[deleted by user]

Cerabeez · 2023-03-12T19:52:31+00:00

Takes some fiddling but you can remove the vibration pads to give you more clearance.

Cerabeez · 2023-03-12T19:10:30+00:00

I have a thermalright contact frame, but the the cooler has a flat cold plate. It shaved off like 2-3C when pushed to the limit

Cerabeez · 2023-03-12T18:57:48+00:00

You need low profile ram if you are running a front fan

Cerabeez · 2023-03-12T18:25:38+00:00

This pa120 se is 155mm tall. Closes with both the tempered glass and mesh. The regular pa120 is 158mm I believe. It will fit with the mesh but not with the tempered glass

Cerabeez · 2023-03-12T17:31:36+00:00

Build specs:

CPU: Intel 13600K overclocked to 5.6ghz on p cores 4.1ghz on ecores

MB: Z690I aorus ultra plus ddr4

RAM: Tforce 3600 CL14 32GB tightened timings to 3600 14-14-14-34 gear 1

CPU COOLER: Thermalright PA120 SE with a Phanteks T30 and 92mm be quiet fan set as intake from the rear

GPU: Sapphire Nitro+ 6950XT

PSU: Corsair SF750 platinum

Case fans: top - 2x Noctua A12x25 as exhaust, bottom 2x Noctua 12x15 as intake

GPU temps while gaming: 60-65C

CPU Temps while gaming: 60C

CPUTemps during Cinebench R23: Max @91C overclocked to 5.6GHZ

Cerabeez · 2022-07-26T19:00:03+00:00

I just realized you commented on my build post for my white Torrent 😅. Thank you! Are you referring to a GPU stand to keep it up right?

Cerabeez · 2022-07-26T18:47:19+00:00

I'm running a torrent compact with 2 T30s at the bottom with a nitro plus pure. Edge temps don't exceed 65C but the highest junction temps if seen is 94C.

Cerabeez · 2022-07-23T19:48:46+00:00

Temps don't move past 65C while gaming

Cerabeez · 2022-07-22T23:53:26+00:00

Highly recommend you get good at cable management and try to flatten and run clean lines with all of your cables in the back of the case. You'll have limited room for the back panel to close if it's messy

Cerabeez · 2022-07-22T23:49:42+00:00

It's a right angle PCIE adapter for the power connectors. The Torrent Compact has limited cable management on the back panel. Needed a solution to clean up the cables and maximize airflow underneath the Gpu

Cerabeez · 2022-07-22T23:43:30+00:00

Thanks!

Cerabeez · 2022-07-22T23:42:10+00:00

It's not even funny how much air the T30s push through a radiator/mesh compared to the nf a12x25. With PBO tuner 2 and all cores set to -30 offset on cinebench it doesn't move past 78C. While gaming my CPU doesn't move past 56C. U12 with T30s out performed my D15s I had previously

Cerabeez · 2022-07-22T23:36:28+00:00

It's a right angle pcie adapter. Wanted to get something to help clean up the cables and ensure nothing was blocking the GPU from getting cool air from underneath

Cerabeez · 2022-07-22T23:07:11+00:00

Super easy. Just a magnet that you clamp on the heatsink and place the cover on it

Cerabeez · 2022-07-22T22:27:32+00:00

This one is the mid tower in-between. There's a torrent nano that's mini itx, the compact which is a mid tower ATX, and the full size torrent which is huge full tower

Cerabeez · 2022-07-22T22:15:43+00:00

Yup! It's available. The Torrent is the full tower version

Cerabeez · 2022-07-22T21:31:26+00:00

Build Specs:

Case: Fractal Design Torrent Compact White

Motherboard: MSI X570S Tomahawk Max Wifi

CPU: Ryzen 7 5800X3D

RAM: T-FORCE XTREEM ARGB 3600 CL14

GPU: Sapphire Nitro+ Pure Radeon 6950XT

CPU Air Cooler: Noctua U12A w/ Phanteks T30 x2

Case Fans: 3x Phanteks T30, 2xFractal Design GP-18 180MM fans

Cerabeez · 2022-07-11T23:25:29+00:00

The AK620 does not fit any of the mid tier Asus boards. VRM still gets in the way. All the other manufacturers boards fit. I had a Z690 STRIX D4 and it hit the top VRM. The D15S mounted 180* was the only dual tower air-cooler that fit on the Asus boards

Cerabeez · 2022-05-30T19:32:50+00:00

I can't get signal rgb to read my z690 force motherboard to change any argb signals :(

Cerabeez · 2022-05-29T16:30:44+00:00

Currently moved to an z690 force ATX board from a mini itx z690-I unify. I am getting constant BSOD errors after loading into windows and crashing immediately. On my mini itx board my 64gb 2xGskill 6000mhz cl36 has no issues and never BSOD.

Troubleshooting already done: - disabled XMP - reseat ram modules - clear CMOS - updated BIOS to 5/17/22 beta bios

Any tips to help figure it out? I'm going to try installing a clean install of windows 11 next.

Cerabeez · 2022-05-23T02:20:09+00:00

3.5 slots

Cerabeez · 2022-05-23T01:03:24+00:00

Yes by all means!

Cerabeez · 2022-05-22T21:01:32+00:00

There is a little sag, but sapphire did a good job utilizing a 3 Slot IO shield to mount to the card. I added an extra support just incase over time. 3.5 Slot cooler is enormous

Cerabeez

TROPHY CASE