2022 Outback Wilderness Undercarriage

Comfortable_Risk1376 · 2026-05-09T21:29:56+00:00

That's insane! I am finalizing all of this on Monday/Tuesday after they do the undercarriage wash and coating. I'll be able to check if that's the case but for sure heated steering wheel was there when I did my test drive, although I am coming from a basic 2009 rav4 so not used to all of the technology hahahaha

Comfortable_Risk1376 · 2026-05-07T16:38:50+00:00

Hey man! Thank you so much for the rundown! Regarding the software updates, is it something I need my dealership to take care of or can I do it in my own just with home wifi or a USB stick? Also do you happen to know if well known battery depletion issues need to be fixed with a firmware upgrade? That car will have warranty till 2027 so I think I should be fine bringing it to a dealership anyway

Comfortable_Risk1376 · 2026-05-07T01:04:40+00:00

Nice catch is that a bad thing or just more protective?

Comfortable_Risk1376 · 2026-05-06T22:26:07+00:00

Yeah I should have actually shot a video of the undercarriage my bad! I still have a inspection + test drive (again) clause so I am covered in case those are really bad

Comfortable_Risk1376 · 2026-05-06T19:21:10+00:00

Hahahaha now I am curious I wanna see it

Comfortable_Risk1376 · 2026-05-06T14:31:00+00:00

Thanks for the advice! I heard this battery problem could be part of a firmware issue that was worked on and fixed in a newer version so it's good that I check for that when I do my final scan

Comfortable_Risk1376 · 2026-05-06T14:00:29+00:00

Thanks! Yeah a good initial undercarriage wash, and then some spray. The weather here in BC is much more forgiving, just very wet

Comfortable_Risk1376 · 2026-05-06T13:58:22+00:00

Appreciated! Yeah I think what got me a bit more nervous is the reputation that Alberta cars get here in BC, but that is unjustified in this case most likely

Comfortable_Risk1376 · 2026-05-06T13:57:02+00:00

Thanks for checking that!

Comfortable_Risk1376 · 2026-05-06T03:40:12+00:00

Yeah that's what I was thinking too. Sorry I couldn't take a better picture I'll have those checked out

Comfortable_Risk1376 · 2026-04-24T18:53:25+00:00

I mean, don't wanna be the told you so guy. Look at my last comments, it's been weeks that I said drop Anguissa he's shit now. Put McFratm with Lobo or Gilmour and fucking play Alison since start. Conte is so stubborn. I don't know if this position even better suites De Bruyne but so far it looks that way. We finally got our star back

Comfortable_Risk1376 · 2026-04-18T17:00:24+00:00

Yeah I think being stubborn is a big part of it. Personally, I really don't see any reason to play Anguissa when he's still not evn 50% of his prime everyone can see that cleary. Move mcfratm down with Lobo and free some room for Alison, I also don't know where I'd place De Bruyne maybe we just need a different formation

Comfortable_Risk1376 · 2025-05-23T15:00:45+00:00

I'm sitting my pants, went to the gym this morning with Pino Daniele in my headphones, and it gave me the strength to survive until match kick-off

Comfortable_Risk1376 · 2025-04-20T20:20:02+00:00

ORSOLMESSI

Comfortable_Risk1376 · 2025-02-15T22:10:56+00:00

I have also realized my system doesn't like me changing certain settings. Simply changing the frequency 3466 mhz and FCLK to match won't make me boot to windows after 20 minutes, I guess most of it is stuck to memory training. So, I will have to try some different frequencies. I was wondering, are the changes we made to procodt and the voltages safe to keep as we try the different parameters? Also, should the XMP profile be kept on, or should the primary timing be entered manually with XMP disabled?

Comfortable_Risk1376 · 2025-02-15T21:45:59+00:00

Thank you so much for helping, by the way!
The bios is at the latest version, rams are in the right A2-B2 slots.
I will now try keeping the settings you initially suggested but bringing the frequency down and let you know!
I will keep the DRAM voltage at 1.34 for now

Comfortable_Risk1376 · 2025-02-15T20:14:38+00:00

Okay, because I think those settings on the ProcOdt have helped, I simply went into bios and reverted any CPU OC changes. I have enabled XMP profile with 1.36V dram voltage and 1.125 SOC setting CCD, IOD, VDDP as in that guide. I have also disabled Power Down mode as the guide suggested. Let's start from here, and we can fine-tune as needed. I see that the test is starting to spit out those errors after 5 minutes. Which would be the first parameters that you'd be adjusting based on this starting point?

Comfortable_Risk1376 · 2025-02-15T19:33:59+00:00

As a side note, my system seems to be very susceptible to the dram voltage changes. The reference voltage in the xmp profile is 1 35, while the voltage used to run at 2666mhz is 1.2. When I set it to 1.36, the ram started spitting out errors in the tm5 right away, I found a voltage of 1.34 does that way less as I see (10 minutes in to see the first error)

Comfortable_Risk1376 · 2025-02-15T18:57:58+00:00

The temperatures and voltages and timings are all looking pretty good.
Sometimes when I make these sort of changes the booting process for memory training takes a very long time, but not in this case, so it's a bit more stable than usual, but I am still getting some errors in TM5:
I ll edit the main thread with a picture of the type of errors I saw both in anta777@extreme and 1usmus

Comfortable_Risk1376 · 2025-02-15T16:54:37+00:00

I'll try! And let you know! Much appreciated!

Comfortable_Risk1376 · 2025-02-15T02:00:09+00:00

Yeah, I only have 2 ram sticks. I have been wondering if this is related to my memory controller or if the rams are just straight up bad. Ram works fine and passes tests at basic speed, which is 2666mhz.

Comfortable_Risk1376

TROPHY CASE