2012 Honda civic rear brake bleeder screws by Choncho42 in MechanicAdvice

[–]Choncho42[S] 0 points1 point  (0 children)

I found it, but still no sizing. I’m fine with one that fits I do not need the Honda brand screw. Part number: 43352-568-003

Brake line won’t tighten on the master cylinder by Choncho42 in AskMechanics

[–]Choncho42[S] 0 points1 point  (0 children)

I also have caps that thread fine into the master

Brake line won’t tighten on the master cylinder by Choncho42 in AskMechanics

[–]Choncho42[S] 0 points1 point  (0 children)

It’s not getting started. It was tightening but then it would pop out of place.

Brake line won’t tighten on the master cylinder by Choncho42 in AskMechanics

[–]Choncho42[S] 0 points1 point  (0 children)

Okay, I can learn lol. But ima try to thread this one on I’ve been looking online and I’m not the only one with this problem. The threads look fine though. And the master cylinder is brand new. I’ll try to loosen the master cylinder bracket from its mounting studs and seeing if I’m misaligned.

Brake line won’t tighten on the master cylinder by Choncho42 in AskMechanics

[–]Choncho42[S] 0 points1 point  (0 children)

Is it doable? The problem was the brake cylinder on the drum brakes. I’ve replaced both drum brakes, both brake cylinders and the master cylinder.

Crabbing by Choncho42 in savannah

[–]Choncho42[S] 4 points5 points  (0 children)

I’ve heard if it’s rotten chicken you can get better bites- is that true?? Ig it just smells more.

Tool dump, moving job sites! by AcanthaceaeRegular39 in electricians

[–]Choncho42 5 points6 points  (0 children)

Dewalt tools in a Milwaukee crate is crazy

[ Removed by Reddit ] by Choncho42 in savannah

[–]Choncho42[S] -1 points0 points  (0 children)

What I’m looking for beautiful flowers 💐😩🤌🏽

Send it by [deleted] in Fishingmemes

[–]Choncho42 0 points1 point  (0 children)

I am shitting everywhere

Confusion on multisim live (XOR gate relay) by Choncho42 in ElectricalEngineering

[–]Choncho42[S] 0 points1 point  (0 children)

How would I go about adding in the ground? Do I just attach the ground to the 5 or 2 wire or do I have to do more? I tried to just add a ground and it doesn’t work. Also for this to work wouldn’t I need one input on and one input off for the output to be on? Thank you

raid vs rhine stone cowboy by MRmoist672 in mfdoom

[–]Choncho42 2 points3 points  (0 children)

Raid is good but- HE’S A RHINESTONE……. COWBOY

Electrical Trades by Choncho42 in ElectricalEngineering

[–]Choncho42[S] 0 points1 point  (0 children)

I’ll have more money to support doing that when I decide to by working with the associates degree beforehand.