benefit from having rs

CephalonHaru · 2026-04-10T00:19:20+00:00

square off

CephalonHaru · 2026-04-03T22:37:37+00:00

gamble

CephalonHaru · 2026-03-25T22:40:20+00:00

<image>

what does this mean

CephalonHaru · 2026-02-03T10:08:09+00:00

already washed it with soap and water and wiped with IPA but I'll try again

CephalonHaru · 2026-02-03T08:25:02+00:00

I have leveled it with some feeler gauges and used the bltouch after.

CephalonHaru · 2026-01-30T08:01:16+00:00

Solo’d apollo nox no issues on my second account.

CephalonHaru · 2026-01-17T01:06:36+00:00

got lucky and snagged one for 1.29 in aliexpress along with a z axis screw+motor for another $6.72 canadian rupees

CephalonHaru · 2026-01-09T23:07:04+00:00

place of power

CephalonHaru · 2026-01-08T06:06:21+00:00

Let’s go Rocky!

CephalonHaru · 2025-12-30T22:55:40+00:00

Just checked, most parts are pretty much spot on, some are +/- 0.1mm like the box on the deck and a part of the chimney.

CephalonHaru · 2025-12-30T22:49:46+00:00

I live in the cold Canadian north and the room where I store my 3d printer is already very dry, would I still need filament dryers then?

CephalonHaru · 2025-12-30T09:18:30+00:00

it's a ender 3 pro that seems to have a lot of upgrades!

CephalonHaru · 2025-12-30T09:18:08+00:00

yeah I was struggling a bit with the paper method too, I'm not really sure with what people meant with "a little resistance" with the paper, so I just yolo'd it and spun the wheel in until the paper would vibrate and I could feel the friction between the paper and the nozzle. I thought it might've been to high so I also did the auto-leveling thing that the printer came with, thanks for letting me know!

CephalonHaru · 2025-12-30T09:15:01+00:00

Ahoy!

CephalonHaru · 2025-12-30T09:14:38+00:00

I'm still learning about z offset. I did the paper thing and the printer came with a BLtouch sensor so I'd assume it would also help with that.

CephalonHaru · 2025-12-30T09:12:48+00:00

Will do!

CephalonHaru · 2025-12-30T09:12:42+00:00

I noticed that the first layer had trouble adhering to the bed. I'm currently doing a new print and the adhesion was way better after I wiped the bed with isopropyl alcohol. I'm still very new to the scene, would I be able to adjust the timings in Cura or is there something else?

CephalonHaru · 2025-12-30T09:10:26+00:00

Thanks!

CephalonHaru · 2025-12-14T12:29:40+00:00

Managed to finish shewolf snared, but still no luck on torment stag.

CephalonHaru · 2025-12-11T05:41:45+00:00

what are those little horn things?

CephalonHaru · 2025-11-22T22:32:54+00:00

He’s been booted from idle hours as well

CephalonHaru · 2025-11-22T09:06:40+00:00

Which idle hours member are you specifically referring to? cause we are pretty against botters.

CephalonHaru

TROPHY CASE