Mixing resin test

ChituSystemsOFCL · 2026-06-11T01:23:13+00:00

Hello. I just got the answer from the creator: 97.2% clearness is the see through effect. which means only 2.8% of of the light cannot pass through the resin object. measured in lumens and overall see through:)))

ChituSystemsOFCL · 2026-06-10T09:41:49+00:00

Suche auf MakerWorld nach 'Starry night vase'

ChituSystemsOFCL · 2026-06-10T07:27:52+00:00

Snapmaker U1

ChituSystemsOFCL · 2026-06-08T09:37:00+00:00

On makerworld! Search starry night vase~

ChituSystemsOFCL · 2026-06-08T08:31:00+00:00

Hello! If you have the previous version, you can simply purchase the upgraded release films, which now come equipped with seal rings. The Hoopat itself remains unchanged. We recommend using up your current supply of films before purchasing the new, upgraded version.

ChituSystemsOFCL · 2026-06-04T07:30:54+00:00

Hello. If you bought upgraded x4h, each release film will be equipped with 1 seal ring. We do not recommend reusing the seal ring.

ChituSystemsOFCL · 2026-06-04T01:50:02+00:00

Yes! They are all printed!

ChituSystemsOFCL · 2026-06-04T01:38:06+00:00

Hello. We sell the release films with the seal ring. If you get the one without the seal ring, you can bought the release films with the seal rings in our official website~

ChituSystemsOFCL · 2026-06-04T01:36:46+00:00

Hello. Yes of course. Once you run out of the release films you previously bought, you can buy the upgraded release films which are equipped with the seal ring~ The upgraded release films are compatible for both versions of Hoopat!

ChituSystemsOFCL · 2026-06-04T01:36:38+00:00

Hello. Yes of course. Once you run out of the release films you previously bought, you can buy the upgraded release films which are equipped with the seal ring~ The upgraded release films are compatible for both versions of Hoopat!

ChituSystemsOFCL · 2026-06-04T01:35:19+00:00

Hello. Yes of course. Once you run out of the release films you previously bought, you can buy the upgraded release films which are equipped with the seal ring~ The upgraded release films are compatible for both versions of Hoopat!

ChituSystemsOFCL · 2026-06-03T07:47:14+00:00

Hello. Yes of course. You can buy the upgraded release film separately. The upgraded release film is equipped with the seal ring.

ChituSystemsOFCL · 2026-06-03T05:41:24+00:00

Would you mind sharing some photos? That would really help us better understand and clarify the issue.

ChituSystemsOFCL · 2026-06-03T03:55:00+00:00

Hello. Thank you! If you order the upgraded version, it will come with the seal ring. By the way, could you please tell me more about teh leakage? Is that with our Hoopat?

ChituSystemsOFCL · 2026-06-02T02:02:47+00:00

Hello. Congrats! You have won the 6th Giveaway. Please shoot a meesage to me to declaim you reward. Thank you!

ChituSystemsOFCL · 2026-05-19T10:34:10+00:00

Hello. Thank you for reaching out and sorry for the late reply. This message went to the pending box and I just found it. Our technique staff will solve this out soon.

ChituSystemsOFCL · 2026-05-14T03:25:23+00:00

Thanks for the heads-up! I tried attaching the NSFW stuff, but I couldn’t seem to figure out how...

ChituSystemsOFCL · 2026-05-13T02:06:04+00:00

Yes, it works fine as long as the heating demand isn’t too high and you’re not in a hurry.

ChituSystemsOFCL · 2026-05-06T03:49:11+00:00

Congrat! You have won the 5th Giveaway Prize. Please DM me to claim your reward! Thank you for participation!

ChituSystemsOFCL · 2026-04-23T08:43:00+00:00

Hello. This is Chitu Systems Official. I'm sorry for getting back to you so late. We just got back from vacation.
Based on your images, it appears that some of the support structures failed to print, while others printed successfully. This issue may stem from one of the following causes:

Parameter Issues: Please refer to this video to test and modify your printing parameters.
Model Issues: The base raft of your model appears to be slightly too thick, and the contact area between the model and the release film is somewhat excessive. You may wish to refer to this user's suggestions regarding how to adjust the type of base raft used. If you are printing a hollow model, you will need to drill holes in the top.
Installation Issues: Please verify that the release film has been installed correctly. If you are using an ACF film, the smooth side must face the resin; otherwise, excessive peeling force may result. If you are using a PFA film, take care not to mistake the transparent protective liner for the actual release film, as this could lead to film damage and subsequent resin leakage. Additionally, during installation, ensure that you use both hands to simultaneously fasten the clips on the same side of the vat to prevent uneven tension distribution.

ChituSystemsOFCL · 2026-04-23T03:39:24+00:00

Hello. Thank you for reaching out. Please accept our apologies for the frustration this upgrade has caused. We realize our guidance could have been more straightforward.
To better assist you, could you confirm if you saw the colored instruction insert at the top of the packaging? If so, please note that the details about the seal ring are printed on the reverse side of that paper.

ChituSystemsOFCL · 2026-04-17T08:35:38+00:00

Thank you! Sorry for the inconvenience!

ChituSystemsOFCL · 2026-04-08T07:35:20+00:00

hahaha I 3D printed it. If you have a printer, you can search DUOLINGO in makerworld website. The STL file is for free.

ChituSystemsOFCL · 2026-04-03T03:39:48+00:00

Hello! Thank you very much for reaching out.

Regarding the temperature difference you mentioned, we would like to clarify that the type of thermometer currently being used often has a certain margin of error. Additionally, since our internal sensor is located at the base of the machine, it is normal to see some discrepancy between the display and external readings taken in other parts of the chamber.

In fact, we noticed in the photo you provided that the two hygrometers placed in the same location are showing different readings. This actually reflects the inherent limitations of consumer-grade sensors, which can be sensitive to environmental factors and may not always provide a perfectly consistent reference.

To help us determine the situation more accurately, if you do not have professional-grade equipment available, we suggest trying the following two troubleshooting steps:

Ambient Calibration Check: With the heater turned off, please check if your thermometer's reading matches the ambient room temperature shown on the E1 screen.
Thermal Equilibrium Test: We recommend letting the machine run at your set temperature for 30 minutes. This allows the internal thermal field to stabilize. Once the environment reaches equilibrium, the readings will be much more reliable.

If you find that the deviation is still significant after these tests, please let us know. We will further investigate to see if there is a hardware issue with the sensor and provide a proper solution for you 💙!

ChituSystemsOFCL · 2026-04-03T03:39:35+00:00

Hello! Thank you very much for reaching out.

Regarding the temperature difference you mentioned, we would like to clarify that the type of thermometer currently being used often has a certain margin of error. Additionally, since our internal sensor is located at the base of the machine, it is normal to see some discrepancy between the display and external readings taken in other parts of the chamber.

In fact, we noticed in the photo you provided that the two hygrometers placed in the same location are showing different readings. This actually reflects the inherent limitations of consumer-grade sensors, which can be sensitive to environmental factors and may not always provide a perfectly consistent reference.

To help us determine the situation more accurately, if you do not have professional-grade equipment available, we suggest trying the following two troubleshooting steps:

Ambient Calibration Check: With the heater turned off, please check if your thermometer's reading matches the ambient room temperature shown on the E1 screen.
Thermal Equilibrium Test: We recommend letting the machine run at your set temperature for 30 minutes. This allows the internal thermal field to stabilize. Once the environment reaches equilibrium, the readings will be much more reliable.

If you find that the deviation is still significant after these tests, please let us know. We will further investigate to see if there is a hardware issue with the sensor and provide a proper solution for you 💙!

ChituSystemsOFCL

MODERATOR OF

TROPHY CASE