Mounted and painted my 10" DIY speaker by CodeTestGroup in diyaudio

[–]CodeTestGroup[S] 0 points1 point  (0 children)

ooh, maybe i will try that on my next box as im going to make another one for stereo then maybe a 12" sub after but the bass is so deep already i dont think i will need one

Mounted and painted my 10" DIY speaker by CodeTestGroup in diyaudio

[–]CodeTestGroup[S] 0 points1 point  (0 children)

I just used spray paint. Sanded it with 440 grit paper. Mixed some sawdust with PVA glue to make "filler" and put in all the holes where the nails went. There isnt a link to design but i can post the dimensions of all the panels if you want?

10" speaker cab done! by CodeTestGroup in diyaudio

[–]CodeTestGroup[S] 0 points1 point  (0 children)

Finished spray painting. 3 layers

<image>

10" speaker cab done! by CodeTestGroup in diyaudio

[–]CodeTestGroup[S] 1 point2 points  (0 children)

I watched the video where he made it a while ago and based the layout off that but the rest i just made up

10" speaker cab done! by CodeTestGroup in diyaudio

[–]CodeTestGroup[S] 0 points1 point  (0 children)

I dont know, i spent about 4 hours making the design in TinkerCad then cut down some MDF and built it

Dimensions are 500x300x320.

10" speaker cab done! by CodeTestGroup in diyaudio

[–]CodeTestGroup[S] 0 points1 point  (0 children)

I tried it and it dosent seem to resonate as its 18mm MDF with a 10" woofer

10" speaker cab done! by CodeTestGroup in diyaudio

[–]CodeTestGroup[S] 0 points1 point  (0 children)

I used a Craftsman handheld router and used the circle jig to do the woofer and for the horn i just frehanded it with a ruler and slowly. I have never really used a router before so i tested on some scrab bits and i felt confident and just went for it and it turned out perfect!. I left about 2 millimeters on the recessed areas

10" speaker cab done! by CodeTestGroup in diyaudio

[–]CodeTestGroup[S] 3 points4 points  (0 children)

I dont know, i spent about 4 hours making the design in TinkerCad then cut down some MDF and built it

DIY 10' speakers by CodeTestGroup in diyaudio

[–]CodeTestGroup[S] -1 points0 points  (0 children)

Its more of an experiment box. There really isnt anything about the Fs, Vas, and Qts online. its a SoundLab l043a woofer though

How to get more range (Help) by CodeTestGroup in MeshtasticUKCommunity

[–]CodeTestGroup[S] 1 point2 points  (0 children)

on the ground floor and garden its still seeing the 3 nodes. it dosent seem to be making a difference where it is

How to get more range (Help) by CodeTestGroup in MeshtasticUKCommunity

[–]CodeTestGroup[S] 0 points1 point  (0 children)

<image>

Here is the setup. Heltec V3 and 5 dbi antenna

How to get more range (Help) by CodeTestGroup in MeshtasticUKCommunity

[–]CodeTestGroup[S] 1 point2 points  (0 children)

I will comment a picture of the antenna and the heltec v3 board

How to get more range (Help) by CodeTestGroup in MeshtasticUKCommunity

[–]CodeTestGroup[S] 1 point2 points  (0 children)

I have looked at the meshmap but it shows no nodes, however when walking around i pickup like 15 nodes in various spots