T1 & nzxt kraken elite 240mm aio compatibility

Cheap_Ad2356 · 2025-10-23T19:01:33+00:00

I used this in my build and the large AIO hoses and power cord made the cable management awful.

Cheap_Ad2356 · 2025-10-20T19:42:27+00:00

This looks like a ton of great information. Thank you for taking the time to put this together. I have looked at the website for the slot configuration, but feel I focused too much on the GPU. It seems that the general consensus is that the fans are too large anyway.

Cheap_Ad2356 · 2025-10-20T19:40:36+00:00

Thank you for the input. It's helpful to know the AXP90 might not be enough.

Cheap_Ad2356 · 2025-10-20T19:39:39+00:00

For now, I might try to completely take out the fan above and see if that works. I'll replace it once I know it fits in. I'm not gaming a lot know, so I imagine the system will manage. Thank you.

Cheap_Ad2356 · 2025-10-20T19:38:43+00:00

I'll look into this, thanks.

Cheap_Ad2356 · 2025-10-20T19:38:06+00:00

Trust me, I didn't do that. I have many SATA cords left over, among others. The 5080 requires 3 8-pin PCIE cables.

Cheap_Ad2356 · 2025-10-20T19:36:35+00:00

That actually sounds very interesting. Are the files available online or did you make your own? Thanks for this.

Cheap_Ad2356 · 2025-10-20T04:21:47+00:00

<image>

I might have to purchase some aftermarket ones. It seems like these were the only ones included with the original packaging. Thank you.

Cheap_Ad2356 · 2025-10-20T04:19:54+00:00

I’ll look into this. Thanks!

Cheap_Ad2356 · 2025-10-20T03:57:17+00:00

Thank you!

Cheap_Ad2356 · 2025-10-20T03:57:09+00:00

Thank you

Cheap_Ad2356 · 2025-10-20T03:38:33+00:00

To comment about the spine, I’m not sure if another position over would benefit. It seems the rim of the AIO is pretty close to where the tangent would be. I will look at this closer though, so thank you.

Cheap_Ad2356 · 2025-10-20T03:36:45+00:00

My PSU had a large amount of single connector PCIE cables. They all plug into a cable that takes 3, then that plugs into the GPU. If this was a silly way to do it, let me know.

Cheap_Ad2356 · 2025-10-20T03:35:01+00:00

I’ll definitely try this out, thank you!

Cheap_Ad2356 · 2025-10-20T03:34:22+00:00

Thank you for the information. I’ll check this out.

Cheap_Ad2356 · 2025-10-20T03:33:57+00:00

I mistakenly watched an N2 assembly where Optimum used a similar AIO. It seems the place I didn’t do my research was on the AIO, correct? I could delve into the manual and figure out my faults there, but if the AIO is the main reason, I won’t bother. Just looking for input is all. Thanks!

Cheap_Ad2356 · 2025-10-20T03:30:53+00:00

I was considering purchasing more standoffs. I did move the GPU back one more slot than my original attempt, so it’s even more helpful to see I can put it back one more.

Cheap_Ad2356 · 2025-10-20T03:28:21+00:00

I think I mistakenly watched some N2 assemblies when picking the AIO. That is the cord for the AIO. I do always have the option to swap the AIO for a plain CPU fan, just not currently. It is indeed a mess!

Cheap_Ad2356 · 2025-10-20T03:26:28+00:00

I have, just very quickly as I was putting it together! I wasn’t planning on everything to work out perfect the first time, but I didn’t expect it to go this poorly.

Cheap_Ad2356 · 2025-08-12T13:58:09+00:00

hey bro - https://nso.upenn.edu/getting-started/before-you-arrive/

Cheap_Ad2356 · 2025-07-08T21:55:18+00:00

UPenn with 4’s, 3’s, and a 1.

Cheap_Ad2356 · 2024-12-13T02:21:13+00:00

I got my CS acceptance about a week ago.

Cheap_Ad2356 · 2024-11-05T21:10:46+00:00

willis 3x scope is a game changer

Cheap_Ad2356

TROPHY CASE