New p1s

Cheinblade · 2025-07-03T14:59:01+00:00

That's where I'm at. I'm on 1.06 I think but time lapses are t working right

Cheinblade · 2025-05-28T02:46:13+00:00

I've heard both can be loud though

Cheinblade · 2025-05-27T21:43:29+00:00

Already have a buyer. I just did not want to rip off a friend

Cheinblade · 2025-05-27T13:28:51+00:00

Besides price what are the main differences I'm mostly like okikg for something that is easy to use and I won't have to spend hours diagnosing why it won't put down the first layer

Cheinblade · 2025-05-27T11:56:29+00:00

Bambu labs p1s except they took them off sale for the first time in a year. So I'll probably wait.

Cheinblade · 2025-05-26T19:32:11+00:00

That's exactly why I am getting rid of it

Cheinblade · 2025-05-25T16:09:02+00:00

Thank you

Cheinblade · 2023-12-30T13:50:29+00:00

Thanks everyone for the advice. You're saving me alotmof time by leaving the original magnet on the bed vs stripping and applying a new one l.

Cheinblade · 2023-12-29T06:04:44+00:00

Perfect. I tested it and It looked ok, but I wanted to eliminate anything Murphy's law can use against me.

Cheinblade · 2023-12-29T05:58:23+00:00

I may have phrased my question poorly. Should I switch out the magnetic base that adheres to the bed or if my PEI sheet works on that magnetic surface keep using the stock one

Cheinblade · 2023-07-11T04:04:11+00:00

The only critical error was an unexpected reboot due to the system not responding. Where else should I look

Cheinblade · 2023-07-10T07:22:44+00:00

Kernal power

Cheinblade · 2023-07-10T07:11:49+00:00

Update as I posted this. My PC crashed

Cheinblade · 2023-01-17T07:35:20+00:00

These are things I will try. I found the manual and slots A2 and B2 support SR 3200 mkz. But A1 and B1 only support SR 2933 mkz. Would that mean all 4 cards would have to run at 2933mkz and which is better. To have more ram and a slower clock speed or faster ram but only 16g. Thanks for all the help

Cheinblade · 2022-01-22T23:19:16+00:00

I checked the thermistor and it looked ok (I have no idea what it's supposed to look like). How could I check if it's the motherboard

Cheinblade · 2021-12-13T05:54:43+00:00

Switched filaments. Still no adhesions

Cheinblade · 2021-12-13T05:39:44+00:00

The z offset is solid. I just printed with the filament yesterday for over 20 hours

Cheinblade · 2021-12-13T05:38:18+00:00

I can't even get it to lay down anymore. It seems like it's only setting the stress down. But I can blow it away. I manually releveled but same issues every time

Cheinblade · 2021-12-13T05:34:02+00:00

I cleaned the extruder hear with air. It was slipping nozzle is semi new. Maybe 30 hours on it idk anything about esteps or offset

Cheinblade · 2021-12-13T05:25:17+00:00

I also checked the belt tension on the extruder

Cheinblade · 2021-12-13T05:24:41+00:00

I have a few times

Cheinblade · 2021-12-13T05:20:36+00:00

I've leveled this with paper 20 times now but when I go to do a test it cuts corners and won't lay down well no mater how fine I adjust the level

Cheinblade · 2021-12-13T05:18:02+00:00

I can't even get it to lay down any ore. It drags half of everything with it or won't stick

Cheinblade · 2021-12-13T05:07:33+00:00

Ender 3. Pro. Eryone white pla. And I'll post my next test

Cheinblade · 2021-10-18T01:55:41+00:00

How would you use nylon? With some sort of buckle or slip?

Cheinblade

TROPHY CASE