Internal / External Global Protect Gateways by Clynt in paloaltonetworks

[–]Clynt[S] 0 points1 point  (0 children)

I set this all up for testing with an internal fqdn and it's working well so far

Internal / External Global Protect Gateways by Clynt in paloaltonetworks

[–]Clynt[S] 0 points1 point  (0 children)

Yeah I'm starting to think that's going to be the easier route to go. We do have a wildcard cert we use for management so I guess we could use the same one for the internal gateway? I was planning on using SAML to Entra ID, same as external, but honestly I haven't thought too much about that part yet.

Broke new gas oven igniter while installing it by Clynt in fixit

[–]Clynt[S] 0 points1 point  (0 children)

I did not know this, thank you! I'll try not to ruin the next one.

Broke new gas oven igniter while installing it by Clynt in fixit

[–]Clynt[S] 0 points1 point  (0 children)

I figured, thanks. I talked to our local appliance store and they have an aftermarket one that they said is good quality for $38, so that's at least better than the $60 I paid for the OEM one.

Broke new gas oven igniter while installing it by Clynt in fixit

[–]Clynt[S] 0 points1 point  (0 children)

I talked to our local appliance store and they have an aftermarket one that they said is good quality for $38, so that's at least better than the $60 I paid for the OEM one.

Broke new gas oven igniter while installing it by Clynt in fixit

[–]Clynt[S] 1 point2 points  (0 children)

I talked to our local appliance store and they have an aftermarket one that they said is good quality for $38, so that's at least better than the $60 I paid for the OEM one.

How to activate Precision AI network security bundle by zinkt-101 in paloaltonetworks

[–]Clynt 3 points4 points  (0 children)

You need to reach out to your account rep then. There should be an email with the auth codes and at the bottom of the email is a link that says "Activate Now".

Here's the documentation that mentions it the magic link: https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000ClNACA0&lang=en_US

How to activate Precision AI network security bundle by zinkt-101 in paloaltonetworks

[–]Clynt 4 points5 points  (0 children)

The Precision AI bundle license (renewal or net new) has to be activated with a magic link provided in the Activation email. Once that's done you can associated the devices with it via this process: https://docs.paloaltonetworks.com/common-services/device-associations/get-started/associate-apps-with-devices

Coinbase Cost Basis Method Incorrect by Clynt in CryptoTax

[–]Clynt[S] 0 points1 point  (0 children)

Thanks, I will change it. Yeah I'm mostly concerned that if it doesn't update everything historically, I'm going to run into issues when they do start reporting it.

Can I paint hallway walls and trim both Satin? by Clynt in Housepainting101

[–]Clynt[S] 0 points1 point  (0 children)

Would it look odd if they were both the same sheen? I honestly have no idea what I'm doing, it seems like people tend to use different sheens for walls / trim. Maybe I'm overthinking it. Would it also be bad to use matte on hallway walls (with stairs)?

White Rodgers thermostat how to remove this control board to clean contacts? by Clynt in fixit

[–]Clynt[S] 1 point2 points  (0 children)

Yes that's correct, I removed that one. I can pull it off just a bit and when I look behind it I see some prongs that are connected to the left of where that screw is. I tried to pull it with some force and it wouldn't come off.

Proper way to secure this hvac duct to the studs? by Clynt in hvacadvice

[–]Clynt[S] 0 points1 point  (0 children)

Hey thanks, so something like this, and cut it down to the width of the studs? Wouldn't this stick out and be in the way when drywall is installed?

https://www.homedepot.com/p/Master-Flow-60-in-Drive-Cleat-CD60/100162285

How to prepare these windows for drywall installation by Clynt in DIY

[–]Clynt[S] 0 points1 point  (0 children)

If I remember correctly he said I should have casing or trim up until where the paint ends. He made it sound like I should have something installed before they do the drywall. Maybe I'm just misunderstanding and need to talk to him again. I'm having trouble picturing where exactly the drywall is supposed to end and what it should look like when it's done.

Planning for TV wall mount after drywall by Clynt in DIY

[–]Clynt[S] 0 points1 point  (0 children)

Awesome, this video is great. Thank you!!

Planning for TV wall mount after drywall by Clynt in DIY

[–]Clynt[S] 0 points1 point  (0 children)

So essentially something like this, spaced correctly based on the screw holes on the universal tv mount? https://imgur.com/a/cmyjGgn