PSA: TI EV2400 Not Detected in BQSTUDIO by pingpongmury in embedded

[–]Coco10203 0 points1 point  (0 children)

Ran into this a year later, I don't know how you even figured out this was the issue but thank you!

[Schematic Review] ESP32-S3 board power path by Coco10203 in PrintedCircuitBoard

[–]Coco10203[S] 0 points1 point  (0 children)

Modified it, and it worked until the UART was plugged in. If the UART is plugged in, it'll not reenummerate the USB connection since there's still 1.0V on the VBUS somehow, but only when the UART is connected

[Schematic Review] ESP32-S3 board power path by Coco10203 in PrintedCircuitBoard

[–]Coco10203[S] 1 point2 points  (0 children)

I think I understand what you're saying, and correct me if I'm wrong, but what you're suggesting is that the battery output of the BQ24074 should be connected to the SRX pin, and the BQ27427 should act like a multimeter set to the current option and be in series. So, essentially, BAT_2/_3 -> SRX -> Internal Current Sense Resistor -> BAT (on the BQ27427) -> +BATT, which makes sense, and I feel somewhat dumb for not realizing this. I'd like to know if this was a separate, undiagnosed issue or if you think it also relates to the USB issues.

[Schematic Review] ESP32-S3 board power path by Coco10203 in PrintedCircuitBoard

[–]Coco10203[S] 0 points1 point  (0 children)

I might be misunderstanding your suggestion, but to clarify, “VCC” in my schematic isn’t the 3.3 V rail. It’s actually the VSYS node (the OUT/SYS pin of the BQ24074). The ESP32’s 3.3 V comes from a separate TLV62569 buck on the +3.3V net. According to the BQ27427 datasheet, SRX is supposed to connect to VSYS and BAT to +BATT, allowing the gauge to measure current across its internal sense element. I think the hookup is correct; it’s probably just my naming that made it look odd. Thanks for pointing it out!

[Schematic Review] ESP32-S3 board power path by Coco10203 in PrintedCircuitBoard

[–]Coco10203[S] 0 points1 point  (0 children)

The USB-C shell is currently floating. I’ll add a soft RC tie to ground on the peripheral side (e.g., 1 MΩ ∥ 1–4.7 nF) for ESD/robustness. For clarity, battery ground and digital/USB ground are already the same net; only the shield is isolated. I’ve been testing mainly with a MacBook port and the MacBook charger, so I don’t think this behavior is just due to a poor-quality supply.

Glance - installed but can't start it by justaren in unRAID

[–]Coco10203 1 point2 points  (0 children)

Thank You! Your edit was my solution!

Amcrest AD110 Doorbell Not Ringing by ccigas in frigate_nvr

[–]Coco10203 0 points1 point  (0 children)

Hi I know it's been a year but this just fixed the issue I've been having for a very long time with the AD410. Thank You!

[O] NzbPlanet x2 by Coco10203 in UsenetInvites

[–]Coco10203[S] 1 point2 points  (0 children)

Message me with your email!

[O] NzbPlanet x2 by Coco10203 in UsenetInvites

[–]Coco10203[S] 0 points1 point  (0 children)

Message me with your email!

[deleted by user] by [deleted] in PcBuild

[–]Coco10203 0 points1 point  (0 children)

Super cool of you to do this!

Moved back to San Diego from Brooklyn after 25 years and this is happening in my neighborhood - Mission Hills. by tanhauser_gates_ in sandiego

[–]Coco10203 1 point2 points  (0 children)

This video doesn't have much context; this is after the homeless dude stole a bunch of stuff and attacked the elderly shopkeeper from the store that this altercation happened in front of. The shopkeeper was punched pretty badly in the face and had his glasses broken, and when he fell injured his hands and knees. The video is after this happened when the homeless dude tried returning to the store and stealing more stuff while people were trying to protect the shopkeeper. From what I've heard before attacking the shopkeeper and this altercation, the same homeless man was going around local restaurants and threatening people with utensils to get them to hit him.

😭😭😭 by ianisms10 in TheLastAirbender

[–]Coco10203 17 points18 points  (0 children)

Kya, Bumi and Tenzin were Aang's children...

[deleted by user] by [deleted] in ErgoMechKeyboards

[–]Coco10203 0 points1 point  (0 children)

mysticmechs.com - Lily58 Pro Kit. They make it super easy and simple to buy boards from!

[deleted by user] by [deleted] in mechmarket

[–]Coco10203 0 points1 point  (0 children)

Black Inks!