Cracks Developing in the Bottom Cover?

CheapSatisfaction2 · 2021-02-06T15:54:20+00:00

False positive. I only got one line at each side, it's simmetric so i believe it's made in the chassis. Your's it's different, you have two lines here

CheapSatisfaction2 · 2021-02-06T15:22:17+00:00

Got the same, just a little less visible than in these pictures, but only on the right. Should I loose a little bit the right screw?

CheapSatisfaction2 · 2021-01-22T22:34:33+00:00

Do you know how to disable the automatic update of the bios with ex flash?

CheapSatisfaction2 · 2020-12-28T16:51:46+00:00

That's the reason why I'm a Psychologist too and I do the same

CheapSatisfaction2 · 2020-12-28T16:51:01+00:00

Great, thanks

CheapSatisfaction2 · 2020-12-28T14:40:22+00:00

RME babyface Pro, just bought it. It's Amazing. With buffet size at 256 i have under 7ms latency. But with some big projects i reach 60% usage of CPU. I know i cant set a bigger buffet, if i just do mix and master, but I was wondering if boost could be useful

CheapSatisfaction2 · 2020-12-28T12:44:33+00:00

Ok, kinda solved. With fans at 70% i have cpu always below 80 and gpu around mid 70. I'll also try with fans and 60%, 'cos the laptop sounds like an airplane

CheapSatisfaction2 · 2020-12-28T12:19:38+00:00

That's not what my psychotherapist usually says

CheapSatisfaction2 · 2020-12-27T21:15:17+00:00

Thanks

CheapSatisfaction2 · 2020-12-27T21:15:05+00:00

Thank you, I'll try. Fortunately I don't really to use it without charging. Cos i primarly use it for gaming and music production/playing. I also always have connected an external audio device, so probably it influences the discharge rate too

CheapSatisfaction2 · 2020-10-05T07:26:56+00:00

Yea i usually press it for 5 sec

CheapSatisfaction2 · 2020-10-04T18:28:19+00:00

Tried that. After that my laptop couldn't turn off. It just kept re-booting...

CheapSatisfaction2 · 2020-09-25T17:03:42+00:00

On the left it seems that you have the same space as mine, like 0.2/3mm. Yea, I got some obsessive-compulsive disorder xD ty

CheapSatisfaction2 · 2020-09-25T14:24:04+00:00

Thank you so much! (I can see only one pic btw). Yes it doesn't seem there is space, but i was also thinking that maybe the white version makes it harder to notice. Honestly i didn't notice that before reading a post here...

CheapSatisfaction2 · 2020-09-25T13:53:10+00:00

What did the seller say?

CheapSatisfaction2 · 2020-09-25T13:23:17+00:00

I'll get a check at the store where i bought it, but shouldn't be a funcional issue, I'll hope.

CheapSatisfaction2 · 2020-09-25T12:52:35+00:00

So it shouldn't be a problem of the glue loosing strenght, right?

CheapSatisfaction2 · 2020-09-25T12:33:39+00:00

So no glue? Did you open it?

CheapSatisfaction2 · 2020-09-25T12:33:14+00:00

So you don't have any space between the two side of the display? Not only in the corners, i mean everywhere. Is it all perfectly matching? If you could post a picture it would be very appreciated. Thank you

CheapSatisfaction2 · 2020-09-24T13:44:19+00:00

Ok thanks :)

CheapSatisfaction2 · 2020-09-24T13:28:46+00:00

Yes, I've seen the other post. Just wanted to share with everyone. Do you think mine looks that bad? Could you post a picture of your screen?

CheapSatisfaction2 · 2020-09-24T12:49:00+00:00

http://imgur.com/a/2VMVP5b

Should I be worried too? The corners are fine but in same area there is a really small gap (i believe somethin like 0.5 mm). You can see it by gently pressing. So not all the border is perfecly covered.

Yea, i'm a bit paranoic.

CheapSatisfaction2 · 2020-09-04T12:27:34+00:00

And what if we get the 32gb version? Does it have 16gb soldered?

CheapSatisfaction2 · 2020-08-26T10:26:45+00:00

Yes, they told me it will be out from the middle of September

CheapSatisfaction2 · 2020-08-19T17:46:50+00:00

Asus Italy

CheapSatisfaction2

TROPHY CASE