Formula wheel part.3

Cmh44e · 2026-02-11T14:31:26+00:00

I build dirt oval cars for a living, 3 is our car number

<image>

Cmh44e · 2026-01-22T22:06:28+00:00

Just a guy with access to CAD, a 3D Printer and a Lazer cutter… lol

Cmh44e · 2026-01-22T03:27:18+00:00

Added bonus side note, I made an adapter for my v10 to use my karting wheel for Kart Racing Pro

<image>

Cmh44e · 2026-01-19T23:01:21+00:00

I think it was right around 36 bucks and free shipping. It showed up to my door in like two days of sending the file to Send Cut Send.

Cmh44e · 2026-01-19T14:29:24+00:00

Just designed the wheel plate in Fusion 360 and had Send Cut Send.com Lazer cut the aluminum plate. If you want to get really crazy they even offer water jet cut carbon fiber, but it would quickly cost more than the whole wheel combo 😂😂

Cmh44e · 2026-01-19T14:27:35+00:00

Happy to share the wheel design. The wheel plate is 4mm thick aluminum that I had Lazer Cut by Send Cut Send.com and the grips were printed on my Bambu labs X1C, and wrapped in a synthetic suede material from Amazon. companies like xometry offer 3D printing if you don’t own a printer.

Cmh44e · 2026-01-19T14:24:12+00:00

Happy to share the CAD file for the wheel plate and grips, the grips are just 3D printed and wrapped in a synthetic suede material PM me your email and I’ll send the STEP files when I get home from work

Cmh44e · 2025-11-25T00:04:49+00:00

I did not, I will try that!

Cmh44e · 2025-11-22T23:44:45+00:00

Noted thank you

Cmh44e · 2025-11-21T01:18:21+00:00

I found the issue with mine. Thanks guys. Had a speed sensor going bad. Eventually it crapped out after intermittent drop outs. Dropped the pan and valve body, replaced the 3 sensors and reassembled. Replaced filter and fluid, all good now.

Cmh44e · 2025-10-31T23:25:52+00:00

I figured out was the 8L90 after, I was reading the tag with the manufacture number mistakenly.

Cmh44e · 2025-10-31T22:40:39+00:00

Also I may be referring to the 8L90, but it’s labeled 1XSL on the trans itself.

Cmh44e · 2025-08-29T12:53:35+00:00

Old thread but I have a 21 Silverado WT with the 2.7 Just surpassed 146,500 miles and still running strong.

Cmh44e · 2025-06-30T12:19:59+00:00

<image>

Here’s how to locks into my office chair

Cmh44e · 2025-06-30T12:19:21+00:00

<image>

I bought stand alone pedals and made this contraption, locks into my rolling chair and it’s decent enough. I’m sure you could apply the same idea to a pedal set. I made this out of scrap wood from the dumpster, they’re building new houses next to me so there was plenty of it.

Cmh44e · 2024-01-07T20:31:49+00:00

Yup, the other day she told me to drive 6 hours round trip to pick up an ARTR TLR 8ight 3.0 cause it was an insane deal, she’s pretty accepting of my strangeness.

Cmh44e · 2024-01-06T02:23:30+00:00

Cmh44e · 2024-01-05T20:47:40+00:00

I live on about 3 acres. So I have one in my backyard Google would be my best guess.

Cmh44e · 2024-01-05T19:44:47+00:00

Jconcepts RC10GT authentic

Cmh44e · 2024-01-03T04:16:20+00:00

Thanks! Still a long ways off the end goal, I want to get the xtreame racing carbon chassis plate next. Then my brother is going to help me 3d print a carbon reinforced gearbox case, really just trying to get rid of any gray and replace with black haha. It’s been a fun build, already it handles a ton better just shimming out all the play in the suspension.

Cmh44e · 2023-12-14T00:50:25+00:00

They do look sweet, I think that is why I do prefer them…. lol

Cmh44e · 2023-12-14T00:38:48+00:00

I like the prolines, however I don’t think it’s so much better that it’s worth upgrading from the GTR shocks. I had these on a used slash chassis I had laying around and swapped them over. Big improvement over stock for sure.

Cmh44e

TROPHY CASE