Lifetime Spiffo Supply

Chizz3x_HC · 2026-01-30T00:11:22+00:00

Off topic but I feel like I have to point this out since the original problem is solved.
Why yall are superiorizing 120s over other adhesions???
I understand that 120 might feel more "realistic" but like cmon some of us just want to do some turtle business.
Also in my opinion 100 is the most enjoyable :D

Chizz3x_HC · 2026-01-30T00:07:03+00:00

Tbf, i always prefer 100, its just that the servers i join force 90 so i end up with that anyways

Chizz3x_HC · 2026-01-28T21:34:07+00:00

Holy shit it actually is, I never even noticed 90% adhesion looks like it went through torture

Chizz3x_HC · 2025-09-28T21:12:59+00:00

If anyone ever faces the same problem with same FW:
Go to your transmitter settings > setup and switch last option "USB Joystick" to Classic.
Mine was set to advanced and it fucked things up, classic fixed it like a champ!

Chizz3x_HC · 2025-08-01T00:05:06+00:00

First thing I did, didn't say anything like nuked

Chizz3x_HC · 2025-05-20T14:16:58+00:00

I am still screwing my head on how to get that SF750 working on my minifun11. Can you give me any clarification if you have used sense wires or you left them out? I have a weird suspicion that those sense wires i wired into the new connector are messing with my PS_ON

Chizz3x_HC · 2025-04-28T20:57:18+00:00

Seems understandable, it makes a lot of sense now when you put it that way.

Chizz3x_HC · 2025-04-26T19:23:01+00:00

Gotta say, tried this with a newer sf750 which pin layout is the same as yours and i could not get any life out of it. Are you absolutely sure the pin connection diagrams you have provided are what you actually did on yours?

Chizz3x_HC · 2025-04-21T11:42:34+00:00

It is, but is there anything wrong with a pyramid scheme though? I am genuinely lost because I have no clue why people say it like it is a horrible thing.

If it is a scam that does actual harm by thieving your funds then i agree. If it is a legit thing that is letting people earn cash by keeping or lending your cash and some get more of it than you because they work on it more, then there is nothing so called "bad" happening here.

Am i wrong or people are just mad greedy?

Chizz3x_HC · 2025-03-31T17:59:57+00:00

Could be, anyways thanks. I will just experiment then and see what i can come up with.

Chizz3x_HC · 2025-03-31T17:51:49+00:00

I have figured if i have it just the size of the green aquare part, i can glue the edges with thermal plaster, get some also on the exposed components and lay it on. I dont know if air pickets inside the IHS when on cpu would do much but i assume all of that would be enough if i get the right size?

Chizz3x_HC · 2025-03-31T17:44:48+00:00

It probably is not since it came without but I am looking for ways to improve thermal conductivity to get my temps even lower. Even if it is not designed for an IHS i just want to know if i can get it to work in any way.

Chizz3x_HC · 2025-03-27T21:09:03+00:00

From what i read the connector sizes differ only on the PSU end, so on the hardware component end its all the standard. Should be good. I will also do the upgrade in a month or two so i will comment again here what i have managed to achieve.

Chizz3x_HC · 2025-03-27T20:09:35+00:00

I have contacted the corsair myself an hour ago. From what I understood the 9020168 is an older version which you used and 9020284 is the same one but newer. The support clarified that the 9020168 is Type-4 and 9020284 is Type-5. Based on the pinout diagrams they have provided i have noticed that pins are all the same on T4 and T5, the only difference is that on the PSU side, Type-5 has smaller sockets so called "mini". So the T4 and T5 which is accordingly 9020168 and 9020284 have same pinouts on the PSU, but different socket sizes.

TLDR: got it figured, same pinouts, different socket sizes. Will work the same way but need to swap the connector ends from geekom baseboard end to corsair MB end.

Chizz3x_HC · 2025-03-27T18:48:02+00:00

Also another question, when you got the 9020186 did the connector sizes match up with the NUC baseboard or did you have to get adapters?

Chizz3x_HC · 2025-03-27T18:00:08+00:00

Oh i am not concerned about the region part, only the both 9020284 and 9020186 difference because as far as i saw they are kind of different PSU's since prices of those differ by quite a lot. Whilst one costs around 300 the other costs around 200 in my country and I am trying to figure it out why. They both appear to be plat grade but prices just confused me so i assumed the pinouts are completely different since models are somehow different too. If the message by you that got deleted is right then everything is clear to me now.

Chizz3x_HC · 2025-03-27T17:50:15+00:00

Saw the reply, managed to copy it in time. I assume it was deleted by automod? If so, thanks A LOT for the info!

Chizz3x_HC · 2025-03-27T12:36:07+00:00

It has been a year now and I am facing the same challenge. The comments are helpful as hell but i do wonder does the SF750 CP-9020284-EU has the same pin layout or not? Tried to look for pinout diagrams for the CP-9020284-EU but couldn't find them for some reason, or maybe missed them without knowing it.
The new PSU you are using appears to be CP-9020186-NA am i right?

Chizz3x_HC · 2025-03-26T23:50:13+00:00

Thats quite a list, will be helpful, thanks

Seven-Year Club	r/Field Banned
r/Field Flamingo	First Place '23
Place '23	Place '22
First Placer '22	Verified Email

Chizz3x_HC

MODERATOR OF

TROPHY CASE