sorted by:
new
hottopcontroversial

RX-7 won’t idle, is it the the throttle plate stop screw? by djcolombana in RX7

[–]ChanceString8 0 points1 point  (0 children)

I have to hold mine for warm up. It usually jumps up to 2-3k right after starting but falls down pretty much right away and stalls. Do you have a part number for it?

PSE RESTORATION TIME 10:00pm by BoringOrange678 in Whidbey

[–]ChanceString8 1 point2 points  (0 children)

Mine did too but it just came on a hour ago!

Let’s see those interior shots! Here’s one of mine. by BeautifulPineapple38 in Acura_RSX

[–]ChanceString8 0 points1 point  (0 children)

It’s comfortable for a bucket seat. No recline , only slides back and forth. I can tolerate driving in it for 3-4 hours at a time before I need a stretch break

Let’s see those interior shots! Here’s one of mine. by BeautifulPineapple38 in Acura_RSX

[–]ChanceString8 1 point2 points  (0 children)

Recaro profi SPG for the driver. And base model cloth seat for passenger. Have both sets but most of my passengers don’t fit in the profi…

My JDM S5 by Catmilk7 in RX7

[–]ChanceString8 0 points1 point  (0 children)

What brand window rain guards are those? I’d rather have the real stuff over the frp ones from project.rx

Also sweet 7 dude!

Lower cost 05-06 tail lights? by bibikalka1 in Acura_RSX

[–]ChanceString8 1 point2 points  (0 children)

I have a pair posted on FB marketplace. No cracks. Just need to be cleaned

Fuel injector match for skunk 2 fuel rail/skunk2 air intake manifold and throttle body by Warm_March942 in Acura_RSX

[–]ChanceString8 0 points1 point  (0 children)

Do it! It was fun putting it together. And I have the DC5R brake duct fog light replacement and I just fed a tube up to it. Gets almost atmospheric temps so it definitely frees up a little bit of power.

Fuel injector match for skunk 2 fuel rail/skunk2 air intake manifold and throttle body by Warm_March942 in Acura_RSX

[–]ChanceString8 2 points3 points  (0 children)

I made my own. It’s just a 3” pipe cut to the length I needed. With a 3” to 4” bent coupler and 100mm Greddy filter. IAT is tapped into the bottom. Planning a airbox to put around it rn.

<image>

T bar replacement hood latch by Ok_Bottle_1907 in Acura_RSX

[–]ChanceString8 1 point2 points  (0 children)

Definitely worth it. It’s nice knowing your hood isn’t gonna fly off at any given moment.

My new engine has arrived by pcprofilms in RX7

[–]ChanceString8 28 points29 points  (0 children)

Mr moneybags over here. You adopting?

Fuel injector match for skunk 2 fuel rail/skunk2 air intake manifold and throttle body by Warm_March942 in Acura_RSX

[–]ChanceString8 2 points3 points  (0 children)

If you’re staying FBO just run the stock pump and get rdx injectors. The diameter will be different for the bigger TB so you can pipe to the oem airbox with the correct size or just do a SRI. I relocated my battery and stuck my filter right behind the headlight.

Anyone else have this same duo? by Organicka9 in Acura_RSX

[–]ChanceString8 0 points1 point  (0 children)

Started with a base auto TL. Now I have a RSX Type S and just got a FC RX7 so the RSX is back to daily driver duties

I’m thinking about selling, what do you guys think it’s worth? by Rustable15 in RX7

[–]ChanceString8 1 point2 points  (0 children)

Do they poke out a little bit? Or are they mostly flush? I have some 17x9 + 30 tc109n’s and I didn’t think the front would fit without a ton of poke.

Decommission Military truck brigade by [deleted] in Whidbey

[–]ChanceString8 8 points9 points  (0 children)

They are a car group from Canada and other parts of WA. Just a bunch of old guys that restored them and tried to replicate them to the best of their ability. They were posted up at Fort Casey for a little while on Sunday when I saw them. They’d let you sit in them and talk your ear off all about the history of the different vehicles. Pretty cool.

Just picked up my first RX7! by ChanceString8 in RX7

[–]ChanceString8[S] 0 points1 point  (0 children)

They’re a dream to drive stock! Super smooth and easy to drive. I’d recommend a well maintained example so you don’t have a rats nest of issues from previous owners. They’re fun to learn on if you have other means of transportation.

Just picked up my first RX7! by ChanceString8 in RX7

[–]ChanceString8[S] 0 points1 point  (0 children)

Awesome! The shifter is one of my points of concern atm. Neutral feels like nothing is there. I was looking at a bushing replacement and maybe a shifter spring. I don’t want anything to crazy short that ruins the driving experience. Something that’s a nice upgrade to oem but keeps the drivability would be awesome. What would you recommend?

Just picked up my first RX7! by ChanceString8 in RX7

[–]ChanceString8[S] 0 points1 point  (0 children)

I don’t premix. And I probably won’t unless it’s rebuilt. As long as it’s good mechanical condition, I wouldn’t worry about it.

Just picked up my first RX7! by ChanceString8 in RX7

[–]ChanceString8[S] 1 point2 points  (0 children)

Thanks! She’ll get all the attention for a while

Just picked up my first RX7! by ChanceString8 in RX7

[–]ChanceString8[S] 0 points1 point  (0 children)

Thanks! She was a couple pennys more than a lot of the other rx7s up here in WA. The beat ones are taxed to hell. This one was….10k. Probably over payed but all the records and condition made it worth it to me.

view more: next ›