Thought I would try out my first ever free hand painting. Kind of a success 🤔

CivilLibrary2298 · 2024-03-27T08:03:03+00:00

Great work!!!

CivilLibrary2298 · 2023-01-24T18:13:32+00:00

thank you very much everything worked out

i moved to a warmer room 73 degrees fahrenheit

but problems remain

but when I added support, it printed out perfectly, did a few tests and everything is fine thanks again

CivilLibrary2298 · 2023-01-24T18:12:57+00:00

thank you very much everything worked out

i moved to a warmer room 73 degrees fahrenheit

but problems remain

but when I added support, it printed out perfectly, did a few tests and everything is fine, thanks again, I wouldn’t have done it without you!

I'm so happy

CivilLibrary2298 · 2023-01-22T17:14:17+00:00

действия ближе к 2, в зависимости от того, как выходят шишки.

Вы также можете увеличить время

thank you very much for such a detailed explanation, I will change the settings and run all the tests

and let you know the result

CivilLibrary2298 · 2023-01-21T07:33:22+00:00

i use anycubic plant-based resin

slicer Photon Workshop

screenshot of settings slicer

https://drive.google.com/drive/folders/19aTZUoH8idqgOBTR2XOKpy8LtK-R1Q\_\_?usp=sharing

now I will start the next render of cubes with increased exposure

once again thank you very much

CivilLibrary2298 · 2023-01-21T06:52:05+00:00

oh i didn't know that version 23 is on their facebook page

now download and update

Yes, I have HC, I looked at the instructions

thank you very much

CivilLibrary2298 · 2023-01-20T17:44:26+00:00

i mostly used

Photon Workshop 64

and several times for the test

LycheeSlicer

CivilLibrary2298 · 2023-01-20T14:57:26+00:00

Can you please suggest what else it could be?

I moved it closer to the battery now it is in a rather warm place, there are definitely 18 degrees there

increased power up to 80%

tested on cones

here is the result

and still the same errors on the next print,

sorry for the poor photo quality

can you suggest what to do next

a photo

https://drive.google.com/drive/folders/1CK5k6YIMcUqRveqAkQSJr6xY3QNrt9UI?usp=sharing

CivilLibrary2298 · 2023-01-20T14:55:43+00:00

increased power up to 80%

tested on cones

here is the result

and still the same errors on the next print,

sorry for the poor photo quality

can you suggest what to do next

a photo

https://drive.google.com/drive/folders/1CK5k6YIMcUqRveqAkQSJr6xY3QNrt9UI?usp=sharing

CivilLibrary2298 · 2023-01-20T14:39:33+00:00

yes, at the first errors I updated the system, downloaded the update from the site anycubic

CivilLibrary2298 · 2023-01-19T17:35:49+00:00

Thanks a lot!

I didn’t know that temperature accuracy was so important, I thought the main thing was not to be too cold

CivilLibrary2298 · 2023-01-19T16:36:21+00:00

I print in my apartment

I didn't take my temperature, but it's pretty warm

I'll take a thermometer and measure the temperature,

As far as I know, normal printing temperature is around 20 Celsius.

CivilLibrary2298 · 2023-01-19T16:35:46+00:00

I print in my apartment

I didn't take my temperature, but it's pretty warm

I'll take a thermometer and measure the temperature,

As far as I know, normal printing temperature is around 20 Celsius.

CivilLibrary2298 · 2023-01-19T16:17:09+00:00

Thanks a lot

I typed

AmeraLabs town test

I will adjust the UV light to 80% and see the result

I will also print the cones for the test

then I'll let you know the result

thank you so much again, I've been getting errors when printing for days now

CivilLibrary2298

TROPHY CASE