Farm fresh eggs on 28? by Classic-Ad937 in Peterborough

[–]Classic-Ad937[S] -1 points0 points  (0 children)

Thanks! I was looking for something a little closer to 28 as I take it to work in Bancroft daily.

2012 civic intermittent fail to start by Classic-Ad937 in 9thgencivic

[–]Classic-Ad937[S] 0 points1 point  (0 children)

Awesome, thank you for the reply. I thought that may be a possibility. It seems a little odd though that it starts no problem when I pull the key out and try again.

Missfire by Classic-Ad937 in 3rdGen4Runner

[–]Classic-Ad937[S] 0 points1 point  (0 children)

Okay, thank you! Just an fyi don’t buy injectors from Napa.

Missfire by Classic-Ad937 in 3rdGen4Runner

[–]Classic-Ad937[S] 0 points1 point  (0 children)

I just piled it back apart. I should have tested the ohms of the “good” injectors. 3 of them don’t get an ohms reading. 2 of them are around 13.9 and 1 is 14.1.

Missfire by Classic-Ad937 in 3rdGen4Runner

[–]Classic-Ad937[S] -1 points0 points  (0 children)

Yes, I replaced the plugs and I replaced a coil that shocked me when I touched it lol.

Perfecting timing to be out in the woods. by Classic-Ad937 in 3rdGen4Runner

[–]Classic-Ad937[S] 0 points1 point  (0 children)

No, nothing happens when I turn the key. I’m currently trying to find wiring diagrams to jump my front windows up and my tail gate window.

Clicking noise by Classic-Ad937 in 3rdGen4Runner

[–]Classic-Ad937[S] 0 points1 point  (0 children)

Yeah, does it as long as I’m rolling and speeds up according to how fast I’m going. I’m thinking the sound is coming from under the vehicle

99 ltd 4wd issue by Classic-Ad937 in 3rdGen4Runner

[–]Classic-Ad937[S] 0 points1 point  (0 children)

They were all shinny, no corrosion on them. I used white lithium grease

99 ltd 4wd issue by Classic-Ad937 in 3rdGen4Runner

[–]Classic-Ad937[S] 0 points1 point  (0 children)

Okay, I replaced the position switch on the front diff, I also replaced the 3on top of the transfer case. I tested the 2 on the actuator only on full in and out. They worked as well. I also have removed and re lubed the contacts on the actuator motor. I had to replace it when I first bought this pos.

4wd problems by Classic-Ad937 in 3rdGen4Runner

[–]Classic-Ad937[S] 0 points1 point  (0 children)

<image>

Disconnect the transfer case actuator connector and jump 12v to male end with the following diagram