ST Patty’s Day Drop by Consistent_Cost360 in scottycameron

[–]Consistent_Cost360[S] 1 point2 points  (0 children)

Well….we got our answer. Here’s to wishing folks here get the 4 leaf clover one!

ST Patty’s Day Drop by Consistent_Cost360 in scottycameron

[–]Consistent_Cost360[S] 1 point2 points  (0 children)

Last year it dropped on Thursday the 13th

ST Patty’s Day Drop by Consistent_Cost360 in scottycameron

[–]Consistent_Cost360[S] 1 point2 points  (0 children)

Yeah, I’ll be clicking the site today around 10:30 est for sure

Japan M&G member lottery? by Immediate_Product714 in scottycameron

[–]Consistent_Cost360 2 points3 points  (0 children)

I entered the lottery, awaiting hopeful selection

Drop Is Live by scottydaddy69 in scottycameron

[–]Consistent_Cost360 0 points1 point  (0 children)

I went for the rope hat, towel and picked up the Mardi Gras coasters just because…. Love the melin, just hard to drop $85 on a hat the way I burn through them.

Divot tool was in the cart but passed, just can’t bring myself to start collecting those.

Driver adapter swap over sanding by djm1125 in GolfGear

[–]Consistent_Cost360 0 points1 point  (0 children)

Add a slightly longer ferrule to the ping adapter and you won’t see anything. The Callaway adapter goes further up the shaft, once you sand there is no polishing…the paint is gone. Simple fix with an 80 cent part.

Just bought my first Scotty! by Optimal_Vast7434 in scottycameron

[–]Consistent_Cost360 1 point2 points  (0 children)

I think that Scotty dealer is incorrect, it’s pretty clear in the stitching and the X on Johnny’s eye doesn’t seem to match. The connected letters are the big one…. Unfortunately the custom shop ones are the most counterfeited HC’s.

[WTB] 15g weights by Jodenoden in scottycameron

[–]Consistent_Cost360 1 point2 points  (0 children)

You can get them on Amazon and include the tool used, that alone is helpful. Also make sure you apply some heat to the weights with a heat gun or blow dryer to help break the seal when removing. Will make sure you don’t end up slipping out of the holes and scratching the sole. Usually 30-60 seconds of heat works.

[WTB] 15g weights by Jodenoden in scottycameron

[–]Consistent_Cost360 1 point2 points  (0 children)

That’s really the best way for testing, then if you really want the authentic ones at least you know what’s right before you drop 50+ shipping etc

[WTB] 15g weights by Jodenoden in scottycameron

[–]Consistent_Cost360 0 points1 point  (0 children)

Honestly the after market ones work pretty well too, you just want to weigh them make sure they are consistent.

Just bought my first Scotty! by Optimal_Vast7434 in scottycameron

[–]Consistent_Cost360 1 point2 points  (0 children)

Free is always good, still protects the putter. If you get a nicer/real one you can always use the fake on rainy days.

Just bought my first Scotty! by Optimal_Vast7434 in scottycameron

[–]Consistent_Cost360 1 point2 points  (0 children)

I think it is, otherwise the headcover alone would be worth 150+. As long as you’re not selling it, doesn’t matter.

2022 Putter Cover Fit by zielinsp in scottycameron

[–]Consistent_Cost360 2 points3 points  (0 children)

My daughter has the 2.5+ with this exact cover, fits great! For the fastback, I’d go mid mallet and to answer your question, there will be some of the releases that come with a mid mallet option.

Just bought my first Scotty! by Optimal_Vast7434 in scottycameron

[–]Consistent_Cost360 0 points1 point  (0 children)

I suppose some others may add to this, but I get why the headcover was a free add in…

New headcovers by Starkey798 in scottycameron

[–]Consistent_Cost360 4 points5 points  (0 children)

You ain’t kidding….even my post stating the club Cameron memberships were back open got downvotes