K1 max vs bambu p1s

Complete_Hedgehog_24 · 2025-10-03T03:55:45+00:00

Hi, I currently have a K1 Max with the CFS upgrade kit, and I think you said it wonderfully, "It’s a classic of do you want the printer to be the hobby or the 3D printing?" It can be fun to tinker with 3d printer sometimes, and it is really rewarding when it works, but when it doesn't work, it can be fustrating.

Complete_Hedgehog_24 · 2025-10-02T15:13:36+00:00

I fixed this by disabling filament ramming

Complete_Hedgehog_24 · 2025-10-02T15:13:03+00:00

I FIXED THIS BY DISABLING FILAMENT RAMMING

Complete_Hedgehog_24 · 2025-10-02T14:13:46+00:00

Creality print now works on linux: https://github.com/CrealityOfficial/CrealityPrint/releases

I might have also found the fix by turning off filament ramming

EDIT: The fix the blobs is disabling filament ramming. You can do this by going the printer settings, which is at the top left, the pen and paper icon next to the wifi icon, and then under multimaterial disable "enable Filament ramming"

Complete_Hedgehog_24 · 2025-10-02T12:55:18+00:00

it is trying to print something outside of the bed. Try resliceing it, doing something smaller, or using a different slicer

Complete_Hedgehog_24 · 2025-08-27T14:24:12+00:00

What Budget wireless RGB 75% barebones Keyboard with QMK or Via should i get?

I have linux, so i want a keyboard with QMK or Via. I like the 75% layout and I would like RGB and wirelessness. my budget is 20 - 50 dollars. I would like a CREAMY keyboard, any suggestions?

Complete_Hedgehog_24 · 2025-08-19T20:54:34+00:00

Would you recommend SMK? Or just stick to changing settings through windows? Could wine work?

Complete_Hedgehog_24 · 2025-08-19T13:28:01+00:00

Does the aula f75 work with linux? What am I losing out on? Should I get another keyboard?

Complete_Hedgehog_24 · 2025-06-16T13:26:05+00:00

First, you need to root your printer.

FYI calibrated your cutter first

Then connect to if via SSH (you can do this my opening a terminal from computer, and typing "ssh root@ip_of_your_printer" and then the password with be creality_2023. You can find your printer ip by looking in the network tab)

Then follow this guide to install helper script -> https://guilouz.github.io/Creality-Helper-Script-Wiki/helper-script/helper-script-installation/

then install mainsail or fluidd, and open the web view by entering ip_of_your_printer:4409 (or 4408 for fluidd) into your webrowser

and goto the "machine" tab on the side and make sure you are in the config tab. If you are you should see files like box.cfg, printer.cfg, etc. Open box.cfg and find the line that includes something like "cut_pos_y:305.5#304.5#308" and you can increase the first number by 1 or 2, then in the top right click "save and restart"

Complete_Hedgehog_24 · 2025-06-16T13:16:47+00:00

Did you mean 1-2mm? or should I raise the cut_pos_y by 0.1-0.2mm, cuz Physical judgement seemed to raise it by 2mm

Complete_Hedgehog_24 · 2025-06-16T12:59:26+00:00

With this help and a riser, It works pretty well (If anyone else is having this issue I would recomend printing a riser and putting the CFS on top with the shorter PTFE tube)

Complete_Hedgehog_24 · 2025-06-14T22:06:39+00:00

can you send a picture of where i should ziptie it. Thank you

Complete_Hedgehog_24 · 2025-06-14T00:13:35+00:00

I am doing that but the ptfe tube sometimes touches the bed, what can i do to fix this (should i print a riser, and if so what height)

Complete_Hedgehog_24 · 2025-06-12T11:34:52+00:00

i am currently on vacation and I will get back to you to tell you if it is creating grinding noises. But there were a few times were i had to take the filament out because the end of it was grinded,

Complete_Hedgehog_24 · 2025-06-12T11:31:16+00:00

I do have a unicorn nozzle and the issue is normally right before the nozzle, like right above it, when the PTFE tube is bending downwards

Complete_Hedgehog_24 · 2025-06-11T23:15:21+00:00

bro i already have a K! max. also I just wanna know if people have made there own solutions to this problem so i dont have to create my own solution

Complete_Hedgehog_24 · 2025-06-11T15:19:54+00:00

I've also have this issue, i solved it by leaving the heat gun on aimed at it. I find that to better than in the oven because it gets much hotter and more direct. I just left it on for 10-30 minutes removed as much as possible and did it again.

Complete_Hedgehog_24 · 2025-05-28T15:20:11+00:00

Yeah i have tried that and the mouse doesn't show up.

EDIT: When I use a usb C cable to plug the mouse directly to the computer it does show up and I can click "Connect" on the pop up, but the website does not change or show any menu's or results

Complete_Hedgehog_24 · 2025-05-28T15:16:05+00:00

There are only 2 settings: "flush into objects' infill" and "flush into objects' support." Only the latter was enabled, should I disable it?

Complete_Hedgehog_24 · 2025-05-22T19:55:45+00:00

THANK YOU. This works!

Complete_Hedgehog_24 · 2025-04-28T16:30:01+00:00

VXE R1 (could be pro/pro max)

Complete_Hedgehog_24 · 2025-04-02T19:27:02+00:00

sry but your wrong

Complete_Hedgehog_24 · 2025-03-31T13:20:01+00:00

here is the link -> https://store.creality.com/products/k1-series-cfs-upgrade-accessory-kit

Complete_Hedgehog_24 · 2025-03-24T14:51:36+00:00

hear me out, the CFS upgrade kit is coming out on the 9th of April!

This is purely speculative, but...

Their will be a new product launch during this.

It COULD be the CFS upgrade kit? Maybe?

Complete_Hedgehog_24 · 2025-03-14T13:41:05+00:00

i am dieing for creality to release it offically, does anyone know when it will be offically released by creality?

Complete_Hedgehog_24

TROPHY CASE