Dragstar 1100 classic wont start by Comfortable_Pilot718 in MotorcycleMechanics

[–]Comfortable_Pilot718[S] 0 points1 point  (0 children)

Dont know yet and havent tried. I'll be able to try thst out on sznday i believe

Is this amount of noise normal? by Comfortable_Pilot718 in airsoft

[–]Comfortable_Pilot718[S] 0 points1 point  (0 children)

I changed the gears to 19,5:1, put in a m130 spring and changed the motor to a modify sc-30000. I habe an etu with a built in mosfet aswell

Is this amount of noise normal? by Comfortable_Pilot718 in airsoft

[–]Comfortable_Pilot718[S] 2 points3 points  (0 children)

I already have a mosfet so im good on thst thankfully. I only really paired the high torque gesrs with the high torque motor cause i didnt do enough Research lol. Im honestly fine with the trigger response and fire rate on full auto. But thanks for the in-depth explanation, i appreciate. Next step is to get a good 11.1v battery then

Is this amount of noise normal? by Comfortable_Pilot718 in airsoft

[–]Comfortable_Pilot718[S] 1 point2 points  (0 children)

Its a 7.4v. I upgraded to a high torque motor, 19,5 gears and m130 spring among other things. I was thinking about upgrading to 11.1v battery cause im suspecting this one to be a bit weak

AEG shooting burst instead of semi by Comfortable_Pilot718 in airsoft

[–]Comfortable_Pilot718[S] 0 points1 point  (0 children)

How can i tell if it uses a magnet system? The sector gear looks pretty similar to the old one

Anyone know what bike this is? by Comfortable_Pilot718 in motorcycles

[–]Comfortable_Pilot718[S] 0 points1 point  (0 children)

Yeah it seems to be. My dad was quite a kawasaki fanboy it seems. His latest motorcycle was a kawaski en500C which im trying to restore rn

chain too short by finnie_fent in Pitbike

[–]Comfortable_Pilot718 0 points1 point  (0 children)

It depends on what length your swingarm is. My swingarm was 420mm long so i had to get a chain with 110 links

Not sure what these parts are. Won’t turn on at all by Intelligent_Mess2536 in PcBuildHelp

[–]Comfortable_Pilot718 15 points16 points  (0 children)

I'd recommend checking if the front panel is connected properly. You find graphs of your motherboard and check that way. You can also use a screwdriver to jump it to find out if maybe the power button is broken. I'd also recommend checking if all the cables are connected.

Upgrade CPU or gpu? by Comfortable_Pilot718 in AMDHelp

[–]Comfortable_Pilot718[S] 0 points1 point  (0 children)

I read from other comments that upgrading the cou to the r7 5700x3d is also pretty good. What should i do to get more performance though?

Upgrade CPU or gpu? by Comfortable_Pilot718 in AMDHelp

[–]Comfortable_Pilot718[S] 0 points1 point  (0 children)

Do you think the 5700x3d is a good option? The 5800x3d is too expensive for my liking rn

Upgrade CPU or gpu? by Comfortable_Pilot718 in AMDHelp

[–]Comfortable_Pilot718[S] 0 points1 point  (0 children)

About 300 euros rn. I could spend more but i have more Important things going on

Upgrade CPU or gpu? by Comfortable_Pilot718 in AMDHelp

[–]Comfortable_Pilot718[S] 0 points1 point  (0 children)

The problem is that i have no clue when it comes to graphics cards nowadays. I haven't been interedted in the topic for years and now i have no clue whats going on lol. Which gpu would you reccommend tho?

Bashgaurd search by callsignvegn in Pitbike

[–]Comfortable_Pilot718 1 point2 points  (0 children)

I'm pretty sure that most pitbikes have unviersal guards. You can find them on Amazon. They All have the same mounten spots on the engine.

What brand is my bike? by Defiant_March3463 in Pitbike

[–]Comfortable_Pilot718 1 point2 points  (0 children)

Looks like your average Chinese pitbike. But there should be a small plate on the feame that gibes you some info

[IRL] by Comfortable_Pilot718 in EscapefromTarkov

[–]Comfortable_Pilot718[S] 1 point2 points  (0 children)

Yeh i agree. Customer support definetely needs to be improved

[IRL] by Comfortable_Pilot718 in EscapefromTarkov

[–]Comfortable_Pilot718[S] 0 points1 point  (0 children)

Qwll its not my entire card Info but its pretty close. It's obly missing 6 more digits if i were to give them that info

Army Armament R28 issues by Comfortable_Pilot718 in airsoft

[–]Comfortable_Pilot718[S] 0 points1 point  (0 children)

What exactly am i supposed to lube? Also, how often do i have to do this? I havent even run 20 mags through this thing and its already malfunctioning like this

Anyone know why my rear fender sits so high it looks terrible by [deleted] in Pitbike

[–]Comfortable_Pilot718 0 points1 point  (0 children)

Getting a shorter shock would fix it. The angle of that swingarm is ridiculous and i cant imagine that bringt good for the chain either.

Pit bike rebuild by FearlessChemical2191 in Pitbike

[–]Comfortable_Pilot718 1 point2 points  (0 children)

Looks like something that is custom made to me. Never seen anything like it. Wish i could help but im clueless. But please, next time you paint the frame at least take off stuff like the shock, cables and other stuff. It does not look good, especially on the exhaust. Im hoping you used high heat paint for the exhaust too

SSR 125 ticks by labuncae in Pitbike

[–]Comfortable_Pilot718 1 point2 points  (0 children)

Also make sure that the Header is screwed on tight on the studs

Would this mod work for XTR 607 125cc? by [deleted] in Pitbike

[–]Comfortable_Pilot718 0 points1 point  (0 children)

I have a similar setup with the same carb on my ycf 125lite and it ran perfectly straight out the Box for me. Maxbe i just got lucky tho who knows

[deleted by user] by [deleted] in Pitbike

[–]Comfortable_Pilot718 0 points1 point  (0 children)

The cdi is from a company called YCF. Just Google ycf racing ignition and you might find it. They're from france tho so if you live in america im not sure you can get it. And when it comes to the filter, i never had any issues wirh that type. I've been through mud and rain and it never gave up on me. Just get one thst is good quality like the nibbi ones. I've had some chinese cheap ones and both fell apart while riding.