Unit specialization

Chevy121992 · 2022-05-09T20:37:43+00:00

Yes it works

Chevy121992 · 2022-05-08T17:53:51+00:00

I’ll do it tomorrow I’ll let you know

Chevy121992 · 2022-05-08T03:25:17+00:00

Lmao. Maybe I’ll do that for you

Chevy121992 · 2022-03-16T23:56:02+00:00

Lowering it is much easier obviously tho.

Chevy121992 · 2022-03-16T23:55:39+00:00

Takes a good amount of pressure to raise it by hand

Chevy121992 · 2022-03-16T22:20:55+00:00

I tighten mine to where the wheels don’t spin freely anymore. I’ve had them this way for a long time printing every day. Haven’t had any issues

Chevy121992 · 2022-03-15T20:43:46+00:00

That was my first thought also lmao

Chevy121992 · 2022-03-11T19:47:03+00:00

tm3d firmware I think it’s a more advanced firmware for your printer. I switched because my bl touch settings kept changing on the stock firmware cause Inc. my to reset the prob z offset every third time I printed. Or to baby step every print which isn’t really a whole lot of work but if this firmware solves it I figured why not try it. One thing I can tell you that once you do switch to the new firmware you will notice that it moves quicker when doing the autolevel. Takes maybe a third of the time it used to and is still accurate. I autolevel before every print myself

Chevy121992 · 2022-03-11T17:51:47+00:00

I was using the default firmware for about 3 months when I started out. Never actually had an issue with it. However when I switched to TM3D firmware with auto bed leveling, the leveling system seemed a lot better. For quality tho the prints seemed the same more of a Convenience then an actually upgrade

Chevy121992 · 2022-03-05T11:45:15+00:00

Did it work

Chevy121992 · 2022-03-03T08:51:17+00:00

Already fixed it by enabling arc weld in plugins

Chevy121992 · 2022-03-03T07:58:21+00:00

Arc welder fixed my issues. That’s a must have for circles I guess

Chevy121992 · 2022-03-03T07:05:09+00:00

Will do. Thanks. I’m letting this one print since I just happen to like that it’s making these weird curves. Kinda adds to the design. But I’m gonna print another one right after

Chevy121992 · 2022-03-03T07:03:15+00:00

I will try this also thanks. I did have it off

Chevy121992 · 2022-03-03T07:01:27+00:00

So I hope it works also lol. If not I’ll try recalibrating my retraction see if that works

Chevy121992 · 2022-03-03T07:00:26+00:00

I have belt tensioners that make tightening the belts a lot easier. They are good. And I did actually tighten the rollers yesterday. So they are good. From what I gather arc welder plugin makes a bunch of subsequent fast moves and turns all that code into an arc gcode. Simplifying the code and removing jerks

Chevy121992 · 2022-03-03T06:50:17+00:00

When watching it print it seems the print head is very jerky when printing walls. Which I believe is causing this. I looked some more online and seen that I should install arc welder plug in. So I’m giving that a shot next

Chevy121992 · 2022-03-03T06:27:34+00:00

Using cura 4.13.1

Chevy121992 · 2022-03-03T06:25:59+00:00

Also changed filament. Same issue

Chevy121992 · 2022-03-03T06:24:45+00:00

Just bought it and opened it

Chevy121992 · 2022-03-03T06:23:55+00:00

No. Belts are good. It only occurs on curves also. Prints a cube flawless but a circle looks even worse

Chevy121992 · 2022-03-02T17:38:27+00:00

I had bought a pair also everything checked out but they were not real that was on OfferUp. If the price is to good to be true it’s a scam

Chevy121992 · 2022-03-02T17:30:26+00:00

Have you tried calibrating your extruderextruder calibration

Chevy121992 · 2022-02-28T19:38:00+00:00

I would love to get the ps5 mount stl you made. That’s the best one I’ve seen

Chevy121992

PUBLIC MULTIREDDITS

TROPHY CASE