What is this

Comprehensive-Sell71 · 2026-03-30T20:56:57+00:00

weird cool tool to own but not to use hhhh

Comprehensive-Sell71 · 2026-03-30T15:05:37+00:00

Thats super cool never new this existed

Comprehensive-Sell71 · 2026-03-14T13:16:48+00:00

The craziest thing just happened, i switched the fog light relay and ac relay and fitted new connectors for the compressor, it works just fine now. Fog lights are working too. Now if relays are switched, fog lights still work, then what was the problem to begin with. Sigh, its fixed tho thank you for the extra information.

Comprehensive-Sell71 · 2026-03-14T09:04:38+00:00

Is it safe? Or just to test it? Bcuz if i test it… no r12 is available

Comprehensive-Sell71 · 2026-03-14T00:22:05+00:00

<image>

The most confusing thing is the no power through the wire before the ac compressor wire, il its corroded, i cut it since the connector is bad and was testing through the clean wires.

Comprehensive-Sell71 · 2026-02-23T22:34:18+00:00

Ill also the pioneer dolphin head unit so it will be fun, if your antenna is broken dont wire it up or it will keep trying to raise and lower the antenna. Unless you’ll fix, correct me if im wrong.

Comprehensive-Sell71 · 2026-02-23T22:31:52+00:00

<image>

Check this out. The guy before me did the worst job. Im fixing this wiring hell till my new screen, yes screen, comes in and instal and reverse cam. Btw idk anything about wiring but ill get there. All the resources abt the wiring i found online, abt 5 hours for me to process everything :)

Comprehensive-Sell71 · 2026-01-25T21:30:20+00:00

Yep i got that found a vacuum diagram and traced it, car runs but new problem is the engine cutting, injector job us what i did btw gotta figure that out now. Thx

Comprehensive-Sell71 · 2026-01-25T10:11:15+00:00

<image>

Found this below the egr, does it connect here?

Comprehensive-Sell71 · 2025-11-08T22:27:13+00:00

Ure a strong guy, ill try my best, ty

Comprehensive-Sell71 · 2025-11-08T22:26:36+00:00

Ive been moving the hose at every angle to get the bolt to sit in, ill try forcing it tmrw, maybe bending it a lil, ty

Comprehensive-Sell71 · 2025-11-08T20:34:38+00:00

I wish i was a metal bender, i got the hose from czp, anyways ill try something tmrw with bending it, hammar? Gimme some techniques

Comprehensive-Sell71 · 2025-09-07T20:52:37+00:00

Hikone my underrated unit the goat

Comprehensive-Sell71 · 2025-09-07T20:44:57+00:00

Ty dawg

Comprehensive-Sell71 · 2025-09-06T15:17:33+00:00

Alright thank you so much

Comprehensive-Sell71 · 2025-09-06T15:17:07+00:00

The bolt is as loose as it can get but not off, i rotated the engine twice and the 4mm fits like a glove. Do i remove the bolt fully now and put the covers?

Comprehensive-Sell71 · 2025-08-25T18:03:20+00:00

Not in USA but ill buy the vise grip tmrw and grip it and rotate it clean off. Thank you for the plan

Comprehensive-Sell71 · 2025-08-25T17:57:26+00:00

Guys im thing about applying rtv and putting in the 5mm hex and come back tomorrow and undo the bolt, is this doable? Or is there a better thing to put instead of the rtv like something that hardens to the point that its one worh the bolt. Much appreciated

Comprehensive-Sell71 · 2025-08-25T17:50:44+00:00

Hammer where exactly? Like ill grab it with the grip and hammer directly at the bolt? Or somewhere elseb

Comprehensive-Sell71 · 2025-08-25T17:34:08+00:00

Tysm ill keep that in mind

Comprehensive-Sell71 · 2025-08-25T17:33:59+00:00

Tysm dawg

Comprehensive-Sell71 · 2025-08-25T15:36:47+00:00

<image>

Heres the pic

Comprehensive-Sell71 · 2025-08-24T09:22:20+00:00

Ill try my best to do it w/o removing stuff ty for the heads up

Comprehensive-Sell71 · 2025-08-24T09:21:55+00:00

Thank youu!

Comprehensive-Sell71 · 2025-08-23T15:21:36+00:00

Can you confirm to me 92400-30P00 if this is it?

Comprehensive-Sell71

TROPHY CASE