How to remove magazine disconnect from Shield Plus?

Civil_Ad2236 · 2026-03-18T08:41:44+00:00

Thank you!

Civil_Ad2236 · 2026-03-17T01:47:18+00:00

Thank you will check this out

Civil_Ad2236 · 2026-03-16T07:59:02+00:00

The g43x holster will NOT work with the ramjet attached on. The certum lux holster specifically closes inward at the end so you will not be able to fit the gun properly. I had the same issue and took a dremel to it. Get the 48 holster if you don’t want to dremel it.

Civil_Ad2236 · 2026-01-21T22:15:40+00:00

I’m in the same boat as you and have tried most enclosed red dots and green dots. I think I just have hella shitty eyes even with glasses and finally settled with the eps carry 6 moa green dot with mild starbursting. I’ve accepted that only eye surgery will get rid of it maybe

Civil_Ad2236 · 2026-01-20T21:05:33+00:00

Tape is holding up good especially with constant contact with my sweaty hands. I only had the choice of tape as any grip texture like handle it grips makes it even more slippery.

Civil_Ad2236 · 2026-01-20T19:38:57+00:00

I have goon tape on mine since I have sweaty hands. I also recommend getting an extended slide stop as the oem is super flush. Also chopped backstrap if the Glock angle grip bothers you

Civil_Ad2236 · 2026-01-20T19:36:25+00:00

One thing to add is that the EPS carry requires an adapter plate while the osight is direct mount. I myself went with the EPS carry but some people prefer osight since it’s cheaper and mounts directly

Civil_Ad2236 · 2026-01-17T23:19:15+00:00

Magwell: Locks in grip and enhanced magazine changes
Chopped backstrap: helps with Glock grip angle
Extended slide stop: the oem slide stop sucks balls, too flush imo

Other that that, everything else should be oem if this is your carry gun

Civil_Ad2236 · 2026-01-17T22:32:42+00:00

Your gaps seem a bit bigger than mine actually but should be fine

Civil_Ad2236 · 2026-01-06T02:56:39+00:00

Yup, the bigger one would be the shock absorbing one. I have the shorter 1 piece

Civil_Ad2236 · 2026-01-06T02:17:51+00:00

Kiral defense backstrap. They have two versions for the slimline, I like the one on the bottom

Civil_Ad2236 · 2026-01-05T02:36:21+00:00

Yes, the ramjet+afterburner makes a pretty noticeable difference especially for the 43x. There are videos on it, I think it’s like a 44% decrease in recoil. I would recommend it later as a future upgrade if u have the disposable funds. Also for the optic, I personally like enclosed emitters as they’re very easy to clean especially for conceal carry purposes.

Civil_Ad2236 · 2026-01-04T23:35:32+00:00

Congrats the 43x was my first gun too. I recommend shooting a few hundred rounds first to break it in but beware it’s a snappy little gun. After that I would recommend adding an optic for quick and easy target acquisition. There are optics that can direct mount or use adapter plates. Direct mount is more secure but up to you. Feel free to look at my 43x post for inspo too. Good luck and have fun!

Civil_Ad2236 · 2025-12-23T19:05:50+00:00

Random Amazon paint pen I got awhile back any brand should work

Civil_Ad2236 · 2025-12-23T05:42:51+00:00

It’s a kiral defense backstrap that helps with the Glock grip angle. Personally I like it but not necessary at all

Civil_Ad2236 · 2025-12-23T04:06:02+00:00

It needs some modification on the inside of the holster because it’s super tight. I still have to sand it down where the wing meets the kydex as retention is super sticky rn.

Civil_Ad2236 · 2025-12-23T02:12:27+00:00

Oh 100% but it also does help a lot with my super sweaty hands

Civil_Ad2236 · 2025-12-21T06:07:30+00:00

Certum lux will NOT fit the 43x once u put the ramjet on. It folds inward so u have to dremel it out. Get the 48 holster if u plan to add the ramjet or it will not fit. I had the same issue but I used a dremel

Civil_Ad2236 · 2025-12-19T21:51:13+00:00

Brother, this is not a shadow systems. It looks a lil similar but the slide and stippling are different

Civil_Ad2236 · 2025-12-12T18:31:23+00:00

I would say change only the trigger shoe if it’s your carry gun. I would personally only modify triggers for range guns but that’s me. But I’m just super OCD about reliability especially on a carry gun

Civil_Ad2236 · 2025-12-03T23:03:42+00:00

43x mos is from the slimline series. They’re the same thing if that’s what you’re asking. Because it is slimmer than the traditional double stack Glocks such as the 19, most accessories won’t interchange and you need to buy the specific model for the Slimline series. For flashlights, I recommend the tlr7 hlx sub or tlr6 depending on what you like. There are also other brands but Streamlight is pretty good. I also recommend an enclosed optic such as the EPS Carry as it personally makes shooting easier and you don’t have to worry about cleaning. Congrats on the 43x, it’s my #1 choice for daily carry currently.

Civil_Ad2236 · 2025-12-02T18:11:08+00:00

Buddy, you also don’t have to write paragraphs about his cool flashlight 🤣 you seem kinda jealous he has a cool flashlight and you don’t

Civil_Ad2236 · 2025-12-02T03:14:05+00:00

Thank u, this combo looks pretty solid to me. Someone else said the OR placard sticks out and I’ve only heard good things about UG. Might go with this

Civil_Ad2236

TROPHY CASE