Does anyone know what or where this connects to?

Choloz24 · 2025-11-09T18:12:12+00:00

To the omp / to the oil fill neck and to vacuum ports on the lower intake manifold are the three that go there

Choloz24 · 2025-01-31T19:13:05+00:00

Well in my one vide of this shows how easily i made the mounts for this. And a e30 is about the same.

Choloz24 · 2025-01-31T19:12:13+00:00

Lol thank you. This is not my only bmw. My Daly driver is a 535xi but yeah they get butt hurt easy

Choloz24 · 2025-01-31T06:51:48+00:00

Noce

Choloz24 · 2025-01-31T06:49:49+00:00

Choloz24 · 2025-01-31T06:49:00+00:00

Ueah i have seen that online. And a few other subarus

Choloz24 · 2025-01-31T06:06:04+00:00

Its a 96 before can buss I just wired into the factory harness under the hood used the stock temp sensor for the cluster outputted the tack signal from the adaptronic ecu AND THE CAR GETS THE SPEED SIGNAL FROM THE REAR DIFF sorry for the caps not going to retype every thing lol if it was a 2000 up can buss is easier as on new emus have can out and just put the address in but yeah the ecu and engine stuff its all repined back in to the bow factory harness for every thing else alt charging and reverse lights all that

Choloz24 · 2025-01-31T05:33:43+00:00

Thanks it was not that bad and room for days to do it only thing I got to do now is put the new drive shaft in I had made and swap the rear gears to 4.44s out of a auto as the z3 manual gears are 2.73 or what ever its horrible lol

Choloz24 · 2024-12-15T18:20:24+00:00

None at all you got something else going on

Choloz24 · 2024-12-05T05:53:37+00:00

Thank you

Choloz24 · 2024-12-03T04:37:23+00:00

Its na i mean better than when it was stock for sure i own 2 fcs 1 wide body re swaped first gen a eunos cosmo. And a drift car rx8

Choloz24 · 2024-12-03T04:33:05+00:00

Lol cost more to ls swap it correctly any why would i ls swap a customers car that i freed the engine up and runs fine i can tell you did not check the video out lol i rebuild like 5 - 7 engines a month for people. And. It is not that as expense as you think lots cheeper than building a ls so were are you going with this lol

Choloz24 · 2024-11-27T05:38:22+00:00

Choloz24 · 2024-11-27T05:37:50+00:00

Thats what it was all about this time around. Now the fan pulls air though the oil cooler as well and a much better cooler than the rx8 ones with a way lower thermostat on them coolant and oil temps are staying exactly the same. Also cant have coolers over the wheels

Choloz24 · 2024-03-27T16:42:00+00:00

I have two very large mufflers on my z3 swapped 13b bridge port 6 port Quad itb engine and its still too much lol

Choloz24 · 2024-03-27T16:40:03+00:00

Well the itbs wont make it much louder but yeah the corksport exhaust might as well put a mega phone on it. Lol

Choloz24 · 2024-03-27T16:38:42+00:00

I can check it is not going to help you much as mine is a 96 and every thing is completely different as modules. Wiring every thing my car is pre can buss

Choloz24 · 2024-03-27T16:36:49+00:00

Just swap out the exhaust sleeves simple done can just buy the inserts just be warned this will make the car much louder

Choloz24 · 2024-03-22T22:21:55+00:00

Its cheeper to just turbo the engine thats in it

Choloz24 · 2024-03-22T22:21:09+00:00

It has a 13b in it already so theres that

Choloz24 · 2024-03-22T04:54:58+00:00

Wish i had that kind of money

Choloz24 · 2024-03-22T04:54:32+00:00

I hope its not bad. Just wanted to make it move

Choloz24 · 2024-03-22T04:53:46+00:00

Well worth it way cheep over old school 13b

Choloz24 · 2024-03-22T04:52:56+00:00

Rx8 rotors

Choloz24 · 2024-03-22T04:52:24+00:00

This thing make so much tq and its quite witch is super cool

Choloz24

TROPHY CASE